RIDGID DWV010 Owner's manual

Category
Vacuum cleaners
Type
Owner's manual

This manual is also suitable for

WD1255BR0
WD1256BR0
45 LITER/12 U.S. GALLON
WET/DRY VAC
Part No. SP6823 Printed in Mexico
OWNER’S MANUAL
FOR QUESTIONS OR INFORMATION CONTACT US AT
0800 77 10 007 from Brazil
www.ridgid.com.br
SAVE THIS MANUAL FOR FUTURE REFERENCE
WARNING:
To reduce the risk of injury, the user must read and understand the owner’s manual
before using this product.
!
Thank you for buying a RIDGID product.
Português - página 1
Español - página 17
English - page 33
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 33
34
Table of Contents
Important Safety Instructions. . . . . . . . 34
Introduction . . . . . . . . . . . . . . . . . . . . . 36
Unpacking and Checking
Carton Contents . . . . . . . . . . . . . . . . 36
Caster/Caster Foot Assembly . . . . . . . 36
Filter Removal and Installation . . . . . . 37
Wet/Dry Vac Assembly . . . . . . . . . . . . 38
Insert Hose. . . . . . . . . . . . . . . . . . . . 38
To Store Your Accessories. . . . . . . . . . 39
Operation. . . . . . . . . . . . . . . . . . . . . . . 39
Vacuuming Dry Materials . . . . . . . . . 40
Vacuuming Liquids . . . . . . . . . . . . . . 40
Emptying the Drum . . . . . . . . . . . . . 41
Moving the Wet/Dry Vac. . . . . . . . . . 41
Blowing Feature . . . . . . . . . . . . . . . . 41
Maintenance . . . . . . . . . . . . . . . . . . . . 42
Filter . . . . . . . . . . . . . . . . . . . . . . . . . 42
Cleaning and Disinfecting
the Wet/Dry Vac . . . . . . . . . . . . . . 43
Cord Maintenance . . . . . . . . . . . . . . 43
Storage. . . . . . . . . . . . . . . . . . . . . . . 43
Casters . . . . . . . . . . . . . . . . . . . . . . . 43
Repair Parts. . . . . . . . . . . . . . . . . . . . . 44
Warranty . . . . . . . . . . . . . . . . . . . . . . . 48
IMPORTANT SAFETY INSTRUCTIONS
Section Page
Section Page
Safety is a combination of using common
sense, staying alert, and knowing how your
Wet/Dry Vacuum cleaner (“Vac”) works.
Safety Signal Words
DANGER: Indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
When using your Vac, always follow basic
safety precautions including the following:
WARNING
- Check voltage of receptacle before
plugging cord in. Do not plug cord
from 120 volt vacuum into 220 volt
outlet.
WARNING
- To reduce the risk of fire, electric
shock, or injury:
Read and understand this manual and
all labels on the Wet/Dry Vac before
operating.
Use only as described in this manual.
Do not leave Vac running while
unattended - you may fail to notice
important signs indicating abnormal
operation such as loss of suction,
debris/liquid exiting the e
xhaust, or
abnormal motor noises
.
Immediately
stop using Vac if you notice these
signs.
!
!
!
!
!
Do not leave Vac when plugged in.
Unplug from outlet when not in use and
before servicing.
Sparks inside the motor can ignite
flammable vapors or dust. To reduce
the risk of fire or explosion, do not use
near combustible liquids, gases, or
dusts, such as gasoline or other fuels,
lighter fluid, cleaners, oil-based paints,
natural gas, coal dust, magnesium
dust, grain dust, aluminum dust, or gun
powder.
Do not vacuum anything that is burning
or smoking, such as cigarettes,
matches, or hot ashes.
Do not vacuum drywall dust, cold
fireplace ash, or other fine dusts with
standard filter. These may pass through
the filter and be exhausted back into
the air. Use a fine dust filter instead.
To reduce the risk of inhaling toxic
vapors, do not vacuum or use near
toxic or hazardous materials.
T
o reduce the risk of electric shock,
do not expose to rain or allow liquid to
enter motor compartment. Store
indoors
.
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do not use with a torn filter or without
the filter installed except when
vacuuming liquids as described in this
manual. Dry debris ingested by the
impeller may damage the motor or be
exhausted into the air.
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 34
To reduce the risk of personal injury or
damage to Vac, use only Ridgid
recommended accessories.
When using as a blower:
- Direct air discharge only at work
area.
- Do not direct air at bystanders.
- Keep children away when blowing.
- Do not use blower for any job except
blowing dirt and debris.
- Do not use as a sprayer.
- Wear safety eyewear.
To reduce the risk of eye injury, wear
safety eyewear. The operation of any
utility Vac or blower can result in
foreign objects being blown into the
eyes, which can result in severe eye
damage.
CAUTION:
To reduce the risk of hearing damage,
wear ear protectors when using for
extended time or in a noisy area.
For dusty operations, wear dust mask.
Static shocks are common when the
relative humidity of the air is low.
Vacuuming fine debris with your Vac can
deposit static charge on the hose or
Vac. To reduce the frequency of static
shocks in your home or when using this
Vac, add moisture to the air with a
humidifier.
Turn off Vac before unplugging.
To reduce the risk of injury from
accidental starting, unplug power cord
before changing or cleaning filter.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not use with damaged cord, plug or
other parts. If your Vac is not working
as it should, has missing parts, has
been dropped, damaged, left outdoors,
or dropped into water, call customer
service.
Do not pull or carry by cord, use cord
as handle, close a door on cord, or pull
cord around sharp edges or corners.
Do not run Vac over cord. Keep cord
away from heated surfaces.
Do not handle plug, switch, or the Vac
with wet hands.
Use only extension cords that are rated
for outdoor use. Extension cords in
poor condition or too small in wire size
can pose fire and shock hazards. To
reduce the risk of these hazards, be
sure the cord is in good condition and
that liquid does not contact the
connection. Do not use an extension
cord with conductors smaller than
1 mm
2
or 16 AWG in size if the length
is less than 15 m (50 ft). To reduce
power loss in 120 volt vacs, do not use
an extension cord with conductors
smaller than 2 mm
2
(14 AWG) if the
length is more than 15 m (50 ft).
This Wet/Dry Vac is double-insulated,
eliminating the need for a separate
grounding system. Use only identical
replacement parts. Read the
instructions for Servicing Double-
Insulated Wet/Dry Vacs before
servicing.
Do not put any object into ventilation
openings. Do not vacuum with any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.
Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
To reduce the risk of falls, use extra
care when cleaning on stairs.
T
o reduce the r
isk of bac
k injury or
falls, do not lift a
V
ac that is heavy with
liquid or debris
.
P
artially empty the Vac
by scooping debr
is or dr
aining liquid to
make it comfor
table to lift.
Observe the following warnings that
appear on the motor housing of your Vac:
WARNING: For your own safety,
read and understand owner’s
manual. Do not run unattended.
Do not pick up hot ashes, coals,
toxic, flammable or other hazardous
materials. Do not use around
explosive liquids or vapors.
W
ARNING: T
o reduce the risk of
electric shock - do not expose to
rain - store indoors.
DOUBLE INSULATED
GROUNDING NOT REQUIRED.
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS.
!
!
SAVE THIS MANUAL
!
35
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 35
Unpacking and Checking Carton Contents
36
Introduction
T
his Wet/Dry Vac is intended for house-
hold use. It may be used for vacuuming
wet or dry media and may be used as a
blower.
R
ead this owner’s manual to familiarize
yourself with the product features and to
understand the specific usage of your
new Vac.
Carton Contents List
Key Description Qty
A Wet/Dry Vac ................................1
B Dual-Flex™ Locking Hose ...........1
C Caster ..........................................4
D Caster Foot w/Storage .................4
E Extension Wands .........................2
F Utility Nozzle ................................1
G Wet Nozzle...................................1
H Car Nozzle ...................................1
J Owner’s Manual ...........................1
A
B
C
D
F
E
G
H
J
Remove contents of carton. Check each
item against the Carton Contents List.
Call 0800 77 10 007 or send us an e-mail
at centrodeser[email protected].
1. Turn the dust drum upside down on
the floor.
2. Insert the caster feet into the bottom of
drum, as shown (4 places).
3. Push on the caster foot until the foot is
flush with bottom of the dust dr
um.
4. Insert the caster stem into the socket
of the caster foot, as shown
(4 places).
5. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the socket and the caster will
swivel easily when positioning is
correct.
6. Turn the drum upright.
Caster/Caster Foot Assembly
Caster
Caster Stem
Caster Ball
Pin
Caster
Foot
Hole
Dust
Drum
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 36
Filter Removal and Installation
Removal and Installation
of the Qwik Lock™ Filter
Filter Removal:
1. Hold the filter tabs of the Qwik Lock™
filter in each hand.
2. With one thumb on the Qwik Lock™
stud, which protrudes through the
integrated filter plate, lift up on the filter
tabs while pushing down on the stud.
3. This action will cause the filter to
release from the filter cage. Slide filter
off cage.
Filter Installation:
1. Carefully slide the Qwik Lock™ filter
over the filter cage and press down on
the outside edge of the filter until the
rubber gasket on the bottom of the filter
seats securely around the base of the
filter cage and against the lid.
2. Align the small center hole in the top of
the filter over the Qwik Lock™ stud on
the filter cage. Press firmly on top of
the filter near the stud to allow the filter
to snap over the ball on the end of the
stud. The filter is now attached.
Filter
Cage
Qwik
Lock™
Stud
Filter
Tabs (2)
Integrated Filter
Plate with Center
Hole
P
USH
D
OWN
P
ULL
U
P
Rubber
Gasket at
Bottom of
Filter
(cutaway
view)
Lid
NOTE: Failure to properly seat the
bottom gasket could result in debris
bypassing the filter.
WARNING: Do not operate
without filter cage and float, as they
prevent liquid from entering the
impeller and damaging the motor.
!
37
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 37
38
1. Line up front of power head assembly
w
ith vacuum port located on the front
of the drum, as shown.
2. Place power head assembly on top of
drum.
3. Be sure lid completely covers the top
of the drum so leakage does not
occur.
4. Push down on top of the drum latch
areas to cause the flexible locking tabs
to hook onto the drum channel.
5. Make sure that the locking tabs are
snapped in place to prevent the lid
from coming off. (See inset).
Your new Wet/Dry Vac is ready for use.
Wet/Dry Vac Assembly
Flexible
Locking
Tab (located
under latch)
Pull
Out to
Unlatch
Flexible Locking
Tab Pulled Out
Flexible
Locking Tab
Drum
Power Head
Assembly
Push Down
to Latch
Drum
Insert Hose
Insert the push button end of the “Dual-
Flex™ Locking” hose into the inlet of the
Vac. The hose should snap into place.
To remove the hose from the Vac, press
the release button in the hose assembly
and pull the hose out of the Vac inlet,
as shown.
Vacuum Port
Release
Button
Power Head
Assembly
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 38
Operation
1. Slide extension wands and
accessories over the rings on the
caster feet.
2. To remove wands and accessories,
lightly rotate and pull upward.
To Store Your Accessories
Hose
Vac
Accessory
Caster
Foot Ring
Extension
Wand
Caster Foot
39
WARNING: To reduce the risk of fire, explosion, or damage to Vac:
Do not leave Vac running while unattended - you may fail to notice important signs
indicating abnormal operation such as loss of suction, debris/liquid exiting the
exhaust, or abnormal motor noises. Immediately stop using Vac if you notice these
signs.
Do not leave Vac plugged in when not in use.
Do not continue running when float has cut off suction.
Sparks inside the motor can ignite airborne flammables. Do not operate Vac near
flammable liquids or in areas with flammable gases, vapors, or explosive/airborne
dust. Flammable liquids, gases, and vapors include: lighter fluid, solvent-type
cleaners, oil-based paints, gasoline, alcohol, and aerosol sprays. Explosive dusts
include: coal, magnesium, aluminum, grain, and gun powder.
Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
WARNING: To reduce the risk of electric shock or injury:
Do not expose to rain or allow liquid to enter motor compartment. Store indoors.
Do not handle plug, switch, or Vac with wet hands.
Unplug Vac before servicing. If your Vac is not working as it should, has missing
parts, has been dropped, damaged, left outdoors, or dropped into water, return it to
an independent service center or call customer service.
When using an extension cord, use only outdoor-rated cords that are in good
condition. Do not allow the connection to come into contact with liquid.
!
!
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 39
40
Operation (continued)
Utility Nozzle - General purpose nozzle for
most vacuuming applications.
Car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Wet Nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
Extension Wands - These wands can be
connected together and provides
additional length for more reach.
Dual-Flex™ Locking Hose - Provides
transfer of vacuum or blowing capability
to work site. Provides the means of
attaching extension wands and nozzles.
Familiarize yourself with the accessories
included with the Vac. Each accessory may
be used in various ways for vacuuming and
blowing debris. Here is a list of the
accessories and their uses.
Vacuuming Liquids
1. When picking up small amounts of
liquid the filter may be left in place.
2. When picking up large amounts of
liquid we recommend that the filter be
removed. If the filter is not removed, it
will become saturated and misting may
appear in the exhaust.
3. When the liquid in the drum reaches a
predetermined level, the float
mechanism will rise automatically to cut
off air-flow. You will know that the float
has risen because Vac airflow ceases
and the motor noise will become higher
in pitch, due to increased motor speed.
When this happens, turn off the Vac,
unplug the power cord, and empty the
drum.
4. After using the Vac to pick up liquids,
the filter must be dried to avoid possible
milde
w and damage to the filter
.
IMPORTANT: To reduce the risk of
damage to the Vac, do not run motor
with float in raised position.
Vacuuming Dry Materials
1. The filter must always be in correct
position at all times to avoid leaks and
possible damage to Vac.
2. Your using your Vac to pick up very fine
dust, it will be necessary for you to
empty the drum and clean the filter at
more frequent intervals to maintain
peak Vac performance.
NOTE: It is necessary that a dried filter is
used to pick up dry material. If you use
your Vac to pick up dust when the filter is
wet, the filter will clog quickly and be very
difficult to clean.
=
OFF
=
ON
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l".
The symbols used on the switch actuator
are international "On & Off" symbols:
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 40
41
1. Locate blowing port of your Wet/Dry
Vac.
2. Insert locking end of hose into the
blowing port of the Vac.
3. (Optional) Attach extension wand to
swivel end of hose, then place a car
nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Swivel End
of Hose
Extension
Wand
(optional)
Blowing
Port
Dual-Flex
Locking
Hose
Car Nozzle
(optional)
WARNING: To reduce the risk of
back injury or falls, do not lift a Vac
heavy with liquid or debris. Scoop
or drain enough contents out to
make the Vac light enough to lift
comfortably.
Moving the Wet/Dry Vac
Should it become necessary to pick the
Vac up to move it, the handles on the
sides of the dust drum are used to lift. To
maneuver the Vac, the pull handle above
the inlet should be used.
Blowing Feature
Your Wet/Dry Vac features “Full Blowing”.
It can blow sawdust and other debris.
Follow the steps below to use your Vac
as a blower.
WARNING: Always wear safety
eyewear before using as a blower.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
!
!
!
!
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
Emptying the Drum
1. The Vac comes equipped with a drain
for easy emptying of liquids. Simply
unscrew the drain cap and lift the
opposite side slightly to empty the
drum.
2. Another option is to remove the lid. Pull
the flexible latches outward on each
side of the lid to release from the drum.
3. While holding the latches out, lift the
top assembly up and away from the
drum.
4. Lay top assembly upside down on a
clean area while emptying drum or
changing filter.
5. Dump the drum contents into the
proper waste disposal container.
!
!
Operation (continued)
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 41
42
1. Some removal of dry debris can be
accomplished without removing the
filter from the Vac. Slap your hand on
top of the lid while the Vac is turned
off.
2. For best cleaning results due to
accumulated dust, clean the filter in
an open area. Cleaning SHOULD be
done outdoors and not in the living
quarters.
3. After filter removal from Vac, remove
the dry debris by gently tapping filter
against the inside wall of your dust
drum. The debris will loosen and fall.
4. For thorough cleaning of dry filter with
fine dust (no debris), run water
through it as described under
"Cleaning A Wet Filter"
Cleaning A Wet Filter
After filter is removed, run water through
the filter from a hose or spigot. Take care
that water pressure from the hose is not
strong enough to damage filter.
Installation
Refer to page 37 "Filter Removal and
Installation " Section of this manual.
Allow the filter to dry before reinstalling
and storing the Vac.
Maintenance
NOTE: The filter is made of high quality
paper designed to stop very small
particles of dust. The filter can be used
for dry pick up or small amounts of liquid.
Handle the filter carefully when removing
to clean or installing it. Creases in the
filter pleats may occur from installation
but will not affect the performance of the
filter.
Filter Cleaning
Your filter should be cleaned often to
maintain peak Vac performance.
Be sure to dry the filter before storing or
picking up dry debris.
IMPORTANT: After cleaning, check the
filter for tears or small holes. Do not use a
filter with holes or tears in it. Even a small
hole can cause a lot of dust to come out
of your Vac. Replace it immediately.
Filter Removal
Refer to page 37 “Filter Removal and
Installation” Section of this manual.
Cleaning A Dry Filter
Filter
IMPORTANT: To avoid damage to the
blower wheel and motor, always reinstall
the filter before using the Vac for dry
material pick-up.
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 42
Cleaning and Disinfecting the
Wet/Dry Vac
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
To clean the drum:
1. Dump debris out.
2. Wash drum thoroughly with warm
water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
(i.e.; waste water pick up) the drum
should be disinfected.
To disinfect the drum:
1. Pour 4 Liters of water and 20 ml
chlorine bleach into the drum.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the drum.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the drum.
Cord Maintenance
When vacuuming is complete, unplug the
cord and wrap it around the motor cover.
If the power cord is damaged, it must be
replaced by the manufacturer or their
service agent or by similarly qualified
personnel to reduce the risk of accident.
Storage
Before storing your Vac, the drum should
be emptied and cleaned. The cord should
be wrapped around the unit and the hose
should be stored as described in this
manual. Accessories should be kept in
the same area as the Vac so they can be
readily available. The Vac should be
stored indoors.
Casters
If your casters are noisy, you may put a
drop of oil on the roller shaft to make
them quieter.
WARNING: To assure product
SAFETY and RELIABILITY, repairs
and adjustments should be
performed by
Authorized Service
Centers, always using RIDGID
replacement parts.
!
Maintenance (continued)
Cord Storage
Simply, wrap the power cord around the
power head and snap the connector on
the plug to a wrap of the cord.
Power
Cord
Cord
Wrap
Area
43
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 43
Key
No. Model No. Description
1 833879 Rocker Switch
2 820563-4 Screw, Pan Hd. Ty. “AB” 10 x 3/4 Ser.
3 509776-7 Motor Assembly (120 V)
3 509776-10 Motor Assembly (230 V)
4 834077-2 Power Cord Assembly
5 829692 Collector
6 823200A Float
7 823201-3 Filter Cage
8 826817 Nut, Hex Flange 5/16-18
9 315534-1 Washer
10 818413-3 Blower Wheel
11 818961 Spacer
12 820563-7 Screw, Pan Hd. Ty. “AB” 10 x 3/4 Ser.
13 VF4000 Qwik Lock™ Filter
14 73185 Drain Cap
15 828833 Caster Foot w/Storage
16
331605 Caster
17 VT2509 Utility Nozzle
18 VT2503 Car Nozzle
19
VT2510
W
et Nozzle
20 VT2508 Extension Wands
21 826356-1 Dual-Flex™ Locking Hose Assembly
22 SP6823
Owner
s Manual
WARNING
SERVICING OF DOUBLE-INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry Vac must be identical to the parts they replace.
Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbol (square within a square) may also be
marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.
Repair Parts
RIDGID 45 Liter/12 U.S. Gallon Professional Wet/Dry Vac
Catalog Numbers WD1255BR/WD1256BR include
Model Numbers WD1255BR0 (230 V) and WD1256BR0 (120 V)
Services parts are available on-line at www.ridgid.com.br/centrodeservicos/
Always order by Part Number - Not by Key Number
* Standard Hardware Item - Ma
y Be Purchased Locally
These replacement par
ts are a
v
ailab
le where y
ou purchased y
our
Vac.
*
*
!
44
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 44
RIDGID 45 Liter/12 U.S. Gallon Professional Wet/Dry Vac
Catalog Numbers WD1255BR/WD1256BR include
Model Numbers WD1255BR0 (230 V) and WD1256BR0 (120 V)
Services parts are available on-line at www.ridgid.com.br/centrodeservicos/
Always order by Part Number - Not by Key Number
Repair Parts (continued)
45
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 45
Emerson Electric do Brasil Ltda.
Rua Áries, 17 - Alpha Conde 1
06473-001 - Alphaville - Barueri - SP – Brasil
Fone: 55 11 4689-3113 - Fax: 55 11 4689-3110
SAC 0800 77 10 007
E-mail: centr[email protected]
Site: www.ridgid.com.br
Stock No. WD1255BR, WD1256BR
Model No. WD1255BR0, WD1256BR0
Serial No.
Model and Serial numbers may be found on the label near cord entry on Vac.
Y
ou should record both Model and Ser
ial numbers in a safe place for future use.
c 2012 Emerson
What is covered?
The RIDGID ® Wet/Dry Vacuum Cleaners are warranted to be free of defects in workmanship and material.
How long coverage lasts?
This limited warranty lasts for 1 year from the date of purchase of the Wet/Dry Vacuum Cleaner. It covers the
Vacuum and Motor.
How to get service?
To get the benefit from this warranty, call 0800 77 10 007 or contact us through the site at
www.ridgid.com.br/centrodeservicos. When you contact us, have the serial and model numbers handy.
When requesting warranty service, you must present the proof of purchase documentation, which includes
the date of purchase.
What will we do to correct the problem?
During the 1 Year Limited Warranty, the RIDGID ® Wet/Dry Vacuum Cleaners will be repaired or replaced at
the option of Emerson Electric do Brasil Ltda. and returned free of charge or, if after three repairs or
replacement attempts the vacuum cleaner is still defective, the owner may opt for receiving total
reimbursement of the purchase price.
What is not covered?
Defects due to abuse, incorrect use or normal wear and tear are not covered by this 1 Year Limited Warranty.
EMERSON ELECTRIC DO BRASIL LTDA. IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
No other express warranty applies.
This 1 Year Limited Warranty is the only and exclusive warranty for RIDGID® Wet/Dry Vacuum Cleaners.
No employee, agent, distributor or other person is authorized to modify this warranty or to grant any other
warranty on behalf of the Emerson Electric do Brasil Ltda.
Symbol of Quality, Durability and
Dependability
Printed in Mexico 2012
We
Build
Reputations
SP6823 WD1255 PSE-BRZ 4/17/12 1:54 PM Page 48
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

RIDGID DWV010 Owner's manual

Category
Vacuum cleaners
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI