TrailFX JL04FD Installation guide

TrailFX
Brand
TrailFX
Model
JL04FD
Type
Installation guide

TrailFX JL04FD is a front tubular door compatible with 2018 and newer Jeep Wrangler JL models. It is made of polished stainless steel and comes with a limited lifetime warranty or powder-coated black with a 3-year warranty. The door is easy to install, with no cutting or drilling required. It comes with all the necessary hardware, including safety belts. The TrailFX JL04FD is a great way to add style and functionality to your Jeep Wrangler JL.

Here are some of the features and possible use cases of the TrailFX JL04FD:

  • Adds style and functionality to your Jeep Wrangler JL
  • Easy to install, with no cutting or drilling required

TrailFX JL04FD is a front tubular door compatible with 2018 and newer Jeep Wrangler JL models. It is made of polished stainless steel and comes with a limited lifetime warranty or powder-coated black with a 3-year warranty. The door is easy to install, with no cutting or drilling required. It comes with all the necessary hardware, including safety belts. The TrailFX JL04FD is a great way to add style and functionality to your Jeep Wrangler JL.

Here are some of the features and possible use cases of the TrailFX JL04FD:

  • Adds style and functionality to your Jeep Wrangler JL
  • Easy to install, with no cutting or drilling required
www
.
T
r
a
il
F
X
.
c
om
Page 1 of 6 Rev 031419
TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF THE
TAILGATE VENT COVER CAREFULLY.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE USE SAFETY GLASSES & ENSURE TO BLOCK VEHICLE
MOVEMENT DURING INSTALLATION PROCESS
60-180 min
support@trailfx.com
1 866 638 4870
POLISHED STAINLESS STEEL – LIMITED LIFETIME
POWDER COATED BLACK – 3 YEARS
Cutting Not
Required
FRONT TUBULAR DOOR PARTS LIST
Part Description
Qty
Part Description
Tube Door (Q235)
2
Safety Belt (B)
Hinges (Q235) (A)
1 Set
Hardware Kit (C)
FRONT TUBULAR DOOR INSTALLATION PARTS LIST IMAGES
Front Tubular Door
Part: JL04FD
Fit: 2018 - Current Jeep Wrangler JL
Drilling Not
Required
B
C
A
www
.
T
r
a
il
F
X
.
c
om
Page 2 of 6 Rev 031419
FRONT TUBULAR DOOR INSTALLATION PARTS LIST
Part Description
Qty
Part Description
M8x25 Half Round Head Socket Hexagon Bolt
8
M8 Spring Washer
M8x16x1 Flat Washer
8
M8 Nuts
INSTRUCTION PROCEDURE
1. Assemble the doors as shown below.
2. Remove the factory installed front door. Raise the front tubular door up into place and align the (2) holes on the frame with
the holes on car on the doors.
3. Close the door and debugging screws.
4. Fasten safety belt in doors
5. Install the OEM vehicle bolts
6. Installation completed.
www
.
T
r
a
il
F
X
.
c
om
Page 3 of 6 Rev 031419
A: Door Assembly
Step 1
Step 2
Assemble to doors parts and the safety belt (4xM8*25 bolts, 8xM8 flat washers, 4xM8 Spring washers, 4xM8
nuts)
Front door Installation as Illustrated below
www
.
T
r
a
il
F
X
.
c
om
Page 4 of 6 Rev 031419
Step 3
Step 4
Step 5
Fix the door and debugging screws.
Fasten safety belt in doors
Fasten safety belt in doors
Install OEM vehicle bolts
Install OEM vehicle bolts
www
.
T
r
a
il
F
X
.
c
om
Page 5 of 6 Rev 031419
Step 6
NOTE:
Mirror brackets available on TrailFX website as an optional accessory for purchase.
Brackets available for both OEM MIRRORS and aftermarket mirrors.
Recheck hardware count as per the part list.
Installation completed
Installation completed
www
.
T
r
a
il
F
X
.
c
om
Page 6 of 6 Rev 031419
PRODUCT CARE
1. Periodically check the product to ensure all fasteners are tight and components are intact.
2. Regular waxing is recommended to protect the finish of the product.
3.
Use ONLY Non-Abrasive automotive wax.
Use of any soap, polish or wax that contains an abrasive is detrimental and can scratch the finish
leading to corrosion.
4. Aluminum polish may be used to polish small scratches and scuffs for
Stainless Steel finish.
5. Mild soap may be used to clean the product for both
Stainless Steel and Black finish.
Check out these other TrailFX Products!! www.TrailFX.com
FAQ’s
1. Mounting bracket are not getting Installed properly.
In some cases Illustration images shown in Installation manual may not be the exactly same as per actual vehicle images ,also if Driver /
Passenger side mounting brackets are very identical in the design, suggest referring Parts Identification guide to avoid fitment issue.
2. Products are thumping / rattling after installation.
Please ensure that all required mounting brackets / hardware’s are installed & tighten correctly. Suggest using white lithium / regular
grease between the metal to metal contact surfaces.
3. Missing / Excess Hardware.
Recheck hardware count as per the part list.
4. Product not installing properly.
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of
purchase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness
for a particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product at our
option, when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this product
voids the warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically excludes
liability for any incidental or consequential loss or damage.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

TrailFX JL04FD Installation guide

TrailFX
Brand
TrailFX
Model
JL04FD
Type
Installation guide

TrailFX JL04FD is a front tubular door compatible with 2018 and newer Jeep Wrangler JL models. It is made of polished stainless steel and comes with a limited lifetime warranty or powder-coated black with a 3-year warranty. The door is easy to install, with no cutting or drilling required. It comes with all the necessary hardware, including safety belts. The TrailFX JL04FD is a great way to add style and functionality to your Jeep Wrangler JL.

Here are some of the features and possible use cases of the TrailFX JL04FD:

  • Adds style and functionality to your Jeep Wrangler JL
  • Easy to install, with no cutting or drilling required
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents