Hunter Engineering 6259-T Quick start guide
- Type
- Quick start guide
Hunter Engineering 6259-T is a versatile wheel balancer designed to meet the demands of busy tire shops. With its user-friendly interface, advanced features, and rugged construction, the 6259-T is the perfect choice for shops looking to improve their efficiency and accuracy.
Some of the key features of the 6259-T include:
- Easy-to-use display panel: The 6259-T features a large, easy-to-read display panel that provides clear instructions and guidance throughout the balancing process. The panel also displays wheel dimensions and weight placement information, making it easy to ensure that the wheel is balanced correctly.
Hunter Engineering 6259-T is a versatile wheel balancer designed to meet the demands of busy tire shops. With its user-friendly interface, advanced features, and rugged construction, the 6259-T is the perfect choice for shops looking to improve their efficiency and accuracy.
Some of the key features of the 6259-T include:
- Easy-to-use display panel: The 6259-T features a large, easy-to-read display panel that provides clear instructions and guidance throughout the balancing process. The panel also displays wheel dimensions and weight placement information, making it easy to ensure that the wheel is balanced correctly.
DSP7705
Rugged economy balancer
Easy-to-use display panel speeds balancing
Wheel Dimension Entry
Enables quick entry of
wheel width, diameter
and offset
Soft Key Controls
Provides easy navigation
through balancing
procedures with simple
icon-based buttons
Weight Placement
Display
Shows the amount of
weight needed and exact
placement on the wheel
Balancing Input Display
Displays wheel dimensions and weight
mode in an easy-to-understand interface
Operations Placard
Convenient operational instructions help
new employees get up to speed quickly
Hunter's DSP7705 wheel balancer is perfect for the
quality-conscious, economically oriented shop with a
lower volume of service.
Easily handles extra-wide specialty wheels
Services up to 150-lb. wheels repeatedly
without overheating
Exclusive features make balancing easier
Split Spoke
®
& Split Weight
®
Modes
Rugged Economy Balancer
Automatic Inner Dataset
®
Arm
Offers multiple weight choices
Automatically locates the best out-of-sight
position on custom wheels
Provides automatic "direct measure"
for alloy wheel modes
Eliminates manual data entry errors
CenteringCheck
®
Verification
Balancer tells you if the wheel is properly
centered before you proceed with the work
Eliminates the #1 cause of comebacks
Servo Stop Drive Control
Automatically rotates and holds wheel
at optimal weight-application position
Saves time and increases balancing accuracy
2005
Form 6259-T, 05/15
Supersedes 6259-T, 07/14
0515GAP4M.30
Copyright © 2015, Hunter Engineering Company
www.hunter.com
Specifications
*
Balancers do not include wheel adaptor kits as standard
equipment. For a complete list of kits to choose from that
match your service needs, see form 3203-T.
A
Floor space and dimensions
A 60.04" (1525 mm) C 31.32" (796 mm)
B 45.40" (1153 mm)
C
B
Because of continuing technological advancements, specifications,
models and options are subject to change without notice.
CenteringCheck, Dataset, Split Spoke, and Split Weight
are registered trademarks of Hunter Engineering Company.
Be sure to check out other
Hunter literature for more
quality products from
Hunter Engineering.
Options
Power requirements
110V, 6 amp usage,
50/60-Hz, 1 ph
Capacity
Rim width 1.5 - 20" (38 - 508 mm)
Rim diameter 10 - 24.5" (254 - 762 mm)
ALU 7.5 - 38" (191 - 965 mm)
Automatic Inner
Dataset
®
range
10 - 28" (254 - 711 mm)
Maximum tire diameter 44" (1118 mm )
Maximum tire width 20" (508 mm)
Maximum tire weight 150 lbs. (68 kg)
Imbalance resolution
+
/-0.05 oz. or 1 g
Placement accuracy
512 positions (+/-0.07˚)
Balancing speed
150 rpm
Motor
"Intelligent" programmable
drive system and DC motor
Shipping weight
450 lbs. (204 kg)
* Some dimensions, capacities and specifications may vary depending on
tire and wheel configurations.
Basic adaptor kits
20-1167-1
Standard taper
(4) Standard taper cones
20-1626-1
Low taper
(7) Low taper cones
Preferred adaptor kits
20-1910-1
Standard taper
(4) Standard taper cones, (4) in-between
cones, steel spacer ring, multi-fit flange
plate, stud kit and storage rack
20-1911-1
Low taper
(7) Low taper cones, (4) in-between
cones, steel spacer ring, multi-fit flange
plate, stud kit and storage rack
Wheel lift
20-3101-1
Wheel lift option can be installed on
existing balancers
-
1
-
2
-
3
-
4
Hunter Engineering 6259-T Quick start guide
- Type
- Quick start guide
Hunter Engineering 6259-T is a versatile wheel balancer designed to meet the demands of busy tire shops. With its user-friendly interface, advanced features, and rugged construction, the 6259-T is the perfect choice for shops looking to improve their efficiency and accuracy.
Some of the key features of the 6259-T include:
- Easy-to-use display panel: The 6259-T features a large, easy-to-read display panel that provides clear instructions and guidance throughout the balancing process. The panel also displays wheel dimensions and weight placement information, making it easy to ensure that the wheel is balanced correctly.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hunter Engineering DSP9200 Quick start guide
-
-
-
-
-
-
-
-
-
Other documents
-
Trademark Innovations 9CONE-MIX-6PK Operating instructions
-
Snap-On EEWB330A Operating Instructions Manual
-
-
Ranger DST-64T Owner's manual
-
-
-
Hunter DSP9100 User manual
-
-
Ranger Products DST642D Owner's manual
-
