SportsArt G572U Owner's manual

2011.12

G572U BIKE

SPORTSART G572U UPRIGHT BIKE

1. INTRODUCTION..................................................................................................

2. IMPORTANT SAFETY PRECAUTIONS...............................................................

3. LIST OF PARTS...................................................................................................

4. ASSEMBLING THE PRODUCT

STEP 1 Separate Product from Packaging........................................................

STEP 2 Install the Rear Support........................................................................

STEP 3 Install the Bottle Holder.........................................................................

STEP 4 Install the Pedestal................................................................................

STEP 5 Install the Seat Bottom and Pedals.......................................................

STEP 6 Move the Product..................................................................................

STEP 7 Level the Product..................................................................................

STEP 8 Install the Boost Converter Box ...........................................................

STEP 9 Link Boost Converter Boxes.................................................................

STEP 10 Connect Inverter...................................................................................

STEP 11 Green System Connections..................................................................

STEP 12 System Inspection................................................................................

STEP 13 Confirm Proper Installation and Cord Connections..............................

STEP 14 Seat Height Adjustment

STEP 15 Seat Height AdjustmentAdjustment

STEP 16 Integrated TV Installation......................................................................

STEP 17 How to Set the Number of Fitness Products per Pod...........................

5. UNDERSTANDING THE G572U DISPLAY CONSOLE

DISPLAY Specifications........................................................................................

DISPLAY Overview...............................................................................................

DISPLAY Windows...............................................................................................

DISPLAY Keys......................................................................................................

DISPLAY Screens.................................................................................................

6. OPERATING THE G572U EXERCISE BIKE

OPERATION Quick Start......................................................................................

OPERATION Workout Program Setup..................................................................

OPERATION Workout Program Operation...........................................................

OPERATION Switching Workouts.........................................................................

OPERATION Cool Down.......................................................................................

OPERATION Other Notes.....................................................................................

OPERATION User Preferences and Part Versions...............................................

7. ABOUT HEART RATE DETECTION AND PRESENTATION

HEART RATE Telemetry.......................................................................................

HEART RATE Contact..........................................................................................

.......................................................................

....................................................

1

2

6

8

9

10

11

12

13

14

15

17

18

19

20

21

22

23

25

27

28

29

31

33

39

48

49

50

52

TABLE OF CONTENTS

8. GUIDELINES FOR EXERCISE

HOW HARD SHOULD I EXERCISE?...................................................................

HOW LONG SHOULD I EXERCISE?...................................................................

HOW OFTEN SHOULD I EXERCISE?.................................................................

9. MAINTENANCE

MAINTENANCE Messages...................................................................................

MAINTENANCE Disconnecting the Boost Converter Box....................................

MAINTENANCE Chart..........................................................................................

MAINTENANCE Checklist....................................................................................

MAINTENANCE One-Year Maintenance Log.......................................................

10. BLOCK DIAGRAM..............................................................................................

11. GREEN SYSTEM SETUP INSPECTION CHECKLIST.......................................

12. GREEN SYSTEM CABLE CONNECTION ILLUSTRATION..............................

54

55

56

57

58

59

60

61

65

Congratulations on your purchase of one of the finest exercise products on the

market today, the SportsArt G572U upright exercise cycle. Constructed of high

quality materials and designed for years of reliable usage, this product was made to

become an integral part of your commercial fitness venue.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of this

product will help ensure that exercisers obtain their fitness goals safely and

successfully.

1

1. INTRODUCTION

2

2. IMPORTANT SAFETY PRECAUTIONS

Such parts

3

If you are a French speaking person in North America, please place the sticker

contained in the owner's manual on the product as shown. Customers in other areas

will not receive the sticker.

4

a

5

e

a

Si vous êtes une personne de langue française en Amérique du Nord, s'il vous plaît

placer l'autocollant figurant dans le manuel du propriétaire sur le produit comme indiqué.

Les clients dans d'autres pays ne recevront pas l'autocollant.

No. Name Qty

No.

QtyDescription

A1

A2

A3

A4

A5

A6

1

Assembly Parts

A7

A8

6

1

3. LIST OF PARTS

Pedestal and display

Bottle holder

Main frame and body

Pedal set

Rear support

Seat bottom

Hardware kit

Boost converter box

Boost converter connector

cable

A9

1

7

No. Name Qty

10

Parts in the Hardware Kit

4

1

Specification

Notes

Soft cap

L-shaped Allen wrench

Double open-end wrench

Screwdriver handle

Screwdriver bit

(M5)

(M6)

(12*15)

green

Flat and Phillips

No. Name

21

22

23

24

25

Parts on the Product

Specification

Notes

Inner hex screw

Serrated washer

Cushion washer

Hex nut

Flat washer

Mushroom top inner hex screw

Beveled head Phillips screw

Mushroom top inner hex screw

and washer

M8*L20

M8* L25

D18*d8.5*t2.0

D13*0.25~0.35

M8

D20*d8*t1.0

M5*P0.8*L25

M6*P1 0*L10.

ψ

STEP 1 Separate Product from Packaging

8

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual, the

words "left" and "right" are used to refer to the product and its parts. As such, these

designations correspond to the sides of a person exercising on the

product. For brevity, the word "screws" is used where screws, washers, and other

hardware may be involved.

Remove packaging as shown to leave the product on a flat piece of cardboard.

Remove bike parts. Set them aside in a safe place. Cut the corners of the box to

leave the main frame and body alone on a flat piece of cardboard.

pedals, etc., before discarding the packaging material.

"left" and "right"

(a)

(a) Remove the packaging material. Inspect all packaging material for parts, such as

STEP 2 Install the Rear Support

Please follow steps (a) through (c) to install the rear support.

(a) Remove screws (21) from the rear support.

(b) Insert the stem of the rear support (A5) into the rear tube of the main frame (A3).

Align the holes in both pieces.

(c) Install the screws (21) that had been removed from the rear support. First secure

screws in area A, then secure screws in area B.

9

(c)

(b)

(a)

10

STEP 3 Install the Bottle Holder

Please follow steps (a) through (b) below to install the bottle holder.

(a) First remove screws (24) from the pedestal (A1).

(b) Use these screws (24) to secure the bottle holder (A2) onto the pedestal.

(b)

(a)

11

STEP 4 Install the Pedestal

Please follow steps (a) through (c) to install the pedestal assembly.

(a) First remove screws (22) from the pedestal (A3).

(b) Connect the cable in the pedestal (A1) to the cable in the main frame body (A3).

(c) Tuck the cable out of the way. Insert the pedestal assembly (A1) into the mount

piece on the main body (A3). Use screws (22) to secure the pedestal assembly

(A1) into the mount piece on the main body. From the hardware kit remove the soft

caps. Insert caps (10) onto the screws.

Note: If you are installing an integrated TV module, after removing screws in step (a),

refer to step 12 in this manual. Then, after completing TV installation, carry out

all the steps in this manual.

(c)

(b)

(a)

12

STEP 5 Install the Seat Bottom and Pedals

Please follow steps (a) through (c) to install the seat bottom and the pedals.

(a) First remove screws (23) from the seat bottom (A6).

(b) Place the seat bottom (A6) onto its mount on the main frame. Then use screws

(23) to secure the seat bottom (A6) to the main frame.

(c) Note that pedals (A4) are marked either "L" for left or "R" for right. Each pedal

must be installed on the appropriate side. The stem of the right pedal screws in

clockwise. The stem of the left pedal screws in counterclockwise. Start securing

pedals by hand to ensure proper threading. Then use the wrench to fully secure

the pedals into place.

(c)

(a)

(b)

13

STEP 6 Move the Product

Lift the rear support and push, rolling the bike into place for use.

(c)

(a)

(b)

14

STEP 7 Level the Product

For proper functioning, the bike must be level. To inspect the leveling, push down on

the legs of the rear support. Does the bike sit flat on the floor, or does it rock? If

necessary, follow steps (a) through (c) to level the bike.

(a) First, loosen the leveler nuts.

(b) Adjust the leveler foot downward until it touches the floor.

(c) Secure the leveler nut against the frame of the product.

(c)(b)(a)

STEP 8 Install the Boost Converter Box

15

STEP 8 Install the Boost Converter Box (Continued)

Please follow steps (a) through (c) to install the .

(a) First, remove screws (25) from the front frame (A2).

(b)

Align the holes in (A12) with the screw holes in the

product frame (A2). Use the screws (25) removed in step (a) to secure

onto the product frame. (Note: Tighten the screws until the metal

plates contact each other securely.)

boost converter box

Connect boost converter (A8) cables to the power switch bracket connectors in

area A, B. In area A, connect cables in order , and rotate the connectors to

secure the connection. (Note: To ensure a good connection, listen for the click

sound and rotate the connector until it stops rotating.) In making the connection,

make sure that the empty (not utilized) hole faces up. In area B, directly plug in

the cable.

(c) the boost converter box

the boost

converter box

16

STEP 9 Link Boost Converter Boxes

Before making connections, make sure that power switches are in the off position on

the fitness product and the boost converter.

the boost converter box

Remove connector covers on the sides

of (A8). Insert the between-unit connection cable (A9) into

the connector on . Then use screws to secure the connection.

Only connect up to ten products per inverter. On the last unit in a line of fitness

products, leave the connector cover in place on the side with no cable connection.

17

Page is loading ...

SportsArt G572U Owner's manual

SportsArt G572U Owner's manual

Related papers

Other documents