Philips MCD289/98 Quick start guide

Category
Home audio sets
Type
Quick start guide

Philips MCD289/98 is a versatile Hi-Fi system designed to enhance your home entertainment experience. With its DVD player and FM radio tuner, you can enjoy a wide range of audio and video content. The system also features a USB port, allowing you to connect external storage devices and play your favorite music files.

Setting up the device is easy, with clear instructions provided in the user manual. Once connected, you can navigate through the intuitive menu system using the included remote control.

The MCD289/98 supports both Dolby Digital and DTS audio formats, ensuring a rich and immersive sound experience. It also has various audio settings, such as bass boost and treble adjustment.

Philips MCD289/98 is a versatile Hi-Fi system designed to enhance your home entertainment experience. With its DVD player and FM radio tuner, you can enjoy a wide range of audio and video content. The system also features a USB port, allowing you to connect external storage devices and play your favorite music files.

Setting up the device is easy, with clear instructions provided in the user manual. Once connected, you can navigate through the intuitive menu system using the included remote control.

The MCD289/98 supports both Dolby Digital and DTS audio formats, ensuring a rich and immersive sound experience. It also has various audio settings, such as bass boost and treble adjustment.

SLOW
ANGLE
DISPLAY
MUTE
STANDBY-ON
MCD 289
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
1
Quick Start Guide
A/V cord (R/W/Y) Remote control with two AAA
batteries
FM wire antenna
AC power cord
(for subwoofer)
Stand
User manual
Quick start guide
Power adapter
(for main set)
MCD289 QUG_Eng-98 2008.3.19, 16:161
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
1
2
3
44
5
Tips
See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
In case of wireless connection failure
between the main set and subwoofer, see
the User Manual for manual pairing
(“Installation - Step 1: Connecting
speakers - Connecting the wireless
subwoofer”).
2
4
3
Connect the speaker cables.
Connect the FM antenna.
Connect the A/V cord to a TV.
Connect the power cords of the system and TV.
Setting up the TV
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on the TV and set it to the correct Video In channel.
SLOW
ANGLE
DISPLAY
MUTE
STANDBY-ON
1
5
Power on both the main set and subwoofer.
Wireless connection will set up automatically.
AC power
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Red
White
MCD289 QUG_Eng-98 2008.3.19, 16:162
1
2
3
4
In standby mode, press and hold CLOCK on the remote control.
When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the
hours.
Press CLOCK again and the minute digits flash. Then press VOLUME-/+ (VOL+/- on the
remote) to set the minutes.
Press CLOCK again to confirm the time setting.
Setting the clock
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
Tip
See chapters "Preparations" and "System
Menu Options" in the User Manual for
detailed descriptions.
SLOW
ANGLE
RDS
DISPLAY
MUTE
STANDBY-ON
DIVX (R) VOD
3D
DIGITAL AUDIO SETUP
ANALOG AUDIO SETUP
PICTURE SETTING
MCD289 QUG_Eng-98 2008.3.19, 16:163
Playing a disc
1
2
3
Insert a disc into the slot loader.
Make sure the label side is facing you.
Make sure you have removed any other disc from the slot loader.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote control) to select tuner source.
Press PROGRAM for more than two seconds to program all available stations in order of waveband.
Press PRESET ¡ / until the desired preset station is displayed.
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more to select USB (or USB on the remote control).
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
IMPORTANT!
Slide down to
expose some
buttons and jacks on
the front panel!
Tip
Detailed playback features and additional functions are
described in the accompany owner's manual.
PDCC-JS/JW-0804
P
r
i
n
t
e
d
S
i
d
e
MCD289 QUG_Eng-98 2008.3.19, 16:164
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCD289/98 Quick start guide

Category
Home audio sets
Type
Quick start guide

Philips MCD289/98 is a versatile Hi-Fi system designed to enhance your home entertainment experience. With its DVD player and FM radio tuner, you can enjoy a wide range of audio and video content. The system also features a USB port, allowing you to connect external storage devices and play your favorite music files.

Setting up the device is easy, with clear instructions provided in the user manual. Once connected, you can navigate through the intuitive menu system using the included remote control.

The MCD289/98 supports both Dolby Digital and DTS audio formats, ensuring a rich and immersive sound experience. It also has various audio settings, such as bass boost and treble adjustment.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI