nimble N5-503-H Starter Manual



*Light Sensor & Temperature Sensors are available only on some SKUs

**In case of External Probe Sensor the Internal temperature sensor will not work.

Warning: The Internal Temperature cavity should be exposed to the ambient atmosphere where temperature

is to be monitored. This cavity should not be obstructed/covered/blocked by any object. Do not insert finger

or any object into this cavity. Please keep this are free from dust, water, and other particles.

N5 Temperature Monitor Starter Guide

For N5-503-G/H and N5-553-G/H

Reset

Screw

Charging Indicator

Network Indicator

External

Temperature

Probe**

Internal

Temperature

Sensor*

Report Indicator

Power Indicator

Light Sensor



How to install Micro SIM Card

Front Cover

Back Cover

Open here

using a plastics

opener

Step 1: Carefully remove the back cover by releasing all plastic

latches

Battery

Front Side

Battery Cable

Screw

Battery

Back Side

Battery

Connector

Reset

Button

Lift the

battery here

Step 2: Lift the battery. Please do not remove the battery

from battery connector



SIM card slot

Micro SIM card

Install the SIM card as shown. The logo upwards and

the chipped edge pointing outwards the slot.

Step 3: Install the Micro SIM in the sim card slot

Step 4: After installing the SIM. Place the battery back, ensure the

battery is placed correctly and no cables are protruding outside.



Step 5: Install the back cover and press it firmly at the edges to

lock it. Install the screw (provided in the box).

Screw

Reset



How to Install the Waterproof Rubber Cover:

USB Power connector

Nimble Logo

Internal

Temperature

Sensor

LED Indicators

Sensor seal cover

External Temperature

Probe



Note: Before placing the device in the rubber cover make sure

the SIM and the Batter

y

are inserted.



Device hanger

Device back plate

Device holder

USB Power connector

External Temperature

Probe



USB Power connector

Step 1:Placethedeviceinsidetherubbercoversuchthatthe

backsideofthedevicefacesfront.InserttheUSBconnectorasshown

inthefigurethroughtherubbercover.StickthedevicewithAnabond

gluetotherubbercover.



Step 2:Fixthebacksideplateasshowninthebelow.



Device

Water proof cover

Device back side

USB Charger

External Temperature

Probe

Please contact [email protected] for support.



Step3:SealthebacksidecoverwithAnabondglue.Placethesensor

sealcoverinthefrontandshownandfixit.



Charging the device:

 Insert the micro-USB connector at one of the charging cable into the micro-USB

charging port of the device and connect the USB end of the cable to the Charger

 Connect the charger to a power socket as shown in the picture above.

 The power indicator and the charging indicator will glow ‘Red’.

 Once charging is completed (after a few hours), the charging indicator will turn off.

But, the power indicator keeps glowing as long as the device is plugged into the

power socket.

 The device comes pre-activated on the Verizon cellular network, so all you need to

do is to charge the device and it latches on to the Verizon cellular network

automatically.

Please contact [email protected] for support.

Charging the device

Nimble

Temperature

DriverSide

RoadSide

Refrigeration

unit

Temperature

Probe

Refrigerated

Trailer

Installing in Refrigerated Truck

RoadSideGrille

USBPower

DCtoDC

BatterytoDCcable

Refrigerationunit

battery

Refrigerationunit

Temperature

Probe

Road Side

Radiator

Nimble

Temperature

Monitor

Refrigeration

Unit

Road

Side

Grille

USB

Charger

• Place the device on the road side grille

• Place the front side of the device is facing the road

• Make sure the device is placed intact inside the grille

• Ensure the device is kept away from any water or dust damage

Download the Application

Nimble IRIS is available for both Android and iOS operating systems.

For Android:

 Go to the Google Play Store on your phone.

 Search for Nimble IRIS application in Play Store.

 Download and install the application from Nimble Wireless.

Web Application

Please type the url iris3.nimblewireless.com in any web browser and use your login

ID and password to monitor/configure your asset monitoring devices

Please visit the website for www.nimblewireless.com for application support

nimble N5-503-H Starter Manual

nimble N5-503-H Starter Manual

Related papers

Other documents