TFA Analogue Quartz Clock Movement with Set of Hands User manual

TFA
Brand
TFA
Model
Analogue Quartz Clock Movement with Set of Hands
Type
User manual

This manual is also suitable for

TFA Analogue Quartz Clock Movement with Set of Hands

The TFA Analogue Quartz Clock Movement with Set of Hands is a versatile and easy-to-use device that allows you to create your own custom clocks. With its simple assembly process and four different sets of hands to choose from, you can create a clock that perfectly matches your style and décor.

The clock movement is powered by a single 1.5V AA battery (not included), and it features a quartz crystal for accurate timekeeping. The metal hanger allows you to easily mount the clock on a wall or other surface, and the included rubber washer helps to protect the clock from damage.

TFA Analogue Quartz Clock Movement with Set of Hands

The TFA Analogue Quartz Clock Movement with Set of Hands is a versatile and easy-to-use device that allows you to create your own custom clocks. With its simple assembly process and four different sets of hands to choose from, you can create a clock that perfectly matches your style and décor.

The clock movement is powered by a single 1.5V AA battery (not included), and it features a quartz crystal for accurate timekeeping. The metal hanger allows you to easily mount the clock on a wall or other surface, and the included rubber washer helps to protect the clock from damage.

Page is loading ...
Instruction manual
Quartz movement and hands
Cat.-No. 60.3060.01 and 60.3061.01
9. Troubleshooting
Problems Solution
Clock's hands do not move
➜
Ensure that the battery polarity is correct
➜
Change the battery
Incorrect indication
➜
Change the battery
If your device fails to work despite these measures contact the supplier from whom you
purchased it.
9. Waste disposal
This product has been manufactured using high-grade materials and components which
can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or to
an appropriate collection site depending on national or local regulations in
order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury; Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is obli-
gated to take end-of-life devices to a designated collection point for the dis-
posal of electrical and electronic equipment, in order to ensure environmen-
tally-compatible disposal.
10. Specifications
Power consumption Battery 1 x 1.5 V AA (not included)
Use alkaline batteries
Housing dimension 56 x 29 x 56 (75) mm
Hands set 1 Second hand: 141 mm;
Minute hand: 117 mm;
Hour hand: 88 mm
Hands set 2 Second hand: 141 mm;
Minute hand: 110 mm;
Hour hand: 88 mm
Hands set 3 Second hand: 144 mm;
Minute hand: 114 mm;
Hour hand: 85 mm
Hands set 4 Second hand: 141 mm;
Minute hand: 99 mm;
Hour hand: 82 mm
Shaft length 12.5 mm
Weight 60.3060.01 – 32 g (instrument only)
60.3061.01 – 38 g (instrument only)
Suitable for dials up to 4 mm thickness (without rubber washer)
Hole diameter approx. 8.3 mm
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the
time of going to print and may change without prior notice.
The latest technical data and information about this product can be found in our homepage by simply entering the product
number in the search box.
www.tfa-dostmann.de 08/20
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure to read the instruction manual carefully.
This information will help you to familiarise yourself with your new device, to learn all of
its functions and parts, to find out important details about its first use and how to ope-
rate it, and to get advice in the event of faults.
• Following and respecting the instructions in your manual will prevent damage to your
instrument and loss of your statutory rights arising from defects due to incorrect use.
We shall not be liable for any damage occurring as a result of non-following of these
instructions.
• Please take particular note of the safety advice!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Quartz movement • Four different sets of hands
• Metal hanger • Instruction manual
3. For your safety
• This product should only be used as described within these instructions.
Caution!
Risk of injury:
• Not suitable for children under three years of age.
• Small pieces (for example screws) can be fatal if swallowed.
• Keep this instrument and the battery out of the reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swal-
lowed, this can lead to serious internal burns and death within two hours. If you suspect
a battery could have been swallowed or otherwise caught in the body, seek medical help
immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk
of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leak-
ing. Wear chemical-resistant protective gloves and safety glasses when handling leaking
batteries.
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The clock's hands are fragile and easily bendable.
4. Assembly
• Remove the nut and rubber washer from the threaded screw on the movement.
• Now install the self-made dial into the movement.
• To do this, put the metal hanger, the rubber washer and the dial on the thread and screw
everything tight with the nut.
• First put the hour hand and then the minute hand on the thread and set both to 12
o'clock.
• Finally, attach the second hand and also set it to 12 o'clock.
• Make sure that the clock's hands are not bent during assembly as this could block the
movement.
5. Getting started
• Insert a new battery 1,5 V AA and ensure that the battery polarities are correct.
• The unit is ready for use.
Setting of the clock
• Turn the setting wheel at the back and set the actual time.
• Do not turn the clock's hands directly! The mechanism of the clock could be damaged.
6. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery, if you do not use the device for a long period of time.
• Keep the device in a dry place.
7. Battery replacement
• Change the battery, when the function of the device becomes weak.
• Insert a new battery 1,5 V AA and ensure that the battery polarities are correct.
SET 1 SET 2 SET 3 SET 4
TFA_No. 60.3060_Anleitung_08_20 06.08.2020 11:42 Uhr Seite 2
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

TFA Analogue Quartz Clock Movement with Set of Hands User manual

TFA
Brand
TFA
Model
Analogue Quartz Clock Movement with Set of Hands
Type
User manual
This manual is also suitable for

TFA Analogue Quartz Clock Movement with Set of Hands

The TFA Analogue Quartz Clock Movement with Set of Hands is a versatile and easy-to-use device that allows you to create your own custom clocks. With its simple assembly process and four different sets of hands to choose from, you can create a clock that perfectly matches your style and décor.

The clock movement is powered by a single 1.5V AA battery (not included), and it features a quartz crystal for accurate timekeeping. The metal hanger allows you to easily mount the clock on a wall or other surface, and the included rubber washer helps to protect the clock from damage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents