LG 37LD650H User manual

www.lg.com

OWNER’S MANUAL

LED LCD TV/LCD TV

Please read this manual carefully before operating

your set and retain it for future reference.

ENGLISH

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI Licensing LLC.

Separate purchase

Wall Mounting Bracket

(32LD6

***

, 32LV3

***

)

LSW100B or

LSW100BG

(37/42/47LD6

***

, 37LV3

***

) (42/47LV3

***

)

LSW200B or

LSW200BG

LSW400B or

LSW400BG

I

CONTENTS

PREPARATION

LCD TV Models : 32/37/42/47LD6

***..............A-1

LED LCD TV Models : 32/37/42/47LV3

*** .... A-13

EXTERNAL EQUIPMENT SETUP

Antenna Connection ............................................1

Connecting with a Component cable ..................2

Connecting with an HDMI cable .........................3

Connecting with an HDMI to DVI cable ..............4

Connecting with a Euro Scart cable ...................5

Usb setup ............................................................6

Connecting with AN RF Cable ............................6

Connecting with a D-sub 15 pin cable ................7

Speaker output Setup .........................................7

Insertion of A CI Module ......................................8

Headphone Setup ...............................................8

Digital audio out Setup ........................................9

Supported Display Resolution ...........................10

Screen Setup for PC mode ...............................12

Network setup ...................................................16

WATCHING TV / PROGRAMME CONTROL

Turning on the TV .............................................17

Initializing Setup ...............................................17

Programme Selection ........................................17

Volume Adjustment ...........................................17

Quick Menu .......................................................18

On Screen Menus Selection and adjustment ...19

Auto programme tuning ...................................21

Manual programme Tuning ...............................22

Programme Edit ...............................................26

Booster ..............................................................28

CI [Common Interface] Information ...................29

Selecting the Programme List ...........................30

Input List ............................................................31

Input Label ........................................................32

Data Service ......................................................33

SIMPLINK ..........................................................34

AV Mode ............................................................38

Initializing(Reset to original factory settings) ....39

TO USE A USB DEVICE

When connecting a USB device .......................40

Movie list ...........................................................42

Photo list ............................................................53

Music list ............................................................63

Extra Contents ..................................................72

DivX Registration Code .....................................73

Deactivation .......................................................74

EPG(ELECTRONIC PROGRAMME

GUIDE)(IN DIGITAL MODE)

Switch on/off EPG .............................................76

Select a programme ..........................................76

Button Function in NOW/NEXT Guide Mode ...76

Button Function in 8 Day Guide Mode .............77

Button Function in Date Change Mode ............78

Button Function in Extended Description Box ..78

PICTURE CONTROL

Picture Size (Aspect Ratio) Control ..................79

Picture Wizard ...................................................81

Energy Saving ...................................................82

Preset Picture Settings .....................................83

Manual Picture Adjustment ...............................84

Picture Improvement Technology ......................86

Expert Picture Control .......................................87

Picture Reset .....................................................90

Trumotion ..........................................................91

Demo Mode .......................................................92

Power Indicator .................................................93

II

CONTENTS

SOUND & LANGUAGE CONTROL

Auto Volume Leveler .........................................94

Clear Voice II .....................................................95

Preset Sound Settings-Sound Mode ................96

Sound Setting Adjustment -User Mode ............97

Infinite Sound ....................................................97

Balance .............................................................98

DTV Audio Setting (in digital mode only) ..........99

Selecting Digital Audio out ..............................100

Audio Reset .....................................................101

Audio Description (In digital mode only) .........102

I/II

Stereo/Dual Reception (In Analogue Mode Only) ..103

NICAM Reception (In Analogue Mode Only) ..104

Speaker Sound Output Selection ...................104

On-Screen Menu Language / Country Selection .. 105

Language Selection ........................................106

TIME SETTING

Clock Setup .....................................................108

Auto on/off time setting ...................................109

Sleep Timer setting .........................................110

Alarm setting ................................................... 111

Automatic Standby ..........................................112

PARENTAL CONTROL / RATINGS

Set Password & Lock System.........................113

Block Programme ............................................114

Parental Control (In Digital Mode only) ...........115

External Input Blocking ...................................116

Key Lock..........................................................117

TELETEXT

Switch on/off ...................................................118

SIMPLE Text....................................................118

TOP Text..........................................................119

FASTEXT ........................................................119

Special Teletext Functions ..............................120

DIGITAL TELETEXT

Teletext within Digital Service .........................121

Teletext in Digital Service ................................121

APPENDIX

Troubleshooting ...............................................122

Maintenance ....................................................124

Product Specifications ...................................125

IR Codes .........................................................129

External Control Device Setup ........................130

Open source software notice ..........................137

A-1

PREPARATION

LCD TV MODELS : 32/37/42/47LD6

***

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please

contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.

Owner’s Manual Batteries

(AAA)

Remote Control

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains

or fingerprints on the

surface of the TV with

the polishing cloth.

Do not use excessive

force. This may cause

scratching or discoloura-

tion.

AV MODE INPUT

ENERGY

SAVING

EXIT

OK

BACK

PORTAL

Q.MENU

1

.,;@

2

abc

3

def

4

ghi

5

jkl

6

mno

7

pqrs

8

tuv

0

[

9

wxyz

LIST

Q.VIEW

GUIDE

AD

ALARM

INFO

MARK

RATIO

MUTE

DELETE

CHAR/NUM

P

TV/

RAD

P

A

G

E

MENU

Ferrite Core

(

This item is not included

for all models.

)

Install the power plug closely.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Power Cord

Protection cover

Bolts for stand assembly

(M4x20)

x 8

Protective Bracket and

Bolt for Power Cord

(This feature is not

available for all models.)

1-screw for stand fixing

Cable HolderPlug in type Holder

PREPARATION

Only 32/37/42LD6

***

A-2

PREPARATION

FRONT PANEL CONTROLS

■ Image shown may differ from your TV.

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of

brightness of the picture is reduced, and this will reduce the overall running cost.

CAUTION

► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-

ments of glass, or the TV may fall.

► Do not drag the TV. The floor or the product may be damaged.

SPEAKER

Power/Standby Indicator

(Can be adjusted using the Power

Indicator in the OPTION menu.)

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

A-3

PREPARATION

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

14

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

8

11

7

1

9 10

ANTENNA IN

12

BACK PANEL INFORMATION

32/37/42LD6

***

■ Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.125 to 128) Never attempt to operate

the TV on DC power.

Antenna Input

Connect antenna or cable to this jack.

LAN

Network connection.

Also used for video, photo and music files on

a local network.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

Component Input

Connect a component video/audio device to

these jacks.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

SPEAKER OUTPUT(STEREO)

The phone socket for external speaker is on

this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

1

2

3

4

5

6

8

9

10

11

12

13

14

7

2

43

5

6

13

A-4

PREPARATION

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

15

CABLE MANAGEMENT

AC IN

1

2

HDMI/DVI IN

(RGB)

LAN

AUX LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

ANTENNA

IN

8

11

7

1

9 10

13

47LD6

***

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.125 to 128) Never attempt to operate

the TV on DC power.

LAN

Network connection.

Also used for video, photo and music files on

a local network.

AUX LAN

Network connection.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

Component Input

Connect a component video/audio device to

these jacks.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

SPEAKER OUTPUT(STEREO)

The phone socket for external speaker is on

this jack.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

1

2

3

4

5

6

8

9

10

11

12

13

14

15

7

12

4

3

5

6

14

2

A-5

PREPARATION

STAND INSTALLATION

Fix the 4 bolts securely using the holes in

the back of the TV.

■ Image shown may differ from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened.

(If not tightened fully, the product can tilt forward after the product installation.)

If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening

part of the bolt.

4

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

Assemble the TV as shown.

1

3

Assemble the parts of the Stand Body with

the Stand Base of the TV.

2

Stand Body

Stand Base

Tighten the stand with the

four screws (provided as

parts of the TV).

x 4

M4 X 20

A-6

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

■ Image shown may differ from your TV.

1

Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Secure the power cable with the Protective

Bracket/Bolt or the Plug in type Holder. It

will help prevent the power cable from being

removed by accident.

AC IN

Protective Bracket/Bolt

( This feature is not available

for all models.)

Plug in type Holder

AC IN

or

AC IN

Install the Cable Management Clip as shown.

If your TV has the Cable Holder, install it as

shown and bundle the cables.

Cable Management Clip

AC IN

Cable Holder

2

Put the cables inside the Cable

Management Clip and snap it closed.

3

AC IN

►Do not hold the Cable Management Clip when moving the TV.

- If the TV is dropped, you may be injured or the product may be broken.

►With some TVs, the Plug in type Holder and the Cable Holder are included. If these holders

are inserted into the hole provided on back of the TV, they cannot be removed.

NOTE

32/37/42LD6

***

1

Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Secure the power cable with the Protective

Bracket/Bolt. It will help prevent the power

cable from being removed by accident.

AC IN

Protective Bracket/Bolt

( This feature is not available

for all models.)

AC IN

Put the cables inside the Cable

Management Clip and snap it closed.

2

AC IN

47LD6

***

A-7

PREPARATION

SWIVEL STAND

■ Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20

degrees to suit your viewing position.

ATTACHING THE TV TO A

DESK

■ Image shown may differ from your TV.

The TV must be attached to desk so it cannot be

pulled in a forward/backward direction, potentially

causing injury or damaging the product.

NOT USING THE

DESK-TYPE STAND

■ Image shown may differ from your TV.

When installing the wall-mounted unit, use the

protection cover.

Insert the Protection Cover into the TV until

clicking sound.

Protection Cover

►Screws: M5 x L (*L: Table depth + 8-10 mm)

ex) Table depth: 15mm, Screw: M5 x 25

Desk

Stand

WARNING

►To prevent TV from falling over, the TV

should be securely attached to the floor/wall

per installation instructions. Tipping, shaking,

or rocking the machine may cause injury.

1-Screw ( provided as parts of the product)

4-Screws

(not provided as parts of the product)

Desk

Stand

(Only 32/37/42/47LD6

***

)

(Only 32/37/42LD6

***

)

A-8

PREPARATION

■ This feature is not available for all models.

■ Image shown may differ from your TV.

KENSINGTON SECURITY

SYSTEM

CAREFUL INSTALLATION

ADVICE

■ You should purchase necessary components

to fix the TV safety and secure to the wall on

the market.

■ Position the TV close to the wall to avoid the

possibility of it falling when pushed.

■ The instructions shown below are a safer way

to set up the TV, by fixing it to the wall, avoid-

ing the possibility of it falling forwards if pulled.

This will prevent the TV from falling forward

and causing injury. This will also prevent the

TV from damage. Ensure that children do not

climb or hang from the TV.

3

Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and

tighten them securely in the upper holes.

Secure the wall brackets with the bolts on the

wall. Match the height of the bracket that is

mounted on the wall.

Use a sturdy rope to tie the product for align-

ment. It is safer to tie the rope so it becomes

horizontal between the wall and the product.

2

1

The TV is equipped with a Kensington Security

System connector on the back panel. Connect

the Kensington Security System cable as shown

below.

For the detailed installation and use of the

Kensington Security System, refer to the user’s

guide provided with the Kensington Security

System.

For further information, contact http://www.kens-

ington.com, the internet homepage of the

Kensington

company. Kensington sells security systems for

expensive electronic equipment such as note-

book PCs and LCD projectors.

1

2

3

NOTE

► When moving the TV undo the cords first.

► Use a platform or cabinet strong and large

enough to support the size and weight of the TV.

► To use the TV safely make sure that the height of

the bracket on the wall and on the TV is the

same.

NOTE

► The Kensington Security System is an optional

accessory.

► If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.

This is normal

, there is nothing wrong with TV.

► Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue

spots. However, they have no adverse effect on

the monitor's performance.

► Avoid touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary distortio

n

effects on the screen.

A-9

PREPARATION

■ The TV can be installed in various ways such as

on a wall, or on a desktop etc.

■ The TV is designed to be mounted horizontally.

Power

Supply

Circuit

breaker

EARTHING

Ensure that you connect the earth wire to prevent

possible electric shock. If grounding methods are

not possible, have a qualified electrician install a

separate circuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

WALL MOUNT: HORIZONTAL

INSTALLATION

■ We recommend the use of a LG Brand wall

mounting bracket when mounting the TV to a wall.

■ We recommend that you purchase a wall mount-

ing bracket which supports VESA standard.

■ LG recommends that wall mounting be per-

formed by a qualified professional installer.

DESKTOP PEDESTAL

INSTALLATION

10 cm

NOTE

►Should Install wall mount on a solid wall

perpendicular to the floor.

►Should use a special wall mount, if you

want to install it to ceiling or slanted wall.

►The surface that wall mount is to be

mounted on should be of sufficient

strength to support the weight of TV set;

e.g. concrete, natural rock, brick and hol-

low block.

►Installing screw type and length depends

on the wall mount used. Further informa-

tion, refer to the instructions included with

the mount.

►LG is not liable for any accidents or dam-

age to property or TV due to incorrect

installation:

- Where a non-compliant VESA wall

mount is used.

- Incorrect fastening of screws to surface

which may cause TV to fall and cause

personal injury.

- Not following the recommended

Installation method.

10 cm

For adequate ventilation allow a clearance of 10

cm all around the TV.

10 cm

■ Image shown may differ from your TV.

Model

VESA

(A

*

B)

Standard

Screw

Quantity

32LD6

***

200

*

100 M4 4

37/42/47LD6

***

200

*

200 M6 4

A-10

PREPARATION

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

AV MODE INPUTENERGY

SAVING

EXIT

OK

BACK

PORTAL

Q.MENU

1.,;@ 2 abc 3 def

4 ghi 5 jkl 6

mno

7

pqrs

8 tuv

0

[

9

wxyz

LIST

Q.VIEW

GUIDE

AD

ALARM

INFO

MARK

RATIO

MUTE

DELETE

CHAR/NUM

P

TV/

RAD

P

A

G

E

MENU

(POWER)

ENERGY

SAVING

AV MODE

INPUT

TV/RAD

Switches the TV on from standby or off to standby.

Adjust the Energy Saving mode of the TV.(► p.82)

It helps you select and set images and sounds

when connecting AV devices.(► p.38)

External input mode rotate in regular sequence.

(

►

p.31)

Selects Radio, TV and DTV programme.

Shows programme guide.

(

►

p.75)

Displays and removes the hotel interactive menu.

Shows the present screen information.

Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

Accepts your selection or displays the current

mode.

Selects a menu.

Clears all on-screen displays and returns to TV

viewing from any menu.

(

►

p.19)

Allows the user to move return one step in an inter-

active application, EPG or other user interaction

function.

Clears all on-screen displays and returns to TV

viewing from any menu.

GUIDE

PORTAL

INFO i

THUMBSTICK

(Up/Down/Left/Right)

OK

MENU

BACK

EXIT

Q. MENU

AD

ALARM

Select the desired quick menu source. (Aspect

Ratio, Clear Voice II , Picture Mode, Sound Mode,

Audio (or

Audio Language)

, Sleep Timer, Skip Off/

On, USB Device).

(

►

p.18)

Switches the Audio Description On or Off.

Sets the alarm function.

A-11

PREPARATION

AV MODE INPUTENERGY

SAVING

EXIT

OK

BACK

PORTAL

Q.MENU

1.,;@ 2 abc 3 def

4 ghi 5 jkl 6

mno

7

pqrs

8 tuv

0

[

9

wxyz

LIST

Q.VIEW

GUIDE

AD

ALARM

INFO

MARK

RATIO

MUTE

DELETE

CHAR/NUM

P

TV/

RAD

P

A

G

E

MENU

1

TELETEXT

BUTTONS

SUBTITLE

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

(►

p.118)

Recalls your preferred subtitle in digital mode.

1

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(►

p.34)

Coloured

buttons

These buttons are used for teletext (on TELETEXT

models only), Programme edit.

0 to 9 number

button

(Space)

LIST

Q.VIEW

Selects a programme.

Selects numbered items in a menu.

Opens an empty space on the screen keyboard.

Displays the programme table.

(

►

p.30)

Returns to the previously viewed programme.

]

A-12

PREPARATION

AV MODE INPUTENERGY

SAVING

EXIT

OK

BACK

PORTAL

Q.MENU

1.,;@ 2 abc 3 def

4 ghi 5 jkl 6

mno

7

pqrs

8 tuv

0

[

9

wxyz

LIST

Q.VIEW

GUIDE

AD

ALARM

INFO

MARK

RATIO

MUTE

DELETE

CHAR/NUM

P

TV/

RAD

P

A

G

E

MENU

Installing Batteries

■ Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -).

■ Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones.

■ Close cover.

■ To remove the batteries, perform the installation actions in

reverse.

SIMPLINK /

MY MEDIA

Menu

control buttons

Controls SIMPLINK or MY MEDIA menu (Photo List,

Music List and Movie List).

VOLUME UP

/DOWN

CHAR/NUM

MARK

RATIO

DELETE

MUTE

Programme

UP/DOWN

PAGE UP/

DOWN

Adjusts the volume.

Shifts the Character or Number.

Select the input to apply the Picture Wizard

settings.

Check and un-check programmes in the USB

menu.

Selects your desired Aspect Ratio of picture.

(► p.79)

Deletes the entered character when entering the

character on the screen keyboard.

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the

next one.

A-13

PREPARATION

LED LCD TV MODELS : 32/37/42/47LV3

***

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please

contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.

Owner’s Manual

Batteries

(AAA)

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains

or fingerprints on the

surface of the TV with

the polishing cloth.

Do not use excessive

force. This may cause

scratching or discoloura-

tion.

Remote Control

AV MODE INPUT

ENERGY

SAVING

EXIT

OK

BACK

PORTAL

Q.MENU

1

.,;@

2

abc

3

def

4

ghi

5

jkl

6

mno

7

pqrs

8

tuv

0

[

9

wxyz

LIST

Q.VIEW

GUIDE

AD

ALARM

INFO

MARK

RATIO

MUTE

DELETE

CHAR/NUM

P

TV/

RAD

P

A

G

E

MENU

Ferrite Core

(

This item is not included

for all models.

)

Install the power plug closely.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Bolts for stand assembly

(M4x12)

Only 32/37LV3

***

x 8

1-screw for stand fixing

A-14

PREPARATION

FRONT PANEL CONTROLS

■ Image shown may differ from your TV.

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of

brightness of the picture is reduced, and this will reduce the overall running cost.

CAUTION

► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-

ments of glass, or the TV may fall.

► Do not drag the TV. The floor or the product may be damaged.

HOME

SPEAKER

PROGRAMME

VOLUME

OK

HOME

INPUT

POWER

Touch buttons

1

1. Touch Button - You can use the desired button function by touching.

Touch button Description

Scrolls through the saved programmes

Adjusts the volume level

Selects the highlighted menu option or confirms an input

HOME

Accesses the main menus, or saves your input and exits the menus

Changes the input source

Turns the power on or off

Power/Standby Indicator

(Can be adjusted using the Power

Indicator in the OPTION menu.)

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

A-15

PREPARATION

BACK PANEL INFORMATION

■ Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.125 to 128) Never attempt to operate

the TV on DC power.

LAN

Network connection.

Also used for video, photo and music files on

a local network.

AUX LAN

Network connection.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

Component Input

Connect a component video/audio device to

these jacks.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

SPEAKER OUTPUT(STEREO)

The phone socket for external speaker is on

this jack.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

1

2

3

4

5

6

8

9

10

11

12

13

14

15

7

1

2

HDMI/DVI IN

(RGB)

LAN

AUX LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

ANTENNA

IN

1

2

HDMI/DVI IN

(RGB)

LAN

AUX LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

ANTENNA

IN

15

1

2

HDMI/DVI IN

(RGB)

LAN

AUX LAN

USB IN

H/P

SPEAKER

OUT

VOLUME CONTROL

STEREO (8 )

ANTENNA

IN

8

11

7

1

9 10

13

12

4

3

5

6

14

2

A-16

PREPARATION

STAND INSTALLATION

■ Image shown may differ from your TV.

When assembling the desk type stand, check

whether the bolt is fully tightened.

(If not tightened fully, the product can tilt forward

after the product installation.)

If you tighten the bolt with excessive force, the

bolt can deviate from abrasion of the tightening

part of the bolt.

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

1

3

Assemble the parts of the Stand Body

with the Stand Base of the TV.

2

Stand Body

Stand Base

M4 X 12

BACK COVER FOR WIRE

ARRANGEMENT

■ Image shown may differ from your TV.

1

Gather and bind the cables with the Cable

Holder on the TV back cover.

Cable Holder

SWIVEL STAND

■ Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20

degrees to suit your viewing position.

Assemble the TV as shown.

4

Secure the TV and the stand with the 4

screws.

Page is loading ...

LG 37LD650H User manual

This manual is also suitable for

LG 37LD650H User manual

Related papers

Other documents