Terra LDS103 is a low noise down converter intended for the distribution of satellite and digital terrestrial television signals for up to 32 satellite tuners or receivers. It has two subscriber outputs, one of which works in dSCR/Legacy mode, and the other one - only in dSCR. The LNB has two DC power modes for convenient DC powering options. It automatically detects SCR/dSCR mode or legacy format from the receiver.
The LNB can be configured using PC102W programmer and software, which can be free downloaded from https://www.terraelectronics.com/software. It can be configured for up to 32 User Bands (UB) per both outputs for use with STB’s supporting DiSEqC commands according to standards EN50494/EN50607 (SCR/dSCR) as well as Legacy (+13 V/+18 V/22 kHz) commands.
Terra LDS103 is a low noise down converter intended for the distribution of satellite and digital terrestrial television signals for up to 32 satellite tuners or receivers. It has two subscriber outputs, one of which works in dSCR/Legacy mode, and the other one - only in dSCR. The LNB has two DC power modes for convenient DC powering options. It automatically detects SCR/dSCR mode or legacy format from the receiver.
The LNB can be configured using PC102W programmer and software, which can be free downloaded from https://www.terraelectronics.com/software. It can be configured for up to 32 User Bands (UB) per both outputs for use with STB’s supporting DiSEqC commands according to standards EN50494/EN50607 (SCR/dSCR) as well as Legacy (+13 V/+18 V/22 kHz) commands.
Terra LDS103 is a low noise down converter intended for the distribution of satellite and digital terrestrial television signals for up to 32 satellite tuners or receivers. It has two subscriber outputs, one of which works in dSCR/Legacy mode, and the other one - only in dSCR. The LNB has two DC power modes for convenient DC powering options. It automatically detects SCR/dSCR mode or legacy format from the receiver.
The LNB can be configured using PC102W programmer and software, which can be free downloaded from https://www.terraelectronics.com/software. It can be configured for up to 32 User Bands (UB) per both outputs for use with STB’s supporting DiSEqC commands according to standards EN50494/EN50607 (SCR/dSCR) as well as Legacy (+13 V/+18 V/22 kHz) commands.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI