1
INDEX
2
PRODUCT CONTAINS
FOREWORD
Multi-Functional Switch
*Select: turn left/right
*Enter/Set: press
C6P AC/DC Charger x1
DC Input Cable x1
Charge Cable x1
Instruction Manual x1
Balance Socket adapter x1
128x64 Pixel LCD Screen
Cooling Fan
Balance Port
Temperature Sensor Port
DC Input Socket
Charge Output Socket
Below items are included in the package, contact your supplier if any item is miss.
AC input Cable x1
W e t h a n k y o u f o r
purchasing CRC C6P
10A/100W 11-18V DC
AC Input Socket
We thank you for purchasing CRC C6P 10A/100W 110-230V/50Hz AC 11-18V DC
balance charger/discharger. For your convenience and safety, please read this
manual carefully before using this product.
CRC C6P AC/DC is a professional and high efficiency balance charger/discharger
which is especially designed for charging/discharging LiPo , LiFe, LiIo, NiMH,NiCd
and PB batteries.
3 4
SPECIFICATION
OPTIONAL ACCESSORIES
2x3S in series Adapter
FEATURES
High efficiency power conversion circuit. Special advanced charging
technology ensure a fast and precision charging performance.
The CRC balance charger series has a integrated cell balancer which can be
expecially used for charging the LiPo, Lilo, LiFe batteries.
10 battery profile memories, 1 default memory of latest profile, 9 custom
memories can be set and load by the user.
128x64 pixel LCD screen shows rich information: total current, total voltage,
charge capacity (mAh), charge time, temperature, cell voltage, cell voltage
difference etc.
Various functional settings can meet a wide range of use. Balance charging-
auto, balance charging-manual, normal charging, storage and discharging for
Lithium batteries. charging-auto, charging-manual, discharging for NiCd/NiMH
batteries. Charging and discharging for Pb batteries.
Various system settings: backlight, contrast, key sound, safty time, cut off
temperature, cut off capacity.
Full protection system: protection of reversed polarity (input and output),
higher/lower input voltage, battery temperature, over charge/discharge and
time limited.
AC Input voltage range:
DC Input voltage range:
Charge current range:
Discharge current range:
Maximum charge power:
Maximum discharge power:
Current drain for balancing:
Balance accuracy:
LiPo/LiIo/LiFe battery cell count:
NiCd/NiMH battery cell count:
Pb battery cell count:
Battery setup memories:
Temperature sensor:
Weight:
Dimension(LxWxD):
110-230V/50Hz
11.0-18.0V
0.5-10.0A
0.5-5.0A
100W @ 12V DC
10W
400mA
<10mV
1-6 series
1-15 series
1-10 series (2-20V)
10
Yes
685g
135x145x42mm
2x3S in series Adapter
2x2S in series Adapter
Temperature Sensor(magnet)
C6P is ONLY suitable for charge rechargeable LiPo, LiFe, LiIo,NiMH
and PB batteries. Do not attempt to charge dry cells. Charge other
types of batteries may cause fire or explosion.
Never leave the charger unattended when it is working. If you leave,
disconnect the battery to prevent any unexpected dangerous or
damage.
The prescript DC input voltage range from 11-18V. Never connect it to
any other power supply which is unsuitable.
Ensure program and settings match the battery pack, incorrect setting
to charge/discharge a battery may damage the battery, even would
cause a fire.
Protect charger from dust, dirt and damp. Do not attempt to
disassemble the charger, contact the after sales center for
maintenance if needed.
Never place the charger and batteries connected to it on any form of
flammable surface. Never operate the charger in the vicinity of
inflammable material or gas.
Ensure that there is an unrestricted airflow to and from the charger's
cooling slots.
Never charge or discharge any battery having evidence of leaking,
expansion/swelling, damaged outer cover or case, color-change or
distortion.
Take great care to maintain correct battery polarity, and avoid
shot-circuit. Read the battery manufacturer's instructions and adhere
to them strictly.
BATTERIES and MAX CHARGE CURRENTWARNING and NOTES
5 6
Battery Type No. of Cells Rated Voltage(V) Max Charge Current(A)
1 3.7 10.0
2 7.4 10.0
3 11.1 9.0
4 14.8 6.8
5 18.5 5.4
6 22.2 4.5
1 3.3 10.0
2 6.6 10.0
3 9.9 10.0
4 13.2 7.6
5 16.5 6.1
6 19.8 5.1
1 3.6 10.0
2 7.2 10.0
3 10.8 9.3
4 14.4 6.9
5 18 5.6
6 21.6 4.6
1 1.2 10.0
2 2.4 10.0
3 3.6 10.0
4 4.8 10.0
5 6 10.0
6 7.2 10.0
7 8.4 10.0
8 9.6 10.0
9 10.8 9.3
10 12 8.3
11 13.2 7.6
12 14.4 6.9
13 15.6 6.4
14 16.8 6.0
15 18 5.6
NiCd
LiPo
LiFe
LiIo
NiMH
Same as NiMH
7 8
1 2 10.0
2 4 10.0
3 6 10.0
4 8 10.0
5 10 10.0
6 12 8.3
7 14 7.1
8 16 6.3
9 18 5.6
10 20 5.0
Lipo
LiFe
LiIo
NiMH
NiCd
PB
Voltage Level: 1.2V/cell
Max Charge Voltage: 1.6V/Cell
Discharge Voltage Cut off Level: 0.85V/cell or Higher
Voltage Level: 1.2V/cell
Max Charge Voltage: 1.6V/Cell
Discharge Voltage Cut off Level: 1.0V/cell or Higher
Voltage Level: 2.0V/cell
Max Charge Voltage:2.45V/Cell
Discharge Voltage Cut off Level: 1.75V/cell or Higher
PB
Voltage Level: 3.7V/cell
Max Charge Voltage: 4.2V/Cell
Discharge Voltage Cut off Level: 3.0V/cell or Higher
Voltage Level: 3.3V/cell
Max Charge Voltage: 3.8V/Cell
Discharge Voltage Cut off Level: 2.0V/cell or Higher
Voltage Level: 3.6V/cell
Max Charge Voltage: 4.1V/Cell
Discharge Voltage Cut off Level: 3.0V/cell or Higher
SYSTEM SETTING
L i P o
BALcharge
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
standby
B a c k l i g h t
c o n t r a s t
k e y
s a v e
s y st e m s e tt i ng
s a f t y
t e m p
b a c k
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
B a c k l i g h t
c o n t r a s t
k e y
s a v e
s y st e m s e tt i ng
s a f t y
t e m p
b a c k
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
B a c k l i g h t
c o n t r a s t
k e y
s a v e
s y st e m s e tt i ng
s a f t y
t e m p
b a c k
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
B a c k l i g h t
c o n t r a s t
k e y
s a v e
s y st e m s e tt i ng
s a f t y
t e m p
b a c k
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
B a c k l i g h t
c o n t r a s t
k e y
s a v e
s y st e m s e tt i ng
s a f t y
t e m p
b a c k
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
L O A D 1
B a c k l i g h t
c o n t r a s t
k e y
s y st e m s e tt i ng
s a f t y
t e m p
6 0
8 0
o n
1 4 0
99
s o u n d
t i m e
cu t
off
c a p
cu t
off 5 0 0 0
c
m i n
m a h
s a v e b a c k
BACKLIGHT:
Range from 0-100%
*Select: turn left/right
*Enter/Set: press
CONTRAST:
Range from 0-100%
KEY SOUND:
On/Off optional
SAFTY TIME:
Charge/discharge time
limit, range from 10-990
minutes. Off=no limit.
TEMPERATURE CUTOFF:
Battery upper temperature
limit. Range from 20-99 °C.
Off=no limit.
CAPACITY CUTOFF:
Battery capacity protection.
Range from 500-9900 mAh.
Off=no limit.
STANDBY Menu
SYSTEM SETTING
Default memory(the parameter
setting of last work of the charger)
Press “START” charger will
directly work under default
memory.
Press “LOAD”, parameter will
change to the memory you load,
press “START” charger will work
under the setting of the memory.
B a c k l i g h t 6 0
9 10
CHARGE/DISCHARGE LIPO BATTERY
*Select: turn left/right
*Enter/Set: press
L i P o
BALcharge
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
s t a n d b y
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i p o
b a l c h a r g e
a u t o
1 0 0 0
4 2 0 0
L i P o
BALcharge
6 s
a6 91
v7 02 4
m a h1 9 5 8
381 2
c u rr e nt s ta t us
b a t
c 6
v c e l l v d i f f
4 1 3 8 m v20
c 5 4 1 3 5 m v1 7
c 4 4 1 3 0 m v1 2
c 3 4 1 2 5 m v7
c 2 4 1 2 0 m v2
c 1 4 1 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i p o
s t o r a g e
a u t o
1 0 0 0
3 8 5 0
L i P o
s t o r a g e
6 s
a6 92
v3 81 9
m a h1 9 5 8
389
c u rr e nt s ta t us
b a t
c 6
v c e l l v d i f f
3 2 3 8 m v2 0
c 5 3 2 3 5 m v1 7
c 4 3 2 3 0 m v1 2
c 3 3 2 2 5 m v7
c 2 3 2 2 0 m v2
c 1 3 2 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i p o
c h a r g e
a u t o
1 0 0 0
4 2 0 0
L i P o
c h a r g e
6 s
a6 92
v3 81 9
m a h1 9 5 8
389
c u rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i p o
d i s c h a r g e
a u t o
1 0 0 0
3 6 0 0
L i P o
discharge
6 s
a4 90
v3 81 9
m a h1 9 5 8
389
c u rr e nt s ta t us
c h a r g e
d i s c h a r g e
L O A D 1
s a v e s t a r t
1
s a v e s t a r t
1
s a v e s t a r t
1
s a v e s t a r t
1
c u rr e nt s ta t us
LIPO
BALCHARGE: Balance charge
STORAGE: Storage charge/discharge(balance connector optional)
CHARGE: Normal charge (balance connector not required)
DISCHARGE: Discharge (balance connector optional)
(balance connector required)
AUTO: Can be select in balance charge and storage mode
detect the cell count of the battery.
1: Charge/Discharge 1 cell battery(N/A in balance charge mode)
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
4: Charge/Discharge 4 cells battery
5: Charge/Discharge 5 cells battery
6: Charge/Discharge 6 cells battery
, charger can automatically
Important note: In non balance mode, charger can not detect the correct cell count of the
battery which has voltage intersection with the other one. So the cell count you set must be
exact the same as your battery, otherwise may cause dangerous situation.
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Terminal Voltage Control. Range from 4150-4250, change unit: 10, default: 4200
(Storage mode range from 3800-3900, default: 3850)
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
Parameter setting Working stutus
c
28
c
28
c
28
11
L i P o
BALcharge
6s
a6 91
v7 02 4
m a h1 9 5 8
3 81 2
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
4 1 3 8 m v20
c 5 4 1 3 5 m v1 7
c 4 4 1 3 0 m v1 2
c 3 4 1 2 5 m v7
c 2 4 1 2 0 m v2
c 1 4 1 1 8 m v0
cu rr e nt s ta t us
Working status specify
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery cells
Cell voltage
Cell voltage difference
Working Finished
L i P o
B A L c h a r g e
6s
a6 90
v192 5
m a h2 2 5 8
3 81 8
c u rr e nt s ta t us
bat
c 6
v c e l l v d i f f
4 2 0 0 m v4
c 5 4 1 9 7 m v1
c 4 4 1 9 9 m v3
c 3 4 1 9 8 m v2
c 2 4 1 9 6 m v0
c 1 4 1 9 8 m v2
c u rr e nt s ta t us
Balance Charge
L i P o
s t o r a g e
6s
a6 92
v3 81 9
m a h1 9 5 8
3 89
c u rr e nt s ta t us
b a t
c 6
v c e l l v d i f f
3 2 3 8 m v2 0
c 5 3 2 3 5 m v1 7
c 4 3 2 3 0 m v1 2
c 3 3 2 2 5 m v7
c 2 3 2 2 0 m v2
c 1 3 2 1 8 m v0
Working FinishedStorage
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Cell voltage
Cell voltage difference
Battery cells
L i P o
s t o r a g e
6s
a4 50
v0 92 3
m a h2 0 5 8
3 81 6
c u rr e nt s ta t us
bat
c 6
v c e l l v d i f f
3 8 4 8 m v3
c 5 3 8 4 6 m v1
c 4 3 8 4 5 m v0
c 3 3 8 4 9 m v4
c 2 3 8 5 0 m v5
c 1 3 8 4 8 m v3
*Display stop along with “Bi...Bi...” sound
L i P o
charge
6s
a6 92
v3 81 9
m a h1 9 5 8
3 89
c u rr e nt s ta t us
L i P o
d i s c h a r g e
6s
a4 90
v3 81 9
m a h1 9 5 8
3 89
c u rr e nt s ta t us
Working Finished
Working Finished
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Discharged capacity
Timer
L i P o
c h a r g e
6s
a6 90
v3 81 9
m a h1 9 5 8
3 81 5
c u rr e nt s ta t us
F I N I S H E D
L i P o
d i s c h a r g e
6s
a3 90
v3 81 9
m a h2 0 5 8
3 81 5
c u rr e nt s ta t us
F I N I S H E D
Charge
Discharge
CHARGE/DISCHARGE LIFE BATTERY
*Select: turn left/right
*Enter/Set: press
LIFE
BALCHARGE: Balance charge(balance connector required)
STORAGE: Storage charge/discharge(balance connector optional)
CHARGE: Normal charge (balance connector not required)
DISCHARGE: Discharge (balance connector optional)
Parameter setting Working status
B A T T
M O D E
T Y P E
SC E L L
s a v e
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i f e
b a l c h a r g e
a u t o
1 0 0 0
3 6 0 0
s t a r t
L i f e
BALcharge
6s
a6 91
v1 02 1
m a h1 9 5 8
3 81 2
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
3 1 3 8 m v20
c 5 3 1 3 5 m v1 7
c 4 3 1 3 0 m v1 2
c 3 3 1 2 5 m v7
c 2 3 1 2 0 m v2
c 1 3 1 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i f e
s t o r a g e
a u t o
1 0 0 0
3 2 5 0
L i f e
s t o r a g e
6s
a6 92
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
2 2 3 8 m v2 0
c 5 2 2 3 5 m v1 7
c 4 2 2 3 0 m v1 2
c 3 2 2 2 5 m v7
c 2 2 2 2 0 m v2
c 1 2 2 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i f e
c h a r g e
a u t o
1 0 0 0
3 6 0 0
L i f e
c h a r g e
6s
a6 92
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i f e
d i s c h a r g e
a u t o
1 0 0 0
3 2 0 0
L i f e
d i s c h a r g e
6s
a6 90
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
1
s a v e s t a r t
1
s a v e s t a r t
1
s a v e s t a r t
1
L i F E
B A L c h a r g e
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
s t a n d b y
L O A D 1
Note: When finished, disconnect the charge cable, working along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
12
charge
d i s c h a r g e
c h a r g e
d i s c h a r g e
c
2 8
External temperature
c
2 8
External temperature
c
2 8
External temperature
c
2 8
c
2 8
c
2 8
Working status specify
Working FinishedBalance Charge
Working FinishedStorage
Working Finished
Working Finished
Charge
Discharge
AUTO: Can be select in balance charge and storage mode
detect the cell count of the battery.
1: Charge/Discharge 1 cell battery(N/A in balance charge mode)
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
4: Charge/Discharge 4 cells battery
5: Charge/Discharge 5 cells battery
6: Charge/Discharge 6 cells battery
, charger can automatically
Important note: In non balance mode, charger can not detect the correct cell count of the
battery which has voltage intersection with the other one. So the cell count you set must be
exact the same as your battery, otherwise may cause dangerous situation.
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Terminal Voltage Control. Range from 3550-3650, change unit: 10, default: 4200
(Storage mode range from 3200-3300, default: 3250)
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
L i f e
B A L c h a r g e
6 s
a6 92
v1 021
m a h1 9 5 8
381 2
cu rr e nt s ta t us
bat
c6
v c e l l v d i f f
3 1 3 8 m v20
c 5 3 1 3 5 m v1 7
c 4 3 1 3 0 m v1 2
c 3 3 1 2 5 m v7
c 2 3 1 2 0 m v2
c 1 3 1 1 8 m v0
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
L i f e
s t o r a g e
6 s
a6 92
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
bat
c6
v c e l l v d i f f
2 2 3 8 m v2 0
c 5 2 2 3 5 m v1 7
c 4 2 2 3 0 m v1 2
c 3 2 2 2 5 m v7
c 2 2 2 2 0 m v2
c 1 2 2 1 8 m v0
L i f e
c h a r g e
6 s
a6 92
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
L i f e
d i s c h a r g e
6 s
a6 90
v7 81 5
m a h1 9 5 8
389
cu rr e nt s ta t us
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
L i f e
B A L c h a r g e
6s
a6 91
v5 921
m a h2 2 5 8
3 81 9
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
3 6 0 0 m v5
c 5 3 5 9 8 m v3
c 4 3 5 9 7 m v2
c 3 3 5 9 6 m v1
c 2 3 5 9 9 m v4
c 1 3 5 9 5 m v0
L i f e
storage
6s
a6 90
v4 919
m a h
2 0 5 8
3 81 9
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
32 50 m v
c 5 3 2 4 9 m v
c 4 3 2 4 7 m v
c 3 3 2 4 6 m v
c 2 3 2 4 8 m v
c 1 3 2 4 5 m v
L i f e
c h a r g e
6s
a6 90
v4 91 9
m a h20 5 8
3 81 9
cu rr e nt s ta t us
F i n i s h e d
L i f e
d i s c h a r g e
6s
a4 90
v5 01 4
m a h2 0 5 8
3 81 9
cu rr e nt s ta t us
Battery cells
Cell voltage
Cell voltage difference
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery cells
Cell voltage
Cell voltage difference
5
4
2
1
3
0
F i n i s h e d
Note: When finished, disconnect the charge cable, working along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
13 14
c h a r g e
d i s c h a r g e
c
28
External temperature
c
28
External temperature
c
28
External temperature
c
2 8
c
2 8
c
28
CHARGE/DISCHARGE LIIO BATTERY
*Select: turn left/right
*Enter/Set: press
LIIO
BALCHARGE: Balance charge(balance connector required)
STORAGE: Storage charge/discharge(balance connector optional)
CHARGE: Normal charge (balance connector not required)
DISCHARGE: Discharge (balance connector optional)
AUTO: Can be select in balance charge and storage mode
detect the cell count of the battery.
1: Charge/Discharge 1 cell battery(N/A in balance charge mode)
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
4: Charge/Discharge 4 cells battery
5: Charge/Discharge 5 cells battery
6: Charge/Discharge 6 cells battery
, charger can automatically
Important note: In non balance mode, charger can not detect the correct cell count of the
battery which has voltage intersection with the other one. So the cell count you set must be
exact the same as your battery, otherwise may cause dangerous situation.
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Terminal Voltage Control. Range from 4050-4150, change unit: 10, default: 4200
(Storage mode range from 3700-3800, default: 3750)
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
Parameter setting Working status
L i i o
B A L c h a r g e
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
standby
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i i o
b a l c h a r g e
a u t o
10 0 0
4 1 0 0
L i i o
B A L c h a r g e
6s
a6 91
v1 02 4
m a h1 9 5 8
3 81 2
c u rr e nt s ta t us
b a t
c 6
v c e l l v d i f f
4 0 3 8 m v2 0
c 5 4 0 3 5 m v1 7
c 4 4 0 3 0 m v1 2
c 3 4 0 2 5 m v7
c 2 4 0 2 0 m v2
c 1 4 0 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i i o
s t o r a g e
a u t o
10 0 0
3 7 5 0
L i i o
s t o r a g e
6s
a6 92
v7 81 8
m a h1 9 5 8
3 89
c u rr e nt s ta t us
b a t
c 6
v c e l l v d i f f
3 1 3 8 m v20
c 5 3 1 3 5 m v1 7
c 4 3 1 3 0 m v1 2
c 3 3 1 2 5 m v7
c 2 3 1 2 0 m v2
c 1 3 1 1 8 m v0
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i i o
c h a r g e
a u t o
10 0 0
4 1 0 0
L i i o
charge
6s
a6 92
v7 81 8
m a h1 9 5 8
3 89
c u rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
l i i o
d i s c h a r g e
a u t o
10 0 0
3 5 0 0
L i i o
d i s c h a r g e
6s
a5 90
v
78
18
m a h1 9 5 8
3 89
c u rr e nt s ta t us
L O A D 1
s a v e s t a r t
1
s a v e s t a r t
1
s a v e s t a r t
1
s a v e s t a r t
1
15 16
c h a r g e
d i s c h a r g e
c
28
c
28
c
28
Working status specify
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery cells
Cell voltage
Cell voltage difference
Working FinishedBalance Charge
Working FinishedStorage
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Cell voltage
Cell voltage difference
Battery cells
Working Finished
Working Finished
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Discharged capacity
Timer
Charge
Discharge
L i i o
B A L c h a r g e
6 s
a6 92
v1024
m a h1 9 5 8
381 2
cu rr e nt s ta t us
b a t
c6
v c e l l v d i f f
4 0 3 8 m v2 0
c 5 4 0 3 5 m v1 7
c 4 4 0 3 0 m v1 2
c 3 4 0 2 5 m v7
c 2 4 0 2 0 m v2
c 1 4 0 1 8 m v0
Li io
s t o r a g e
6s
a6 92
v7 81 8
m a h1 9 5 8
3 89
c u rr e nt s ta t us
bat
c 6
v c e l l v d i f f
3 1 3 8 m v2 0
c 5 3 1 3 5 m v1 7
c 4 3 1 3 0 m v1 2
c 3 3 1 2 5 m v7
c 2 3 1 2 0 m v2
c 1 3 1 1 8 m v0
Li io
c h a r g e
6s
a6 92
v7 81 8
m a h1 9 5 8
3 89
c u rr e nt s ta t us
Li io
d i s c h a r g e
6s
a5 90
v
78
18
m a h1 9 5 8
3 89
c u rr e nt s ta t us
L i i o
s t o r a g e
6s
a6 90
v7 81 8
m a h
3 81 9
c u rr e nt s ta t us
bat
c 6
v c e l l v d i f f
3 7 4 8 m v2
c 5 3 7 4 9 m v3
c 4 3 7 4 8 m v2
c 3 3 7 4 7 m v4
c 2 3 7 4 6 m v0
c 1 3 7 4 9 m v3
L i i o
B A L c h a r g e
6s
a6 90
v5 92 4
m a h2 0 5 8
3 81 2
c u rr e nt s ta t us
bat
c 6
v c e l l v d i f f
4 0 9 8 m v3
c 5 4 0 9 9 m v4
c 4 4 0 9 9 m v4
c 3 4 0 9 6 m v1
c 2 4 0 9 5 m v0
c 1 4 0 9 7 m v2
L i i o
c h a r g e
6s
a6 90
v5 92 4
m a h
3 8
19
c u rr e nt s ta t us
L i i o
d i s c h a r g e
6s
a3 90
v
78
18
m a h2 0 5 8
3 8
19
c u rr e nt s ta t us
F i n i s h e d
F i n i s h e d
2 0 5 8
2 0 5 8
CHARGE/DISCHARGE NIMH BATTERY
*Select: turn left/right
*Enter/Set: press
NIMH
CHARGE: Charge
DISCHARGE: Discharge
Parameter setting Working status
N I M H
c h a r g e
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
s t a n d b y
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
N i m h
c h a r g e
a u t o
1 0 0 0
n i m h
charge
a692
v7 81 8
m a h1 9 5 8
389
c u rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
n i m h
d i s c h a r g e
a u t o
1 0 0 0
n i m h
d i s c h a r g e
1 0 s
a69
0
v
78
1 8
m a h1 9 5 8
389
c u rr e nt s ta t us
L O A D 1
s a v e s t a r t
1
s a v e s t a r t
1
AUTO: Charger automatically detect
1: Charge/Discharge 1 cell battery
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
.
.
.
15:
the cell count of the battery.
Charge/Discharge 15 cells battery
Important note: Charger can not detect the correct cell count of the battery which has
voltage intersection with the other one. So the cell count you set must be exact the same as
your battery, otherwise may cause dangerous situation.
1 0 s
Note: When finished, disconnect the charge cable, working along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
17 18
charge
d i s c h a r g e
charge
d i s c h a r g e
1 0 0 0
c
28
External temperature
c
28
External temperature
c
28
External temperature
c
2 8
c
2 8
c
2 8
c
2 8
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
Working status specify
Working Finished
n i m h
charge
a693
v7 81 0
m a h1 9 5 8
389
c u rr e nt s ta t us
n i m h
d i s c h a r g e
1 0 s
a69
v
78
1 3
m a h1 9 5 8
389
c u rr e nt s ta t us
1 0 s
n i m h
c h a r g e
a690
v7 81 5
m a h2 9 5 8
382 9
cu rr e nt s ta t us
n i m h
d i s c h a r g e
1 0 s
a
0
v
7 8
1 0
m a h2 9 5 8
3 829
cu rr e nt s ta t us
1 0 s
F i n i s h e d
F i n i s h e d
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Timer
Charge
Discharge
Discharged capacity
Note: When finished, disconnect the charge cable, working along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
CHARGE/DISCHARGE NICD BATTERY
*Select: turn left/right
*Enter/Set: press
Parameter setting Working status
N I C D
c h a r g e
A u t o
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
s t a n d b y
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
N i c d
c h a r g e
a u t o
1 0 0 0
n i c d
charge
a692
v7 81 8
m a h1 9 5 8
389
c u rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
n i c d
d i s c h a r g e
a u t o
1 0 0 0
n i c d
d i s c h a r g e
1 0 s
a69
0
v
78
1 8
m a h1 9 5 8
389
c u rr e nt s ta t us
L O A D 1
s a v e s t a r t
1
s a v e s t a r t
1
1 0 s
039
19 20
c h a r g e
d i s c h a r g e
c h a r g e
d i s c h a r g e
Terminal Voltage Control. Only available in discharge mode Range from 800-1200, change
unit: 10, default: 1000
8 5 0
c
28
External temperature
c
28
NICD
CHARGE: Charge
DISCHARGE: Discharge
AUTO: Charger automatically detect
1: Charge/Discharge 1 cell battery
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
.
.
.
15:
the cell count of the battery.
