2. Baxton Studio
  3. Telma-Grey/Dark Brown-5PC Dining Set

Baxton Studio Telma-Grey/Dark Brown-5PC Dining Set Assembly Instructions

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the chair model 146 C. This document includes a parts list, hardware details, step-by-step diagrams to help you assemble your product. I'm ready to answer any questions you have about the assembly process.
  • What should I do before starting assembly?
    When should I fully tighten the nuts and bolts?
    What should I avoid when tightening?
3
3
STEP 4
COMPLETED ASSEMBLY
5
1
4
AC
1
5
C
C
C
2
4
B
STEP 1 STEP 2 STEP 3
ASSEMBLY INSTRUCTION
Read this instruction carefully, remove all wrapping material, staples and straps from the carton. See
hardware and furniture part list
For guidance. Be sure you have all wooden furniture parts on a clean and soft surface to prevent from
being scratched. Follow the figure to start assembling.
Caution:
1.Do not FULLY –TIGHTEN the nut or bolt until all nut or nut bolt is ready to assembled.
2.Do not OVER- TIGHTEN the nut or nut bolt to avoid causing damages to the thread.
3.Keep all hardware part out of reach of children.
NO PART LIST QTY
A BACK REST1
BFRONT LEG
C SIDE RAIL
D CUSHION SEAT
DESCRIPTION
QTY
1
NO
2
3
4
5
1
1
2
MODEL:
146
C
JCBC SCREW M6 X 50MM 6
WOOD DOWEL 4
CSK SCREW M4 x 30mm 3
SPRING WASHER 6
M4 ALLEN KEY1
COMPLETED TABLE ASSEMBLY
STEP 1
Read this instruction carefully, remove all wrapping material, staples and straps from the carton. See hardware and furniture part list.
For guidance. Be sure you have all wooden furniture parts on a clean and soft surface to prevent from being scratched. Follow the figure to
start assembling.
Caution:
1. Do not FULLY –TIGHTEN the nut or bolt until all nut or nut bolt is ready to assembled.
2. Do not OVER- TIGHTEN the nut or nut bolt to avoid causing damages to the thread.
3. Keep all hardware part out of reach of children.
PART LIST
No. DESCRIPTION QTY
Table Top
B
A
Table Leg
1
4
No. DESCRIPTION QTY
4
3
2
1
MODEL : 7048T
ASSEMBLY INSTRUCTIONS
HARDWARE LIST
JCBC Screw M6x90mm
JCBC Screw M6x50mm
JCBC Screw M6x25mm
1
5Spring Washer
CTable Support 2
D Bottom Support 1
6Adjuster
7
4
CSK Screw M4x30mm
8
4
12
13
1
Allen Key
STEP 2
STEP 3 STEP 4
STEP 5
A
B
C
1
57
6
2
7
5
C
5
3
7
*Please adjust table leg (set) to
center of the table top before tight
the CSK Screw M4x30mm
/