OvisLink AirLive BT-302USB User manual

Table of Contents

BT-302USB User’s Manual

B

T

-302USB

le

User’s Manual

Bluetooth 3.0 Mini USB

Dong

Copyright & Disclaimer

BT-302USB User’s Manual 2

Copyright & Disclaimer

No part of this publication may be reproduced in any form or by any means, whether electronic,

mechanical, photocopying, or recording without the written consent of OvisLink Corp.

OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide.

However, we are not liable for the inaccuracies or errors in this guide. Please use with caution. All

information is subject to change without notice

All Trademarks are properties of their respective holders.

Copyright & Disclaimer

3 BT-302USB User’s Manual

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other

antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the authority to operate equipment.

Copyright & Disclaimer

BT-302USB User’s Manual 4

Federal Communication Commission (FCC) Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE

C95.1-1999 and had been tested in accordance with the measurement methods and procedures

specified in OET Bulletin 65 Supplement C.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN

PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication

terminal Equipment and the mutual recognition of their conformity (R&TTE)

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal

Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it.

However, special attention must be paid to the dangers of electric shock and static electricity when

working with electrical equipment. All guidelines of this and of the computer manufacture must

therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,

Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,

Sweden, and the United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states: Iceland,

Liechtenstein, Norway, and Switzerland.

EU Countries Not intended for use

None.

The specification is subject to change without notice.

Table of Contents

BT-302USB User’s Manual

Table of Contents

1. Introduction ........................................................................................................1

1.1. System Requirements........................................................................... 2

1.2. Package Contents................................................................................. 2

1.3. Hardware Installation ............................................................................ 3

2. Software Installation...........................................................................................4

2.1. Configuration Utility............................................................................. 14

2.2. Bluetooth Configuration - General....................................................... 19

2.3. Bluetooth Configuration - Accessibility ................................................ 20

2.4. Bluetooth Configuration – PIM Interface ............................................. 22

2.5. Bluetooth Configuration - Share.......................................................... 24

2.6. Bluetooth Configuration – Communications Port................................. 26

2.7. Bluetooth Configuration – Networking................................................. 27

2.8. Bluetooth Configuration - Diagnostics................................................. 28

3. Specifications...................................................................................................29

4. Wireless Network Glossary .............................................................................30

1. Introduction

1 BT-302USB User’s Manual

1 1. Introduction

Thank you for purchasing the AirLive BT-302USB Bluetooth 3.0 Mini USB Dongle.

This ultra-compact USB adapter supports the latest Bluetooth 3.0 standard and lets

you connect your desktop computer or notebook computer to mobile phone, PDA,

notebooks, printers or headsets. This handy and mini adapter allows you to create

your Personal Area Network (PAN) instantly. You will soon be able to enjoy these

additional features by following the instruction in this manual.

y Extremely compact design Bluetooth 3.0 USB adapter

y Universal Bluetooth connectivity for your computer

y Effectively power saving, ultra low power consumption

y Backward compatible with Bluetooth v1.2/2.0/2.1

y Supports A2DP stereo streaming, up to 3Mbps link speed

1. Introduction

BT-302USB User’s Manual 2

1.1. System Requirements

y USB 2.0 port & CD-ROM drive

y Windows XP/Vista/7 or Mac OS X 10.5/10.6

y At least 30MB of available disk space

Note: this device may not be able to work with USB 1.1 port

1.2. Package Contents

Before installing the adapter, please check if there’s anything missing in the package,

and contact your dealer of purchase to claim for missing items:

y BT-302USB

y Software CD

1. Introduction

3 BT-302USB User’s Manual

1.3. Hardware Installation

y USB Connector

y Link/Activity LED (Blue)

LED Mode Status

Steady ON Connect to a USB port with power

Flash Transferring data

Link/

Activity

Off Adapter un-plugged

With the computer switched on, insert the BT-302USB adapter into an empty USB

2.0 port.

Caution: Never use force to insert the adapter

2. Software Installation

BT-302USB User’s Manual 4

2 2. Software Installation

BEFORE INSTALLATION

Please remove any previous version of Widcomm Bluetooth software existing in

your system. The remove procedures are as follows:

1. Click Start/Settings, and then select Control Panel

2. In the Control Panel window, double click Add/Remove programs icon

3. Find out the item Widcomm Bluetooth Software x.x.x.x then remove it

INSTALL WIDCOMM BLUETOOH SOFTWARE

Note: The following instruction were based on Windows XP, please follow the

on-screen instruction if you have different operating system.

2. Software Installation

5 BT-302USB User’s Manual

Insert the enclosed software CD in the CDROM drive and click “Install Driver &

Utility” from the autorun screen. If the autorun screen did not appear, run the

“Setup.exe” program in the “Driver” folder.

1. The system will detect and install the Microsoft Net Framework automatically.

2. Software Installation

BT-302USB User’s Manual 6

2. When the first of the Bluetooth Setup screen displays, click “Next” to continue.

On any of the screens where they appear, click “Back” to return to a previous

screen; click “Cancel” to exit the wizard.

2. Software Installation

7 BT-302USB User’s Manual

3. The Widcomm Bluetooth Software version will appear, click “Next” to continue.

2. Software Installation

BT-302USB User’s Manual 8

4. License Agreement screen appears, select “I accept the term in the license

agreement” and click “Next.”

2. Software Installation

9 BT-302USB User’s Manual

5. Click “Change” to appoint the destination of utility installation, or click “Next” to

continue with default destination.

2. Software Installation

BT-302USB User’s Manual 10

6. When the next screen displays, click “Install” to begin the installation.

2. Software Installation

11 BT-302USB User’s Manual

7. Please wait while the install procedure is running.

2. Software Installation

BT-302USB User’s Manual 12

8. When you see this message, please follow the on-screen instruction and insert

the AirLive BT-302USB into the USB port and click “OK” to continue.

9. Click “Finish” to complete the driver installation process. It is recommended to

restart your computer once the driver/utility installation is complete.

2. Software Installation

13 BT-302USB User’s Manual

10. After the installation, a Bluetooth icon appears in the desktop menu, presenting

the status of the BT-302USB adapter. To begin configuring the Bluetooth

connection, right-click on the icon and select your prefer choice from the pop-up

menu. To stop the configuration utility, right-click on the icon and click “Stop the

Bluetooth Device”

2. Software Installation

BT-302USB User’s Manual 14

2.1. Configuration Utility

The configuration utility is a powerful application that helps you configure you

Bluetooth adapter with other Bluetooth embedded devices.

The utility appears as an icon in the system tray and on the desktop of Windows.

You can open it by right-click the icon in the system tray and an options menu

displays.

Explore My Bluetooth Places: Double-click the My Bluetooth Places icon on the

desktop or right-click the Bluetooth icon in the system tray and select Explore My

Bluetooth Places. It will show the Bluetooth devices that have been paired up before.

You can easily re-connect the devices without going through the pairing process.

2. Software Installation

15 BT-302USB User’s Manual

Add a Bluetooth Device: The Bluetooth Setup Wizard appears and it will help you

with the following features:

y Configure how this computer accesses a service on another

Bluetooth device

y Locate remote Bluetooth devices

y Configure the way that this computer provides services to remote

Bluetooth devices

y Set the name and type of this Bluetooth device

Page is loading ...

OvisLink AirLive BT-302USB User manual

OvisLink AirLive BT-302USB User manual

Other documents