Sylvania SRCD427P Owner's manual

Brand: Sylvania

Model: SRCD427P

Category: Cassette players

Type: Owner's manual

SYLVANIA

7P {27in

I INSTRUCCIONES EN ESPANOL INCLUIDAS. I

_ AS an ENERGY STAR ®

_ s{_ Partner, our company has

determined that this product meets

the ENERGY STAR ® guidelines for

energy efficiency. ENERGY STAR ®

is a U.S. registered mark.

S A<hIIESSO£HiS

ACCESSORIES PART NO.

RemoteControlUnit NE204UD

Batteries 2 AA Batteries

OwIler's Manual 1EMN20050

WARNING: TO REDUCE THE RISK OF FIRE OR ELE(TRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTmON

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The caution marking is located on the rear of tile cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read i_rstructions-AH the sat)ty aud operating instructions

should be read be%re tile appliauce is operated.

2.Retail_ lnstruetiol_s-The safety and operatiug instructions

should be retained ;%r future reM'ence.

3.Heed Warnings-AH warnings on tile appliance aud ill tile

operating instructions should be adhered t(e

4.Follow Instructions-All operating and use instructions

should be %Howed.

5.Cleaning-Uuplng TV/VCR/DVD flora tile wal] outlet beR}re

cleauiug. Do uot use liquid cleauers ol aerosol cleaners. Use

a damp cloth tot cleaning.

EXCEPTION: A product that is meaut tbr uuinten upted

service and, that t\}r sorne specific reason, such as tile possi-

bility of the _oss of an autllo]ization code R_r a CATV con-

verter, is not intended to be unplugged by the use] tor cleau-

lug or ally other purpose, may exclude tile retereRce to

uupklgging tile appliance in tile cleauiug description other-

wise required ill item 5,

6.Attachments-Do uot use attachments uot recommeuded by

tile TV/VCR/DVD mauufi_ctm'e] as they may cause hazards.

7.Water and Moistm'e-Do not use this TV/VCR/DVD near

water-%r examp]e, ileal' a bath tub, wash bowl kitcheu sink,

or ]auudry tub, iu a wet basemeut, or hear a SWilYil't/iug pool,

and tile like.

&Accessories-Do not place this TV/VCR/DVD ORan uustable

cart, staud, tripod, bracket, or table. The TV/VCR/DVD may

tall causiug serious injury to someoue, alld serious damage

to tile appliauce. Use ouly with a cmL stand, tripod, b]ackeL

or table lecommended by tile mauufacturen ol sold with tile

TV/VCR/DVD. Auy mouuth/g of

tile appliauce should tollow tile PORTABLE_CARTWARNING

Yi/auufac[urer's iustrL!ctious and ,._I'IL.

should use a ulouutiug accessory

recommeuded by tile mauutactureL

Au appliauce aud cart combiuatiou

should be moved with care.Quick

stops, excessive force_ aud Lu/eveu

sm_aces Ynaycause tile appHauce

aud cP_rtcolr/biuatiou to overtNru_

AMEUBLES- Cet apparei! ne doit

8YMBOLE D'AVERTISSEMENT POUR

8ire p_ac8 que sur UNmeuble (avec LESCOMPOSANTES

APRAREIL ET MEUBLE A ROULETTES

ou saus rokdettes} recou]_uaud_ par

le tabricaut. Si vous lqnstaHez sur

un meuble _trotflettes, d6placez _es

deux ensembles avec pr_cautJou.

Uu arr&t bmsque, Futilisation

d'uue force excessh'e et des SUl'-

faces irr6guH&res ]isqueut de d&ta-

biHse] l'eusemb_e et de _e ]euverseL

9. Ventilatiol>Slots and openiugs iu tile cabiuet aud the back

or bottom are provided tol veutHation and to ensure reHab]e

operation of tile TV/VCR/DVD and to p]otect it trom over-

heating, and these openings must uot be blocked o] cov-

ered. The openiugs should never be Nocl<ed by placing the

TV/VCR/DVD ou a bed, sota, rug, or other similar surface.

This TV/VCR/DVD should ueve] be placed uear or ore] a

radiator or heat ]egister. This TV/VCR/DVD shoukl uot be

placed iu a built-in installation such as a bookcase or rack

tmless propel veutHation is provided or tile mauufacturer's

iustructious have been adhered to.

HI.Power Som'ces-This TV/VCR/DVD shoNkl be operated

ouly from tile type of power source iudicated oil the mark-

lug _abeL It you are not sure of the type of power supp b, to

your honae, consult youl appliauce dea_er ol _oca_ power

company. For TV/VCR/DVDs intended to operate from

batter?, power, or other sources, refer to tile operating

instructions.

1lA_rounding or Polarizatiol>This TV/VCR/DVD is

equipped w'ifl/a polarized alte]uatiug-curreut Hue phlg(a

phlg having one bktde wider than tile other). This plug will

tit iuto tile power outlet only one way. This is a satety l_ea-

ture. It you are uuable to iusert tile phlg f'uHy into file ONF

let, try 1eve]sing file ph% If tile phtg should still fall to tit,

contact your e_ectriciau to replace your obsolete outlet. Do

uot defeat the safety purpose ot the polarized ph%

12.Power-Cord Proteetiol>Powe]-suppl} cords should be

routed so that tile),' are not HI<ely to be waH<ed on or

piuched by items ph_ced upon or against them, paying par-

ticular attention to cords at phlgs, couvenience receptacles,

and tile point where tile) exit trom tile appliance.

- 2 - EN

IBI5

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND

CLAMP_,

LEADIN

WIRE

ELECTRIC

SERVICE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810 20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

NED NATIONAL ELECTRICAL CODE

S2898A

13.Outdoor A_tennagrom_ding-Kanoutsideanteuna or

cable system is connected to the TV/VCR/DVD, be sure

the auteuna or cable system is grounded so as to provide

some protectiou agaiust voltage surges and built-up static

charges. Article S]0 of the Natioua] E_ectrica_Code,

ANS1/NFPA No. 70, provides h#ormatiou with respect to

proper grouudiug of the mast aud supporfiug structure,

grouudh/g of the _ead-iu wh'e to an antenna discharge uuiL

size of grouudiug couductors_ Iocafiou oi anteuna<tischarge

tufit, couuectiou to grounding electrodes, aud lequiremeuts

IL)Ithe grouudiug electrode. (Fig. A)

14.Lightning°For added protectiou to1 this TV/VCR/DVD

receiver dm'iug a _[ghmiugstom_, or when it is left uuat-

teuded and uuused ior Ioug periods of time, uuplug it from

the war outlet aud discounect the antenua or cable system.

This will plevent damage to the TV/VCR/DVD due to

lightning and power-line surges.

15.Power Lines-An outside anteuua system should uot be

located iu the vicinity of overhead power Hues or other

electric light or power circuits, or where it cau far iuto

such power liues ol ch'cuits. When iustalliug an outside

antemla system, extreme care shoukl be takeu to keep flom

touching such power _iuesor cimuits as coutact with them

might be tara].

1&Overloading°Do uot oveHoad wa!l outlets aud extensiou

cords as this cau _esult in a risk of fire or electric shock.

17A)bjeet a_d Liquid Entry-Never push objects of auy kind

into this TV/VCR/DVD through opeuiugs as they may

touch daugerous vohage poh/ts or short out parts that couM

result h/ a fire or electric shock. Never spill Ikluid of any

kind ou the TV/VCR/DVD.

l&Servking-Do not atttempt to service this TV/VCR/DVD

yourseK as opening o_ lemoviug covers may expose you to

daugewus voltage or other hazards. Re%r all serviciug to

qualified service persouuel.

-- POWER SERVICE GROUNDING

.-_-41I---- ELECTRODE SYSTEM

(NEO ART 250 PART R)

19.Damage Requh°h_g Service-Unplug this TV/VCR/DVD

flora the wall outlet aud refer selviciug to qualified service

pelsouue_ uuder the toHowiug couditious:

a. Wheu the powe>supp_y cord or p_ug is damaged or frayed.

b. if _iquid has been spilled, or o{!iectshave tal[eu into the

TV/VCR/DVD.

c. if the TV/VCR/DVD has been exposed to rain or waten

d. if the TV/VCR/DVD does not operate uormally by follow-

ing the operatiug iustructious. Adjust ouly those coutrols

that are covered by the operatiug iustmctious, as improper

adjustu_eut oi other coutrols may result in damage aud will

ofteu require exteusive work by a qualified techuiciau to

restore the TV/VCR/DVD to its uorma_ operafiou.

e. if the TV/VCR/DVD has been dropped or damaged in any

way.

t. Wheu the TV/VCR/DVD exhibits a distinct change in per-

tormance-this indicates a need ti_r service.

2O.Replacement Parts-Wheu replacemeut parts are required,

be sure the service techniciau has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unautholized substitutious may

result iu fire, electric shock, iujury to persons or other haz-

ards.

21.SM_ty Check-Upou completiou ot any service or repairs to

this TV/V(R/DVD, ask the service techuiciau to peltorm

routine satiety checks to detem_iue that the TV/VCR/DVD

is iu proper operatiug condition.

22,Heat-This TV/VCR/DVD product shouM be situated away

flora heat sources such as radiators, heat registe]s, stoves,

or other products dncludiug amplifiers) that produce heat.

- 3 - EN

IB[5

IMPORTANTCOPYRIGHTINFORMATION

Unauthorizedcopying,broadcasting,publicperfur-

manceandlendingofdiscsareprohibited.

Thisproductincorporatescopyrightprotectiontech-

nologyflintisprotectedbymethodclaimsofcertain

U.S.patentstrodotherintellectualpropertyrights

ownedbyMacrovisionCorporationtrodotherrights

owners.Useofthiscopyrightprotectiontechnology

mustbeauthorizedbyMacrovisionCorporation,

andisintendedforhometrodotherlimitedviewing

usesonlyunlessotherwiseauthorizedby

MacrovisionCorporation.Reverseengineeringor

disassemblyisprohibited.

FCCWARNING-Tiffs equipment may gener-

ate o1"use radio fi_equency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual The user could lose fl_e authority to oper-

ate this equipment if an unauthorized change

or modification is made°

RADIO-TV INTERFERENCE

This equipment lias been tested and R)und to com-

ply with Hie limits _br a Class B digital device, pur-

suant to Part 15 of the FCC Ru_es. These Hmits are

designed to provide reasonable protection against

liarmhd iutertemnce in a residenlial installation.

This equipment generates, uses, and can radiate

radio fi'equency energy and, if not installed and

used hi accordance with the ]Hstruct]ous, may cause

harm[uH interlerence to radio communications.

Howevm; +liere is no guarantee ilia/ h_ter_erence

will not occur in a pagicular installation. If this

equipment does cause hamffuI hltefference to

radio or television reception, which can be deter-

mined by turning {lie equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of tlie Iollowh_g measures:

1) Reorient or relocate Hie receiving antenna.

2) Increase the separation between the equipment

and receive+:.

3) Connect the equipment into an ouHet on a cha

cuit diflkrcnt from that to which the receiver is

connected.

4) Consult the dealer or an experienced radkjTV

LASER SAFETY

This unit employs a laser. Only a qualified service

person sliouH remove tlie cover or attempt to ser-

vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIEr)

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATEr). DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies witl_

Canadian ICES-003.

Cet appareil num@ique de la classe B est con:

fin°me ii la norme NMB-093 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT. FULLY INSERT.

ATTENTION: POUR t_VITER LES CHOCS

t_LECTRIQUES, INTRODU[RE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER IUSQU'A1J FOND.

- 4 - EN

IBI5

]Forsafeoperationtrodsatisfactoryperformanceof

yourunit,keepthefollowinginmindwhenselecting

aplaceforitsinstallation:

• Shieldit from direct sunlight trod keep it away from

sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilmion for proper

heat dissipation. Do not block the ventilation holes at

the top or bottom of the unit. Do not place the unit

on a carpet because this will block the ventilation

holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving the unit to locations where tempera-

ture differences are extreme.