Charge/Discharge 15 cells battery
Important note: Charger can not detect the correct cell count of the battery which has
voltage intersection with the other one. So the cell count you set must be exact the same as
your battery, otherwise may cause dangerous situation.
Working Finished
Working Finished
n i c d
charge
a693
v7 81 0
m a h1 9 5 8
389
c u rr e nt s ta t us
n i c d
d i s c h a r g e
1 0 s
a69
0
v
78
1 3
m a h1 9 5 8
389
c u rr e nt s ta t us
1 0 s
n i c d
c h a r g e
a690
v7 81 5
m a h2 9 5 8
382 9
cu rr e nt s ta t us
n i c d
d i s c h a r g e
1 0 s
a39
0
v
7 8
1 0
m a h2 9 5 8
3 829
cu rr e nt s ta t us
1 0 s
F i n i s h e d
F i n i s h e d
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Timer
Charge
Discharge
Discharged capacity
Note: When finished, disconnect the charge cable, working along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
CHARGE/DISCHARGE PB BATTERY
*Select: turn left/right
*Enter/Set: press
Parameter setting Working status
P B
c h a r g e
1 0 S
a0 01 0
v0 00
m a h0
0 00 0 s y s m e n u s t a r t
s t a n d b y
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
P B
c h a r g e
a u t o
1 0 0 0
P B
charge
a692
v7 81 8
m a h1 9 5 8
389
c u rr e nt s ta t us
B A T T
M O D E
T Y P E
SC E L L
p a ra m et e r s e tt in g
aC U R R E N T
m vtv c
b a c k
P B
d i s c h a r g e
a u t o
1 0 0 0
P B
d i s c h a r g e
1 0 s
a69
0
v
78
1 8
m a h1 9 5 8
389
c u rr e nt s ta t us
L O A D 1
s a v e s t a r t
1
s a v e s t a r t
1
1 0 s
21 22
c h a r g e
d i s c h a r g e
charge
d i s c h a r g e
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
Working status specify
Terminal Voltage Control. Only available in discharge mode Range from 650-1050, change
unit: 10, default: 1000
1 7 5 0
c
2 8
External temperature c
2 8
c
2 8
Working Finished
PB
CHARGE: Charge
DISCHARGE: Discharge
AUTO: Charger automatically detect
1: Charge/Discharge 1 cell battery
2: Charge/Discharge 2 cells battery
3: Charge/Discharge 2 cells battery
.
.
.
10:
the cell count of the battery.
Charge/Discharge 10cells battery
Important note: Charger can not detect the correct cell count of the battery which has
voltage intersection with the other one. So the cell count you set must be exact the same as
your battery, otherwise may cause dangerous situation.
Working Finished
P B
charge
a693
v7 81 8
m a h1 9 5 8
389
c u rr e nt s ta t us
P B
d i s c h a r g e
1 0 s
a69
0
v
78
2 0
m a h1 9 5 8
389
c u rr e nt s ta t us
1 0 s
P B
c h a r g e
a690
v4 82 4
m a h2 9 5 8
382 9
cu rr e nt s ta t us
P B
d i s c h a r g e
1 0 s
a39
0
v
7 8
1 7
m a h2 9 5 8
3 829
cu rr e nt s ta t us
1 0 s
F i n i s h e d
F i n i s h e d
Battery
Working Mode
Current
Total Voltage
Charged capacity
Timer
Battery
Working Mode
Current
Total Voltage
Timer
Charge
Discharge
Discharged capacity
Note: When working finished, disconnect the charge cable, along with “Bi...Bi...Bi...”
sound, screen return to “STANDBY” menu.
*Display stop along with “Bi...Bi...” sound
*Display stop along with “Bi...Bi...” sound
NOTES OF WORK STATUS
Note:
1, Press “START” or during working, if input voltage is higher than 18.0V, charger will
display “HIGHER INPUT VOLTAGE” along with
4, If battery’s total voltage is lower than the discharge cutoff level, charger will display
“LOWER TOTAL VOLTAGE”
6,
7,Disconnect the charge cable during working status, charger will display “CONNECTION
ERROR” along with “Bi...Bi...Bi...” sound.
8, In “BALCHARGE” mode, disconnect the balance connector, charger will display
“BALANCE ERROR”
9, In “CHARGE” mode, plug in balance connector, charger will automatically shift to
“Balance charge” mode. D
, In “DISCHARGE” and “STORAGE” mode,
Remark:
1, Once the charger report error, press “ENTER” to return “STANDBY” Menu.
2,Screen diagram shows in this manual only for reference, and will be different in each use.
