10
5
Environment
3
Maintenance
4
Troubleshooting
2.5 Additional functions:
- Easy ironing . Reduces creasing.
- Rinse plus . Provides extra protection for
clothes worn by children and people with
sensitive skin
- Save time . Provides extra protection for
clothes worn by children and people with
sensitive skin
• Models “a-c” -> Press once to reduce the
wash time.
• Models “b-d-e” -> Press the wash time
reduction button up to three times to reduce
the duration of the selected wash programme.
The reduced wash programme time will appear
on the display.
2.6 Delayed start . This delays the start of
washing.
2.7 Start or pause
2.8 Lock . Hold down the button(s) for 3 seconds
to activate the child lock. It is cancelled by holding
down the button(s) again for 3 seconds.
2.9 Wash process. You can check the programme
phase. The remaining time can only be viewed on
models “b-d-e”.
Recommendations for use:
- On installing your washing machine, run a
preliminary wash cycle and check it is functioning
correctly (standard wash programme, with no load
and at 90ºC).
- Use a wash bag for small items e.g. handker-
chiefs and underwear.
- You can use all type of detergents allowed to use
in washing machines. Use liquid detergents for low
temperature washing programs (maximun 40ªC)
for all fabric types. Don’t use powder detergent
with wool.
Warning:
1. If you stop the washing machine by pressing
to add more items, ensure the water level is below
the loading door level.
2. The additional functions ( and ) increase
the washing time.
3. When the wash programme ends it is
recommended to leave the loading door open to air
the inside of the washing machine. You may have
to wait 2 minutes before it can be opened. On
models “a-b-c-d” ensure the STOP pilot light is
flashing. On models “e”, wait for the symbol
to switch off.
3.1Cleaning the detergent drawer.
You should do
this once a month.
3.2 Cleaning the filter. You should do this once a
year.
For cleaning the outside of the washing
machine, use non-abrasive products and dry it
thoroughly with a soft cloth.
4.1 The washing machine includes a troubleshooting
system that detects and warns of any anomalies.
You can observe the warnings on the display, or by
flashing pilot lights on the control panel.
4.1.1 No water is entering the washing
machine. Check the water supply and the
intake tap, or clean the intake filter.
4.1.2 It is not draining or spinning. Check
the state of the filter.
4.1.3 It is not spinning. Redistribute the load
and select spin dry again.
4.1.4 It will not start up. Check the
loading door is properly closed.
4.1.5 Any other code appears. Inform
the technical assistance service.
4.2 Vibration or noise.
Check the appliance has
been correctly installed (1.1 and 1.4 of this manual).
4.3 Water remains in the drum. Check the
detergent drawer is clean (3.1).
The washing machine has been designed with
environmental protection in mind.
Display contrast. The display dims after 20
minutes to save energy. To activate the display, press
any button or turn the dial.
Protect the environment. Load the washing
machine to the maximum recommended capacity
for each programme: this will save water and power.
Avoid using the pre-wash function whenever you
can. Do not use too much detergent. Use the Rinse
plus function for garments belonging to people
with sensitive skin.
Waste electrical and electronic equipment
management. Do not dispose of these appliances
with the general domestic waste. Take your washing
machine to a special collection centre. Recycling
household appliances avoids negative consequences
for health and the environment and saves on power
and natural resources.
For further information, contact the local authorities
or the shop you bought the washing machine at.
600 800 1000 1200 1400
80 71 62 53 52
80 70 70 70 70
100 90 90 90 90
100 90 80 80 80
MAXIMUM SPIN SPEED OF THE
MACHINE (r.p.m)
*Residual dampness: the degree of dampness of the
clothes on completion of the spin dry phase
COTON programmes
SYNTHETIC programmes
WOOL programmes
QUICK programme
AVERAGE RESIDUAL
DAMPNESS* (%)
english