WA616M
Color ID Rings
Online user guide for WA616M identification rings.
Version: 2.0 (2020-H)
Shure Incorporated
3/4
WA616M
Color ID Rings
Identification Rings
These multi-color rings help to identify microphones. Place the ID rings at the base of each microphone as shown.
Removing the Contact Cover
To remove the battery contact cover, partially unscrew the handle, about three turns, and then screw it back on. This pushes
the ring down enough so it may be removed with the fingers.
Shure Incorporated
4/4
-
1
-
2
-
3
-
4
