ZERO-TURN MOWERS
355Z
5900748 355ZB2654, 26HP
5900755 355ZB2654FC, 26HP
5101461
Revision IR
Rev.Date 2/2008
TP100-7370-1R-HZ-N
Thankyou for purchasingthis quality-built Snapperproduct. Weare pleasedthat you've placedyour confidencein the Snapper
brand.When operatedand maintained accordingto the instructions in this manual,your Snapper mower will provide many
years of dependableservice.
Thismanualcontainssafety information to makeyou awareof the hazardsand risksassociatedwith mowers and how to avoid
them. BecauseSnapper doesnot necessarilyknow all the applicationsthis mower could be usedfor, it is important that you
readand understandthese instructions. Keepthis manualnearthe mower for convenientreference.
Thismowerrequiresfinal assemblybeforeuse. Referto the Assemblysection ofthis manualfor instructions on final
assembly procedures. Followthe instructions completely.
Whereto FindUs
ContactSnapper Customer Serviceat 1400417-7833, or on the Internet atwww.snapper.com.
Mower
Model Number
SerialNumber
Engine
Model
Type
Code
DatePurchased
It is very important that you register your purchasewith Snapperto ensure warrantycoverage. Pleasemailyour product
registrationcard to:
Snapperat P.O.Box 1379, McDonough, Georgia30253.
Oryou may register online atwww.snapper.com.
BRIGGB&BTRATTON YARD POWER PRODUCTS GROUP
MILWAUKEE, Wl 53201 USA
@2008 Briggs & Stratton Power Products Group, LLC
TableofContents
OperatorSafety.................................. 2
Important Operator SafetyInstructions ............................. 2
SafetyDecals................................................. 8
Assembly......................................
Parts Bag- Contents ...........................................
Installing the Ground Speed/ Steering Control Levers .................
Seatand SafetySwitch Assembly .................................
Chargingthe Battery ...........................................
How to Preparethe Engine.......................................
CheckTire Pressures...........................................
FeaturesandControls..............................
Operation......................................
ChecksBeforeStarting..........................................
Starting the Engine.............................................
Stopping the Riderand Engine....................................
Pushingthe Riderby Hand ......................................
Zero-Turn Driving Practice.......................................
Mower Removaland Installation ..................................
Mowing .....................................................
11
11
12
13
14
15
15
16
18
18
19
19
19
2O
22
23
Maintenance .................................... 26
MaintenanceSchedule.......................................... 26
Lubrication................................................... 27
Servicing the Mower Blades...................................... 28
Engine Maintenance............................................ 30
TransmissionMaintenance ...................................... 32
Battery Maintenance ........................................... 33
Storage ..................................................... 33
Adjustments.................................................. 34
Troubleshooting .................................. 40
Specifications ................................... 43
Slope Guide .................................... 44
Warranties ..................................... 45
GeneralWarranty.............................................. 45
WARNING
Batteryposts, terminals and relatedaccessoriescontain
leadand leadcompounds, chemicals known to the State of
Californiato causecancer and birth defectsor other
reproductive harm. Wash hands after handling.
WARNING
Engineexhaust, some of its constituents, and certain
vehiclecomponents contain or emit chemicals known to the
State of Californiato cause cancer or other reproductive
harm.
¢'D
3
o
m
0
f_
¢"D
o
1
ImportantOperatorSafetyInstructions
Safety
OperatingSafety
Congratulations on purchasing a superior-quality pieceof lawn and
garden equipment. Our products are designedand manufacturedto meet
or exceedall industry standardsfor safety.
Do not operatethis machine unlessyou havebeentrained. Readingand
understanding this operator's manualis awayto train yourself.
Power equipment is only assafe asthe operator. If it is misused, or not
properly maintained,it can be dangerous! Remember,you are
responsible for your safety andthat of those around you.
Usecommon sense,andthink through what you are doing. If you are not
surethat thetask you are about to perform canbe safelydone with the
equipment you havechosen,ask a professional: contact your local
authorized dealer.
ReadtheManual
Theoperator's manualcontains important safety information
you needto beawareof BEFOREyou operateyour unit aswell
as DURINGoperation.
Safeoperatingtechniques, an explanation ofthe product's
featuresand controls, and maintenanceinformation is
includedto help you getthe most out ofyour equipment
investment.
Besure to completely readthe Safety Rulesand information
found on the following pages. Alsocompletely readthe
Operationsection.
Children
Tragicaccidents can occur with children. Donot
allow them anywherenearthe area of operation.
Childrenare often attractedto the unit and mowing
activity. Neverassumethat children will remain
whereyou last saw them. If there is a risk that
children may enterthe areawhereyou are mowing,
haveanother responsible adult watchthem.
2 www.snapper.com
A
ImportantOperatorSafetyInstructions(Continued)
SlopeOperation
A
20
Operationon slopes can be dangerous. Using the unit on a slopethat is too
steep whereyou do not haveadequatewheeltraction (and control) can
causesliding, loss of steering, control, and possible rollover. You should
not operateon a slopegreaterthan a 5.4 foot riseover a 20 foot length (15
degrees).
Always mow across slopes, not up and down (to maintaintraction on the
wheels) and avoid suddenturns or rapid speedchanges.Reducespeedand
useextremecaution on ALL slopes.
Also, notethat the surface condition you are on cangreatly impactyour
ability to safely operatethis machine.Operatingon wet or slippery slopes
can causesliding and loss of steering and control. Donot operateon
slopes that areslippery, wet, or havesoft soil conditions.
If you feel unsureabout operatingthe unit on a slope, don't do it. It's not
worth the risk.
ThrownObjects
This unit hasspinning mower blades. Thesebladescanpick up and throw
debristhat could seriously injure a bystander. Besure to clean upthe areato
be mowed and removeobjectsthat could bethrown bythe blade BEFOREyou
start mowing.
Do not operatethis unit without the entiregrass catcher or dischargeguard
(deflector) in place.
Also, do not allow anyonein the areawhile the unit is running! if someone
doesenterthe area,shut the unit off immediately until they leave.
Moving Parts
This equipment hasmany moving parts that caninjure you or
someoneelse. However,if you stayin the operatorzone (stay
seatedin the seat), and follow the safety rules in this operator's
manual,the unit is safeto operate.
Themower deck hasspinning mower bladesthat can amputate
handsand feet. Donot allow anyonenearthe unit while it is
running! Keepsafetydevices(guards,shields,andswitches) in
placeand working.
Tohelpyou, the operator, usethis equipment safely, it is
equippedwith an operator-presentsafetysystem. Do NOT
attempt to alter or bypassthe system. Seeyour dealer
immediately if the system does not pass all thesafety interlock
systemtests found in this manual.
,_ ImportantOperatorSafety Instructions(Continued) ,_
o_
r#3
RetainingWalls, Drop-offs,and Water
Retaining walls and drop-offs around steps and water are a common hazard.Giveyourself a minimum of two mower widths of
clearancearoundthese hazardsand hand-trim with a walk behind mower or string trimmer. Wheels dropping over retaining
walls, edges,ditches, embankments, or into water can cause rollovers,which may result in serious injury, death, or drowning.
FuelandMaintenance
Alwaysdisengageall drives, shutoff the engine,and removethe
key beforedoing anycleaning, refueling, or servicing.
Gasolineand its vapors are extremely flammable. Do not smoke
while operating or refueling. Do not addfuel while engineis hot
or running. Allow engine to cool for at least 3 minutesprior to
adding fuel.
Do not add fuel indoors, in an enclosedtrailer, garage,or any
other enclosedareathat is not well ventilated. Gasolinespills
should be cleanedup promptly and before operationbegins.
Gasolineshould be stored only in sealedcontainers approvedfor
fuel.
Proper maintenanceis critical to the safety and performance of
your unit. Keepthe unit freeof grass,leaves,and excess oil. Be
sureto perform the maintenanceprocedures listed in this
manual, especiallyperiodically testing the safety system.
EnclosedAreas
Onlyoperatethis unit outdoors and away from unventilated
areassuch asinside garagesor enclosedtrailers. Theengine
emits poisonous carbon monoxidegas and prolonged
exposurein an enclosedareacan result in serious injury or
death.
4 www.snapper.com
ImportantOperatorSafety Instructions(Continued)
Readthese safety rulesand follow them closely. Failureto obeythese rulescould result in loss of control of unit,
severepersonal injury or deathto you, or bystanders,or damageto property or equipment.
Thismowinqdeckis capableof amputatinqhandsandfeet andthrowinqobjects. Thetriangle _ in text signifies
important cautions or warnings which must befollowed.
GENERALOPERATION
1. Read,understand,and follow all instructions in the
manualand on the unit beforestarting.
2. Donot put handsor feet near rotating parts or under the
machine. Keepclear of the dischargeopening at all
times.
3. Onlyallow responsible adults,who arefamiliar with the
instructions, to operatethe unit (local regulations can
restrict operatorage).
4. Clearthearea of objects such as rocks, toys, wire, etc.,
which could be picked up andthrown by the blade(s).
5. Besurethe area is clearof other peoplebefore mowing.
Stopthe unit if anyoneentersthe area.
6. Nevercarry passengers.
7. Donot mow in reverse unlessabsolutely necessary.
Always look down and behind before and whiletravelling
in reverse.
8. Neverdirect discharge materialtoward anyone. Avoid
discharging material against a wall or obstruction.
Materia/may ricochetback toward the operator. Stopthe
blade(s)when crossing gravelsurfaces.
9. Donot operatethe machine without the entire grass
catcher, dischargeguard (deflector), or othersafety
devicesin placeand operational.
10. Slow down beforeturning.
11. Neverleavea running unit unattended.Always disengage
the blades (PTO),set parking brake,stop engine,and
remove keysbeforedismounting.
12. Disengageblades(PTO)when not mowing. Shut off
engine and wait for all parts to come to a completestop
beforecleaningthe machine, removing the grass catcher,
or uncloggingthe discharge guard.
13. Operatethe machineonly in daylight or good artificial
light.
14. Donot operatethe unit while underthe influence of
alcohol or drugs.
15 Watch for traffic whenoperating near or crossing
roadways.
16. Useextra carewhen loading or unloading the unit into a
trailer or truck.
17. Always weareyeprotection when operatingthis unit.
18. Dataindicatesthat operators,age 60 years and above,
are involved in a large percentageof power equipment-
relatedinjuries. Theseoperators should evaluatetheir
ability to operatethe equipment safelyenough to protect
themselvesand others from injury.
19. Followthe manufacturer'srecommendationsfor wheel
weights or counterweights.
20. Keepin mind the operatoris responsiblefor accidents
occurring to other people or property.
21. All drivers should seekand obtain professionaland
practicalinstruction.
22. Always wearsubstantial footwear and trousers. Never
operatewhen barefoot or wearingsandals.
23. Beforeusing, alwaysvisually checkthat the bladesand
bladehardwareare present,intact, and secure. Replace
worn or damagedparts.
24. Disengageattachments before: refueling, removing an
attachment, makingadjustments (unlessthe adjustment
can be madefrom the operator's position).
25. Whenthe machineis parked,stored, or left unattended,
lowerthe cutting meansunlessa positive mechanical
lock is used.
26. Beforeleavingthe operator's positionfor any reason,
engagethe parking brake(if equipped),disengagethe
blades(PTO),stop the engine,andremove the key.
27. To reducefire hazard,keepthe unit freeof grass,leaves,
& excess oil. Do not stop or park over dry leaves,grass,
or combustible materials.
28. It isa violation of California Public ResourceCode
Section4442 to use or operatethe engine on or nearany
forest-covered, brush-covered, or grass-covered land
unlessthe exhaustsystem is equippedwith a spark
arrester meeting anyapplicablelocal or state laws. Other
states or federalareasmay havesimilar laws.
29. OSHAregulations may require the useof hearing
protection whenexposedto sound levelsgreaterthan 85
dBAfor an 8 hour time period.
A CAUTION
O his machineproducessoundlevels in
excessof85 dBAat the operator'sear and
cancausehearinglossthroughextended
periodsofexposure.
Wear hearingprotectionwhen operatingthis
machine.
TRANSPORTING AND STORAGE
1. Whentransporting the unit on an open trailer, makesure
it is facing forward, in the direction oftravel. If the unit
is facing backwards,wind lift could damagethe unit.
2. Always observesafe refuelingand fuel handling practices
when refuelingthe unit after transportation or storage.
3. Neverstore the unit (with fuel) in an enclosedpoorly
ventilated structure. Fuelvapors can travelto an ignition
source (such asa furnace, water heater,etc.)and cause
an explosion. Fuelvapor is alsotoxic to humans and
animals.
4. Always follow the engine manualinstructions for
storage preparationsbefore storing the unit for both
short and long term periods.
5. Always follow the engine manualinstructions for proper
start-up procedures when returning the unit to service.
6. Neverstore the unit or fuel container inside wherethere
isan openflame or pilot light, such asin a water heater.
Allow unit to cool beforestoring.
ImportantOperatorSafety Instructions(Continued)
o_
r#3
SLOPE OPERATION
Slopesarea majorfactor relatedto loss-of-controlandtip-over
accidents,which can resultin severeinjury or death.Operation
on all slopesrequiresextracaution.If youcannot backupthe
slopeor if youfeeluneasyon it, do not operateon it.
Controlof awalk-behindor ride-onmachinesliding on a slope
will not be regainedbythe applicationof thebrake. Themain
reasonsfor lossof control are:insufficienttire grip on the
ground,speedtoo fast,inadequatebraking,thetypeof
machineis unsuitablefor its task,lack ofawarenessofthe
groundconditions, incorrecthitching andload distribution.
1. Mow across slopes, not up and down.
2. Watch for holes, ruts, or bumps. Uneventerrain could
overturn the unit. Tallgrass canhide obstacles.
3. Choosea slow speedsothat you will not haveto stop or
changespeedswhile on the slope.
4. Donot mow on wet grass. Tires may loosetraction.
5. Avoid starting, stopping, or turning on a slope. Iftires
losetraction (i.e. machine stops forward motion on a
slope), disengagethe blade(s) (PTO)and driveslow off
the slope.
6. Keepall movement on slopes slow and gradual. Donot
makesuddenchanges in speedor direction, which could
causethe machineto rollover.
7. Useextra carewhile operating machineswith grass
catchers or other attachments;they can affect the
stability of the unit. Do not useon steepsslopes.
B. Donot try to stabilizethe machine by putting your foot
onthe ground (ride-on units).
9. Donot mow near drop-offs, ditches, or embankments.
The mower could suddenly turn over if a wheel isover
the edge of a cliff or ditch, or if an edgecavesin.
10. Donot usegrass catchers on steepslopes.
11. Donot mow slopes ifyou cannot back up them.
12. Seeyour authorized dealer/retailerfor recommendations
ofwheel weights or counterweights to improve stability.
13. Removeobstacles such as rocks, tree limbs, etc.
14. Useslow speed.Tires may losetraction on slopes even
though the brakesarefunctioning properly.
15. Donot turn on slopes unless necessary,and then, turn
slowly and gradually uphill, if possible. Never mow
down slopes.
TOWED EQUIPMENT (RIDE-ON UNITS)
1. Tow only with a machinethat hasa hitch designedfor
towing. Donot attachtowed equipmentexceptat the
hitch point.
2. Followthe manufacturer'srecommendationsfor weight
limit for towed equipment and towing on slopes. See
attaching a trailer under OPERATION.
AWARNING
Never operate on slopesgreaterthan150whichis a
rise of 5.4 feet (1,6 m) vertically in20 feet (6 m)
horizontally.
Selectslow groundspeedbeforedrivingontoslope.
Useextracaution when operating on slopeswith rear-
mountedgrasscatchers.
Mow acrosstheface of slopes, notup anddown,use
cautionwhen changingdirectionsandDONOTSTART
ORSTOPONSLOPE.
3. Neverallow children or others in or on towed equipment.
4. Onslopes,the weight of thetowed equipment maycause
loss of traction and loss of control.
5. Travelslowly and allow extra distanceto stop.
6. Donot shift to neutral and coast down hill.
CHILDREN
Tragicaccidentscanoccur ifthe operatorisnot alertto the
presenceofchildren. Childrenare oftenattractedto the unit
andthe mowingactivity. Neverassumethat childrenwill
remainwhereyou lastsawthem.
1. Keepchildren out ofthe mowing areaand under the
watchful care of anotherresponsible adult.
2. Bealert andturn unit off if children enterthe area.
3. Beforeand during reverseoperation, look behind and
downfor small children.
4. Nevercarry children, evenwith the blade(s) off. They
may fall off and beseriously injured or interfere with safe
unit operation. Childrenwho havebeengiven rides in
the past maysuddenly appear in the mowing areafor
another ride and be run over or backedover bythe
machine.
5. Neverallow childrento operatethe unit.
6. Useextra carewhenapproaching blind corners, shrubs,
trees, or other objectsthat may obscure vision.
EMISSIONS
1. Engineexhaustfrom this product contains chemicals
known, in certain quantities,to causecancer,birth
defects,or other reproductive harm.
2. Lookfor the relevant Emissions Durability Period andAir
Index information on the engineemissions label.
IGNITION SYSTEM
1. This spark ignition system complies with CanadianICES-
002.
6 www.snapper.com
ImportantOperatorSafety Instructions(Continued) ---
SERVICE AND MAINTENANCE
Safe HandlingofGasoline
1. Extinguishall cigarettes, cigars, pipes, and other sources
of ignition.
2. Useonly approvedgasolinecontainers.
3. Neverremovethe gascap or add fuel with the engine
running. Allow the engineto cool before refueling.
4. Neverfuel the machineindoors.
5. Neverstore the machine or fuelcontainer where there is
an open flame, spark, or pilot light such as neara water
heateror other appliance.
6. Neverfill containers inside a vehicle or on atruck bed
with a plastic bed liner. Always placecontainerson the
ground away from your vehicle beforefilling.
7. Removegas-poweredequipment from the truck or trailer
and refuelit on the ground. If this is not possible,then
refuelsuch equipment on a trailer with a portable
container, ratherthan from a gasoline dispensernozzle.
8. Keepnozzlein contact with the rim of the fueltank or
container opening atall times until fueling is complete.
Donot usea nozzlelock-open device.
9. If fuel isspilled on clothing, changeclothing immediately.
10. Neverover-fill the fuel tank. Replacegascap andtighten
securely.
11. Useextra carein handling gasolineand other fuels. They
are flammable and vapors areexplosive.
12. If fuel isspilled, do not attempt to start the enginebut
movethe machineawayfrom the areaof spillageand
avoid creating anysource of ignition until fuel vapors
havedissipated.
13. Replaceall fuel tank caps and fuel container caps
securely.
Service& Maintenance
1. Neverrun the unit in an enclosed areawherecarbon
monoxide fumes may collect.
2. Keepnuts and bolts, especiallyblade attachmentbolts,
tight and keepequipment in good condition.
3. Nevertamper with safety devices.Checktheir proper
operation regularlyand makenecessaryrepairs ifthey
are not functioning properly.
4. Keepunit freeof grass, leaves,or other debris build-up.
Cleanup oil or fuel spillage, and removeany fuel-soaked
debris. Allow machineto cool beforestorage.
5. If you strike an object,stop and inspectthe machine.
Repair,if necessary,before restarting.
6. Nevermakeadjustments or repairs with the engine
running.
7. Checkgrass catchercomponents and the discharge
guard frequently and replacewith manufacturer's
recommendedparts,when necessary.
8. Mower bladesare sharp. Wrap the blade or weargloves,
and useextra caution whenservicing them.
9. Checkbrakeoperationfrequently. Adjust andservice as
required.
10. Maintain or replacesafety and instructions labels,as
necessary.
11. Donot removethe fuel filter whenthe engine is hot as
spilled gasoline may ignite. Do not spreadfuel line
clamps further than necessary. Ensureclamps grip
hosesfirmly overthe filter after installation.
12. Donot usegasolinecontaining METHANOL,gasohol
containing more than 10% ETHANOL,gasoline additives,
or white gasbecauseengine/fuel system damagecould
result.
13. If the fuel tank must be drained,it should be drained
outdoors.
14. Replacefaulty silencers/mufflers.
15. Maintain or replacesafety and instruction labelsas
necessary.
16. Useonly factory authorized replacementparts when
making repairs.
17. Always comply with factory specifications on all settings
and adjustments.
18. Onlyauthorizedservice locations should be utilized for
majorservice and repair requirements.
19. Neverattempt to make major repairson this unit unless
you havebeen properlytrained. Improper service
procedurescan result in hazardousoperation, equipment
damageand voiding of manufacturer'swarranty.
20. On multiple blade mowers, take careas rotating one
bladecancause other bladesto rotate.
21. Donot changeengine governor settings or over-speed
the engine. Operatingthe engine atexcessivespeedcan
increasethe hazardof personal injury.
22. Disengagedrive attachments,stop the engine,remove
the key,and disconnect the spark plug wire(s) before:
clearing attachmentblockagesand chutes, performing
service work, striking an object, or if the unit vibrates
abnormally. After striking an object, inspectthe machine
for damageand make repairsbefore restartingand
operatingthe equipment.
23. Neverplacehandsnearthe moving parts,such asa
hydro pump cooling fan, when thetractor is running.
(Hydro pump cooling fans aretypically located on top of
the transaxle).
24. Unitswith hydraulic pumps, hoses,or motors:
WARNING:Hydraulicfluid escaping under pressure may
havesufficient force to penetrateskin and causeserious
injury. If foreign fluid is injected into the skin it must be
surgically removedwithin a few hours bya doctor
familiar with this form of injury or gangrene may result.
Keepbodyand handsaway from pin holes or nozzles
that eject hydraulic fluid under high pressure. Usepaper
or cardboard, and not hands,to search for leaks. Make
sure all hydraulic fluid connections aretight and all
hydraulic hoses and linesare in good condition before
applying pressure to the system, if leaks occur,havethe
unit servicedimmediately byyour authorized dealer.
25. WARNING:Stored energydevice. Improper releaseof
springs can result in serious personalinjury. Springs
should be removedby an authorized technician.
26. Models equippedwith an engine radiator:WARNING:
Storedenergydevice. Topreventserious bodily injury
from hot coolant or steam blow-out, neverattempt to
removethe radiatorcapwhile the engine is running.
Stopthe engineand wait until it is cool. Eventhen, use
extremecare when removingthe cap.
SafetyDecals
This unit hasbeendesignedand manufacturedto provide
you with thesafety and reliability you would expectfrom an
industry leaderin outdoor powerequipment manufacturing•
Although readingthis manualand the safety instructions it
contains will provideyou with the necessarybasic knowledge
to operatethis equipment safelyand effectively,we have
placedseveralsafety labels onthe unit to remindyou of this
important information while you are operatingyour unit.
All DANGER,WARNING, CAUTIONand instructional
messageson your rider and mower should be carefully read
P/N:
AMPUTATION AND PELIGRO DE
PINCH POINT AMPUTACION Y PARTE$ "Decal,
HAZARD PUNTiAGUUA$
Paleevit_raigunalesidnde Warning,
rotatingparts, stayclear losparsesDilatories,al_iese
ofpartsandkeep all delospartesy manterlga Handin
shieldsandguardsin redeslospantaliasy guardas
pl......... lugar. Pulley"
and obeyed•Personalbodily injury can result when these
instructions are not followed. Theinformation is for your
safetyand it is important! Thesafety decals beloware on
your rider and mower•
If any ofthese decals are lost or damaged, replacethem at
once. Seeyour local dealerfor replacements.
Theselabelsare easilyapplied and will act asa constant
visual reminder to you, and others who may usethe
equipment,to follow the safety instructions necessaryfor
safe,effectiveoperation.
AMPUTATION PELJGRODEAMPUTACION
HAZARD _r_ Paraevitarlesionescausadas
Toavoidinjuryfrom _----_,d parloscuchilles,mantenerse
rotatingblades,stay _ alejadodelbordedeJa
clearofdeckedge.
P/N:5100088
"Decal, Danger,
Mower"
P/N:5100709 "Decal, Danger,Fire (SP)"
P/N: 5100708 "Decal, Danger,Fire"
AMPUTATION AND THROWN
OBJECTS HAZARD
To avoid in}ury from rotating blades,
stay clear of deck edge and keep others
away• Do not mow without discharge
chute or entire grass catcher in place.
PELIGRODEAMPUTACIONY OBJETOSARROJADOS
Pare evitar sufrir lesionee causadas per Jas euchillas
giratodas y obietos lanzados, mantenerse ale ado del borde
de la glataforma de corte y manteoer a los demos personas
ale adas de la m_quina. No user la m_quina sin eJtubo de
descarga o sin e recogedor de paste en su ugar.
m m
P/N: 5101292 "Decal, Danger,MowerDischarge"
8 www.snapper.com
IdentificationTags
_\%_,dkee, WJ 53261 USA
,iMm,i . m,l,mm
SER,.L.o. xx×x_
NorthAmerican
Models
Whencontactingyourauthorizeddealer forreplacement
parts,service, or informationyouMUST havethese
numbers.
Recordyour model name/number, manufacturer's
identification numbers, and engineserial numbers in the
spaceprovided on the inside front cover for easyaccess.
Thesenumbers can befound in the locations shown.
NOTE."For locationof engineidentification numbers, refer to
theengine owner's manual
UnitID Tag
SAFETYINTERLOCKSYSTEM
This unit is equippedwith safety interlock switches. These
safety systems are presentfor your safety,do not attempt
to bypasssafety switches, and nevertamper with safety
devices. Checktheir operation regularly.
Operational SAFETYChecks
Test1 -- EngineshouldNOTcrank if:
• PTOswitch is engaged,OR
• Parkingbrakeis not engaged,OR
• Ground Speed/ SteeringControl Leversare not in the
NEUTRALposition.
Test2 -- EngineSHOULDcrankandstartif:
• PTOswitch is NOTengaged,AND
• Parkingbrakeis engaged,AND
• Ground Speed/ SteeringControl Leversare locked in
the NEUTRALposition.
Test3 -- EngineshouldSHUTOFFif:
• Operatorrises off seatwith PTOengaged,OR
• Operatorrises off seatwith parking brakedisengaged.
• Operatormovesground speed/steering control levers
out of their neutral positions beforedisengagingparking
brake.
Test4 -- BladeBrakeCheck
Mower bladesand mower drivebelt should come to a
completestop within five (5) secondsafter electric PTO
switch is turned off (or operator rises off seat). If mower
drive belt doesnot stop within five (5) seconds, seeyour
dealer.
NOTE."Oncethe enginehas stopped,PTOswitch must be
turned off, parking brakemust be engaged,and theground
speed/steering control levers must be locked in the
NEUTRALposition after theoperator returns to theseat in
order to start theengine.
WARNING
If the unitdoesnotpassa safetytest, do notoperate
it. See yourauthorizeddealer. Underno
circumstance shouldyouattemptto defeatthe
purposeofthe safetyinterlocksystem.
e=
SafetyIcons
Thealertsymbol A is usedto identity safety information
about hazardsthat can result in personal injury. A signal
word (DANGER,WARNING,or CAUTION)is usedwith the
alertsymbol to indicate the likelihood and the potential
severity of the injury. Inaddition, a hazardicon may be used
to representthe type of hazard. An explanationof hazard
levels and icons are asfollows:
DANGER
This indicatesa hazardwhich, if not avoided,will result in
seriousinjuryor death.
'_ WARNING
This indicatesa hazardwhich, if not avoided, couldresultin
serial injuryor death.
,i_ CAUTION
This indicatesa hazardwhich, if not avoided, mightresultin
minor ormoderateinjury.
CAUTIONor NOTICE
Thesemessagespresentedwithout the alertsymbol indicate
a situation wherethe unit or property could be damaged.
® ® ©
® @ OD
® ®
®
,Jl_JllfJlJ_lls_J,
@ © ® ® ®
Figure 1. SafetyIcons
A, Alert
B. ReadtheManual
C. ToxicFumes
D, FireHazard
E. No Smoking
E Hot Surface
G, Keep ChildrenAway
@ ®
H. Amputation - RotatingParts
L PinchPoint
J. Thrown Objects
K. Amputation - Footin Blade
L, Amputation - Handin Blade
M. Slippery Slopes
N. Machine TipOver
O. RofloverHazard
P, Drop OffHazard
Q. Shield Eyes.ExplosiveGasescan
causeblindness or injury
R, No Sparks,Flamesor Smoking
S. CorrosiveSubstance
T, FlushEyes Immediately with water.
GetMedical help fast.
10 www.snapper.com
Assembly
Readand followthe assemblyandadjustment
instructionsforyourmower.
All fasteners arein thepartsbag. Do notdiscard
anypartsor material untilthe unitis assembled.
NOTE:Inthis instruction book, left and right describethe
location of a part with the operator onthe seat.
PartsBag- Contents
Thefastenersandotherloosepartsareshownbelow.Thequantity
isshownin brackets().
AWARNING
Beforedoinganyassemblyor maintenancetothe
mower,removethewires fromthespark plugs.
3
@0
@0
Figure2. Parts Bag Components
A. 5/16 Nylock FlangeNut (Qty."4)
11
E
Installthe GroundSpeed/ SteeringControl
Levers
Positioningthe GroundSpeed/ SteeringControlLevers:
Theground speed/steering control levers (A,Figure3) must
be moved to the upright position beforeattempting to operate
the machine.
1. Removethe bottom mounting hardware (B). Discardthe
manillatag (C).
2. Loosenthe upper mounting hardware (D).
3. Position the ground speed/ steering control levers in the
upright position. See Figure3.
4. Loosely install the 5/16-18 X 1" bolt (E),5/16" lock
washer (F),and 5/16" flat washer(G)through the ground
speed/ steering control leverinto the control leverbase
(H)as shown in Figure3.
5. Repeatprocess for other side of unit.
LeverAlignmentAdjustment:
1. Fromthe neutral position, pivot the ground speed/
steering control levers in towards the center of the
machine. If one of the levers is tilted further forward (B,
Figure4) or back (A) then the other lever,pivot the levers
forward or backwardsto align with eachother (C).
Tighten the mounting bolts.
ShippingPosition.......... __../_
Figure3, Instafl Control Levers (Left Side Shown)
A. Control Lever
B, Bottom Mounting Hardware
C. Manilla Tag
D. UpperMounting Hardware
E. 5/16-18x 1"Bolts
F, 5/16 Lock washers
G. 5/16 Washers
H. Control LeverBase
® ® ©
Figure4, LeverAlignment & PlacementAdjustment
A, LeversMisaligned (OneLever TiltedBehind theOther)
B, LeversAlignedIncorrectly (OneLever TiltedIn Front of
theOther)
C. LeversAligned Correctly
12 www.snapper.com
Seat& SafetySwitchAssembly
1. Pivot theground speed/ steering control levers out to
the NEUTRALposition and pivot the seat plate (B,Figure
5) forward.
2. Mount the seat (A) to the seat plate (B) usingfour 5/16-
18 nylock flangenuts (C)andtighten securely.
3. Pressthe seatswitch wire harnessend (D) ontothe seat
switch until the latch of the seat switch wire harness end
snaps down over the lock on the seatswitch.
¢'D
3
Figure5. SeatInstallation
A, Seat
B. SeatPlate
C. 5/16-18 Nylock FlangeNut (4)
D, SeatSwitch WireHarness
SeatAdjustment
Theseatand ground speedcontrol levers should be adjusted
sothat operator's elbowsaresupported bythe arm rests
when his/her hands are onthe controls, and the ground
speedcontrol levers canbe movedthrough their full range of
motion without contacting the operator's legs.
Seat Position Adjustment
Theseatcan be adjustedforward and back. Movethe
adjustment lever (A, Figure6) towards the left hand side of
the machine,slidethe seat to the desired position, and
releasethe lever.
Figure6. SeatAdjustment
A. Adjustment Lever
13
E
r_
ChargeThe Battery
,d WARNING
BATTERYSAFETYRULES
• Batteryacidcausessevereburns.Avoidcontactwith
skin.
• Wear eye protectionwhile handlingthe battery.
• Toavoidan explosion,keepflamesandsparksaway
from battery,especiallywhile charging.
• Wheninstallingbatterycables, CONNECTTHE
POSITIVE(+) CABLEFIRSTand negative(-) cable last.
If not donein this order,the positiveterminal canbe
shortedtotheframe by a tool.
IMPORTANT:Beforeattempting to operatethe machinefor
the first time, checkthe batterydate. Thebattery date
will tell you if the battery needsto becharged.
1. Tip the seatforward to access the battery.
2. Checkthe top of the battery for the battery date.
3. If the battery is put into servicebefore the battery date,
then the battery doesnot haveto becharged.
4. If the battery is put into serviceafter the battery date,
then the battery must be charged. SeeStep5.
5. Tochargethe battery, follow the instructions provided by
the battery charger manufacturer aswell asall warnings
included in the safety rulessection of this document.
Chargethe battery until fully charged (until the specific
gravity ofthe electrolyte is 1.250 or higher and the
electrolyte temperature is at least60° F). Donot charge
at a rate higher than 10 amps.
Figure 7. Battery
A, Positive Cable& Cover
B, NegativeCable
C. Rubber Hold-Down Strap
14 www.snapper.com
Howto Preparethe Engine
NOTE:Theengine was shipped from thefactory filled with
oil. Checkthe levelof the oil. Add oil as needed.
NOTE:Theoperation of a new enginewill sometimes result
in a slight amount of smoke. This smoke is causedby paint
or oil on or around the muffler. This is normal and only
expectedduring initial operation.
A separateengine manualis also includedwith the unit. See
this engine manualfor the manufacturer's instructions for
thetype of oil and gasolineto use. Beforeyou usethe unit,
readthe information on safety,operation, maintenanceand
storage.
, WARNING
Followtheenginemanufacturer'sinstructionsfor the
typeof gasolineand oil to use. Alwaysusea safety
gasolinecontainer. Donotsmokewhen adding
gasolineto theengine. When insideandenclosure,do
notfill with gasoline. Beforeyouadd gasoline,stop
the engine. Lettheenginecool for several minutes.
IMPORTANT:This unit isequipped with an internal
combustion engine and must not be usedon or near any
unimproved forest-covered, brush-covered or grass-covered
land unless the engine'sexhaustsystem is equipped with a
spark arrestor meeting applicablelocalor state laws(if any).
If a spark arrestor is used, it must be maintained in effective
working order bythe operator.
In the stateof Californiathe aboveis required by law
(Section 4442 ofthe California Public ResourcesCode).
Otherstates may havesimilar laws. Federallaws apply
federallands.
In some areas, locallaws requiresthe useof a resistor spark
plug to control the ignition signals. Seean Authorized
ServiceCenterfor a resistor spark plug for the engine.
NOTE:Actual sustained horsepower will likely be lower due
to operating limitations and environmental factors.
CheckTire Pressures
Tirepressure should becheckedperiodically,and maintained
atthe levels shown in the chart. Notethat these pressures
may differ slightly from the "Max Inflation"stampedon the
side-wall of the tires. The pressuresshown provide proper
traction, improve cut quality, and extendtire life.
Tire Pressure
Front 25 psi (1,72 bar)
Rear 15 psi (1,03 bar)
Figure8, CheckingTirePressure
¢"D
3
15
FeaturesandControls
=n
z=,=
CONTROLFUNCTIONS
Theinformation below briefly describesthe function of individual controls, Starting, stopping, driving, and mowing require the
combined useof several controls applied in specific sequences. Tolearn what combination and sequenceof controls to usefor
various tasks seethe OPERATIONsection,
GroundSpeed/ SteeringControlLevers
Theseleverscontrol the ground speedand steering control
of the rider.The left levercontrols the left rear drive wheel
and the right controls the right rear drive wheel.
Moving a leverforward increasesthe FORWARDspeedof
theassociated wheel,and pulling back on a leverincreases
the REVERSEspeed.
Thefurther a leveris movedaway from the neutral position
thefaster the drive wheelwill turn.
Seethe OPERATIONsectionfor steering instructions.
Throttle Control
Thethrottle controls engine speed. Movethe throttle forward
to increaseengine speedand backto decreaseengine speed.
Alwaysoperateat FULLthrottle.
Choke
Closethe choke for cold starting. Openthe choke oncethe
engine starts. A warm engine may not require choking. Pull
the knob up to close the choke. Pushthe knob down to
openthe choke.
Ignition Switch
Theignition switch starts and stops the engine; it hasthree
positions:
OFF
H RUN
Stops the engineand shuts off the
electricalsystem.
Allows the engineto run and powers
the electrical system.
[_J START Cranksthe engine for starting.
NOTE."Neverleavethe ignition switch in the RUNposition
with theengine stopped-this drains thebatted4
16 www.snapper.com
B HourMeter
Thehour meter measuresthe number of hours the key has
beenin the RUNposition.
Note: Thehour meter will register thepassage of time when
thekey is in the RUNposition, evenif the engine is not
running. Thehour meterhas aselfcontainedpower source
so the total hours arealways visible.
_PTO Switch
ThePTO(Blade Engage)switch engages(turns the blades
on) and disengages(turns the bladesoff) the mower deck.
Toengagethe PTO,pull UPon the switch. Push DOWNto
disengage.Notethat the operator must be seatedfirmly in
the rider seat for the PTOto function.
Transmission Oil Fill
Transmissionoil is addedthrough thetransmission oil
reservoirs. It also servesasextra holding capacity for oil as
thetransmissions heatup and the oil expands. SeeCHECK
TRANSMISSIONOIL LEVELfor oil level checkand fill
procedures.
TransmissionReleaseLevers
Thetransmission releaselevers deactivatethe transmissions
sothat the unit can be pushedby hand. SeePUSHINGTHE
UNIT BYHANDfor operationalinformation.
SeatAdjustmentLever
Theseatcan be adjustedforward and backward. Move the
adjustment levertowards the left, slidethe seat to the
desiredposition, and releasethe lever.
FuelTank
FuelLevelGauge
Toremovethe cap, turn counterclockwise. Thefuel gauge is
mounted in the fueltank and indicatesthe amount of fuel in
the tank.
Mower Height of Cut Adjustment
Toadjust cutting height, pull the large leverback fully to lock
the control in the attachment raisedtransport position.
Position the cutting height selector pin on the appropriate
hole to achievethe desiredcutting height. Pull backon the
small lift latch leverand large leversimultaneously, and
lower the mower into cutting position.
Forattachmenttransport lift, pull the large lift lever backfully
to lock the control in the attachment raisedtransport
position.
ParkingBrake
DISENGAGE
ENGAGE
Releasesthe parking brake.
Locksthe parking brake.
Pull the parking brakelever backto engagethe parking
brake. Move the leverfully forward to disengagethe parking
brake. NOTE."Tostart the unit theparking brakemust be
engaged.
o
t_
m
17
o
Operation
GeneralOperatingSafety
Beforefirst time operation:
• Besureto read all information in the Safetyand
Operationsections beforeattempting to operatethis
tractor and mower.
• Becomefamiliar with all of the controls and howto stop
the unit.
• Drive in an open areawithout mowing to become
accustomedto the unit brake leveror set the parking
brake.
_WARNING
Never operate on slopesgreaterthan(15°) whichisa
rise of 5.4 feet (1,6 m) verticallyin 20 feet (6 m)
horizontally.
Selectslow groundspeedbeforedrivingontoa slope.
Useextracautionwhen operatingonslopeswith a
rear-mountedgrasscatcher.
Mow acrosstheface ofslopes, notup and down,use
cautionwhen changingdirectionsandDONOTSTART
ORSTOPONSLOPE.
A WARNING
Never allow passengersto rideon theunit.
Beforeleaving theoperator'spositionforany reason,
engagetheparkingbrake, disengagethe PTO,stopthe
engine andremovethekey.
Toreducefire hazard,keepthe engine,tractorand
mowerfree of grass, leavesand excessgrease. Do not
stopor parktractorover dryleaves, grassor
combustible materials.
Gasolineis highlyflammable and mustbe handled
with care. Never fill thetankwhen theengineis still
hotfrom recentoperation. Donot allowopen flame,
smokingor matchesin thearea. Avoidover-filling and
wipe up anyspills.
ChecksBeforeStarting
• Checkthat crankcaseis filled to full mark on dipstick.
Seethe engine Operator'sManualfor instructions and oil
recommendations.
• Makesureall nuts, bolts, screws and pins are in place
and tight.
• Adjust the seatposition, and makecertain you can reach
all controls from operator's position.
° Fillthe fueltank with fresh fuel. Referto engine manual
for fuel recommendations.
Figure9. Pre-Start Checks
A. Fuel TankCap
B. CrankcaseOilFill
C. SeatAdjustment Lever
WARNING
Do notloadthis zero-turnrider on a trailer ortruck
usingtwoseparateramps. Onlyusea single rampthat
isat leastone foot widerthanthewidth of therear
wheels ofthis rider. Thisrider hasa zeroturning
radiusandthe rear wheels could fall off theramps, or
therider could tip over injuringtheoperatoror
bystanders.
18 www.snapper.com
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/