05-16-2017
Page 1/1
ITEM NO: I07-455-WBR/PEP/BLK Chesser
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Removable Jewelry tray
Felt-lined Top Drawers
Cedar-lined Bottom
Drawers
Leveler on Bun Feet &
Support Leg
COMPONENTS LIST:
No. Description Sketch Quantity
1 Case 1 PC
2 Bun Foot 4 PCS
3 Support Leg 1 PC
STEP 1: Put the case backside
down on a soft surface, Attach the
bun feet and support leg to the
bottom of case, Turn the case to
the upright position.
Case Bottom
Bun Foot Leveler Leveler
Support Leg
BEFORE USING THIS PRODUCT PLEASE READ,
UNDERSTAND, AND FOLLOW THESE
INSTRUCTIONS.
Save these instructions for future reference.
05-16-2017
Page 1/2
ITEM NO: I07-487-WBR/PEP/BLK TV Frame w/TV Mount (for -455)
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
Assembly instructions for the TV
mount are in the TV mount package.
Follow these instructions when
attaching TV mount and TV to the
TV frame.
COMPONENTS LIST:
No. Description Sketch Quantity
1 TV Frame 1 PC
2 Metal Strip 2 PCS
3 TV Mount 1 Set
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø1/4"*1-9/16" 8 PCS
B Lock Washer Ø1/4" 8 PCS
C Flat Washer Ø1/4" *3/4" 8 PCS
D Allen Wrench 4mm 1 PC
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
05-16-2017
Page 2/2
ITEM NO: I07-487-WBR/PEP/BLK TV Frame w/TV Mount (for -455)
FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
Metal Strip
A
B
C
Metal Strip
D
Chesser Back
Chesser Back
STEP 1: Attach the metal strips to the chesser by using 4 bolts (A), lock washers (B) and flat
washers (C). See below. Do not tighten the bolts completely.
STEP 2: Attach the metal strips to the TV frame by using 4 bolts (A), lock washers (B) and
flat washers (C). Tighten all the bolts on TV frame and Chesser with Allen wrench.
Chesser Back
A
B
C
Metal Strip D
TV Frame Back
I07-455-WBR/PEP/BLK
I07-487-WBR/PEP/BLK
/