Audio CrossPlay
User Manual
1
Introduction
The Audio CrossPlay by Cables To Go is ideal for sharing portable devices among
different outputs. It is also ideal for sharing two separate portable audio devices between
two users. With a simple touch of a button you can send one or both of the audio inputs
over either audio output. Plug in two different MP3 players and listen to one or both over
your headphones, speakers, or both. Or, connect your laptop or desktop and switch
between your headphones and speakers without having to disconnect your
speakers/headphones each time. The convenient mute feature allows you to mute each
output independently so you can leave everything connected even when not in use. With
the Audio CrossPlay, the possibilities are abundant!
Some examples of applications include:
• Switch between connected inputs and outputs to utilize all your portable audio
equipment easily
• Share one speaker and headphone set between two computers
• Perfect for desktop/laptop users to listen to computer audio files over the
computer speakers while using a headset to talk on a VOIP chat
• Plug in an iPod™ and a Creative Zen™ and listen to either one over the speakers
or headphones, or both! Or, listen to the Zen through the headphones and the
iPod through the speakers at the same time.
• Use in the car to plug in a DVD player and an MP3 player and two headphones.
You can now have two users share the same audio output or a listen to a different
audio output over separate headphones without disturbing other passengers
• Ideal in commercial applications to distribute two different audio sources over
two different audio devices.
• Share audio devices between headphones and your home audio system.
Features
• Fits in the palm of your hand making a truly portable solution
• Connect up to two 3.5mm (1/8 inch) output devices such as speakers, headphones,
audio jack on computer
• Connect up to two 3.5mm (1/8 inch) input devices such as an MP3 player, CD
player, laptop, desktop, DVD player
Package Contents
• Audio CrossPlay
• (2) Two 3.5mm cables (90cm)
• USB Mini-B to 5V DC adapter
• USB A Male to USB Mini-B Male cable (90cm)
• User Manual
2
Installation
1. Connect the USB Mini-B end of the wall charger to the Audio CrossPlay and plug
the other end into a wall outlet. Or connect the USB Mini-B end of the USB
cable into the Audio CrossPlay and the USB A Male end into an available USB
port on your computer.
2. Connect your audio inputs such as your MP3 players, CD/DVD players into the
ports labeled In1 and In2 using 3.5mm (1/8 inch) audio cables.
3. Connect your audio outputs such as your headphone and speakers into the ports
labeled Out1 and Out2 using standard 3.5mm (1/8 inch) audio cables.
4. You can now listen to your audio inputs on either of the audio outputs. You can
listen to one or both inputs over one or both outputs simultaneously. Or you can
independently mute one or both inputs at the same time when not in use.
Please note: Only one 3.5mm audio cable is included. Additional cables can be
purchased at www.cablestogo.com if needed. Part #21062 or #27068 are two of the
50 3.5mm cables offered on out website.
Application Diagrams
3
3555 Kettering Blvd.
Moraine, Ohio 45439
800-293-4970
www.cablestogo.com
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Conceptronic C08-175 User manual
-
iogear G2L5203A Datasheet
-
Altec Lansing FX5051 User manual
-
Belkin F2E9142-WHT-APL User manual
-
Korg GEC5 User manual
-
Trevi 0CM58006 Datasheet
-
Logitech 915-000139 Datasheet
-
Cary Audio Design AiOS Owner's manual
-
-