PUIG Engine Cover Track Homologated Mounting instructions

Hello! I've reviewed the Puig mounting instructions for the GSX 600R and GSX 750R side covers. This document provides detailed steps for installation and highlights that these covers have a wear warning device approved by the FIM for competition use. I can answer any questions you have about the mounting process or the features mentioned in the document.
What motorcycle models are these side covers compatible with?

Are these side covers suitable for use in competition?

How many people are needed to mount them?

Is it necessary to remove the cover for mounting this part?

ID. PIEZA / PART DESCRIPCIÓN DESCRIPTION QTY. REF.:

1Tapa izquierda Left cover 1CONJUNTO--20124

3 Tornillo M6x55 DIN6921 M6x55 DIN6921 screw 4 -

RECOMENDAMOS MONTAR LOS TORNILLOS APRETANDO UNIFORMEMENTE UNO TRAS OTRO, PARA APRETAR FINALMENTE CON DINAMOMÉTRICA

WE RECOMMEND TO MOUNT THE SCREWS UNIFORMLY TIGHTENING ONE AFTER THE OTHER, TO FINALLY TIGHTEN WITH DYNAMOMETRIC

SUZUKI GSX 600R / 750R ’11-’16

www.puig.tv

www.puigusa.com

[email protected]

Pg. 1/4

Created by:

www.rrdisseny.cat

REF 21515N TAPAS LATERAL IZQUIERDO / LEFT SIDE COVERS

1 Person

30 min

EASY

ATENCION: Tapas con avisador de desgaste homologadas por la Federación Internacional de Motociclismo (FIM). Aptas para uso en competición.

ATTENTION: Covers with a wear warning device approved by the International Motorcycling Federation (FIM). Suitable for use in competition.

ATTENTION: Protections Carters avec temoins d’usure Homologuees par la FIM (Federation Internationale de Motocyclisme). Conviennent pour un usage en competition.

ACHTUNG: Abdeckungen mit einer von der International Motorcycling Federation (FIM) zugelassenen Verschleißwarnvorrichtung. Geeignet für den Einsatz im Wettkampf.