“Bi...Bi...Bi...” sound.
2, Press “START” or during working, if input voltage is lower than 11.0V, charger will display
“LOWER INPUT VOLTAGE” along with “Bi...Bi...Bi...” sound.
3, If output connection reverse, charger will display “REVERSE OUTPUT” along with
“Bi...Bi...Bi...” sound.
along with “Bi...Bi...Bi...” sound.
5, If battery’s cell voltage is lower than the discharge cutoff level, charger will display
“LOWER CELL VOLTAGE” along with “Bi...Bi...Bi...” sound.
If battery detected by the charger is different from your setting, charger MAY display
“BATTERY ERROR” along with “Bi...Bi...Bi...” sound.
along with “Bi...Bi...Bi...” sound.
isconnect the balance connector, charger will display “BALANCE
ERROR” along with “Bi...Bi...Bi...” sound.
10 plug in balance connector, charger will
display cell voltage. Disconnect the balance connector, charger will display “BALANCE
ERROR” along with “Bi...Bi...Bi...” sound.
23 24
c h a r g e
d i s c h a r g e
Setting the max charge/discharge current. Range from 0.5-10, change unit: 0.5
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under current setting.
Back to “STANDBY” menu.
Working status specify
Terminal Voltage Control. Only available in discharge mode Range from 1550-1950,
change unit: 10, default: 1750
2 8
External temperature c2 8 c
Working Finished
BATTERY IN SERIES CHARGE
You can charge and balance several Lithium batteries at the same time, by
using optional 2x2S(2x3S) in series adaptor. Please note that the battery
packs being charged should have same capacity and cell-count.
WARRANTY
CRC provide a period of one year product warranty from the date of
purchase. The warranty only applies to material or operational defects,
which are present at the time of purchase.
During that period, we will repair or replace free of service charge for
products deemed defective due to those causes. This warranty is not valid
for any damage or subsequent damage arising as a result of misuse,
modification or as a result of failure to observe the use guideline in this
manual.
LIABILITY EXCLUSION
C6P is designed and approved exclusively for charge the types of battery
stated in this manual. CRC do not accept any liability if the charger is used
for any purpose other than that stated. We are unable to ensure you follow
the instructions come with the charger, and we have no control over the
methods you employ for using, operating and maintaining this device. For
this reason we are obliged to deny the liability for loss, damage or costs
which are incurred due to the incompetent or incorrect use and operation of
this product, or which are connected with such operation in any way. Unless
otherwise prescribed by law, our obligation to pay compensation, regardless
of the legal argument employed, is limited to the invoice value of those
CRC products which were immediately and directly involved in the event in
which the damage occurred.
25 26
CONFORMITY DECLARATION
Application Test Standard
Title Result
CE-LVD EN60335 For safety of household and similar electrical
appliances. Conform
EN55014-1:2006
Electromagnetic compatibility-Requirements
for household appliances,electric tools and
Similar apparaturs - Part 1: Emission
Conform
EN55014-2:1997 +A1:2001
Electromagnetic compatibility-Requirements
for household appliances,electric tools and
Similar apparaturs - Part 2: Immunity-Product
family standard
Conform
EN61000-6-1(2007)
Electromagnetic compatibility (EMC) -- Part 6-1:
Generic standards - Immunity for residential,
commercial and light-industrial environments.
Conform
EN61000-6-3(2007)
Electromagnetic compatibility (EMC) -- Part
6-3: Genericstandards - Emission standard
for residential, commercial andlight-industrial
environments.
Conform
FCC-VOC FCC Part 15B Electromagnetic compatibility (EMC),
Conduction Emission & Radiation Emission Conform
C6P satisfies all relevant and mandatory EC directives and FCC Part 15 Subpart B: 2008.
The product has been tested to meet the following technical standards:
CE-EMC
SHENZHEN CASAL TECHNOLOGY CO.,LTD
This symbol means that you must dispose of electrical devices from the general household waste when it
reaches the end of its useful life. Take your charger to your local waste collection point or recycling centre.
This applies to all countries of the European Union, and to other European countries with a separate waste
collection system.
27 28
CRC PRODUCT SUMMARY
C6S 10A/80W DC C6P 10A/100W DC
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Horizon PASSPORT Ultra Duo User manual
-
Skyrc Q200 User manual
-
Horizon DYNC2015 User manual
-
Common Sense RC ACDC-6 Operating instructions
-
Common Sense RC ACDC-6 Operating instructions
-
Skyrc Ultimate 1000W User manual
-
-
-
-
Common Sense RC ACDC-6 Operating instructions