• Do not h_mdle the power cord with wet hands.

• Do not pull on the power cord when disconnecting

it from zm AC wall outlet. Grasp it by the phJg.

• If by accident, water is spilled on your unit, unphJg

the power cord immediately and take the unit to zm

Authorized Service Center for servicing.

• Do not put your fingers or objects into the

TV/VCR/DVD disc loading tray.

• Do not place anything directly on top of the unit.

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a unit which has

moisture, it may damage the DVD trod the unit.

Therel_re when the condensation occurs inside the

unit, turn the POWER on and allow at least 2 hours

for the unit to dry out.

The following symbols below appear in some head-

ings and notes in this manual, with the following

meanings

[TV/VCR 1

: Description refers to TV/VCR operation (in the

TV/VCR mode).

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of audio CDs

(in the DVD mode).

: Description refers to playback of MP3 discs

(in the DVD mode).

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and ctm be reused. Please dispose of any materials in

accordtmce with your local recycling regulations.

Batteries shoukl never be thrown away or incinerated but disposed of in accordtmce with your local regula-

tions concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other TV/VCR/DVD has the same

serial number as yours. You shoukl record the number and other vital information here and retain this book as

a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 5 - EN

IC29

FA BL E () F ...... ['S'

• IMPORTANT SAFEGUARDS ..... 2

• PRECAUTIONS ................ 4

LOCATION ................... 5

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE .5

WARNING .................... 5

SYMBOLS USED IN THIS

MANUAL ..................... 5

• TABLE OF CONTENTS .......... 6

• FEATURES .................... 7

• OPERATING CONTROLS AND

FUNCTIONS ................... 9

• PREPARATION FOR USE ....... 11

ANTENNA/CABLE

CONNECTION ................ 11

CONNECTING TO FRONT A/V

INPUT JACKS ................ 12

INSTALLING THE BATTERIES . .12

CONNECTING TO A STEREO

AMPLIFIER / RECEIVER EQUIPPED

WITH DIGITAL INPUT JACKS ... 13

CONNECTING TO AN AMPLIFI-

ER/RECEIVER WITH A DOLBY

DIGITAL DECODER (for DVD) . .14

TV./VCR SECTION

• SET UP FOR USE ............. 15

SELECTING THE LANGUAGE . .15

CLOCK SET UP

(AUTO / MANUAL) ............ 15

DAYLIGHT-SAVING TIME ...... 17

CHANNEL SET LIP ............ 18

DELETING (OR ADDING)

CHANNEL(S) ................. 18

• TV OPERATION. .............. 19

WATCHING ATV PROGRAM ...19

DEGAUSSING ................ 19

PICTURE CONTROL ........... 19

CLOSED CAPTION SYSTEM .... 20

V-CHIP SET UP ............... 21

• MTS(l"clulti.Channel Television

sound)SYSTEM ................ 23

CHECKING THE SELECTED

MTS MODE .................. 23

MTS RECORDING/MONITOR

MODE ...................... 23

SELECTING THE MTS SYSTEM .24

• VIDEO CASSETTE ............. 25

• PLAYBACK ................... 26

NORMAL PLAYBACK ......... 26

TRACKING ADJUSTMENT ..... 26

SLOW MOTION .............. 26

STILL PICTURE .............. 26

VERTICAL HOLD CONTROL ...26

• SPECIAL PLAYBACK .......... 27

RENTAL PLAYBACK .......... 27

AUTO REPEAT PLAYBACK ..... 27

• SEARCH ..................... 28

ZERO RETURN ............... 28

PICTURE SEARCH ............ 28

TIME SEARCH ............... 28

INDEX SEARCH .............. 29

• SPECIAL FEATURES .......... 29

REAL TIME TAPE COUNTER ...29

AUTO REWIND-EJECT ........ 29

• RECORDING ................. 30

NORMAL RECORDING ........ 30

SKIPPING UNWANTED SCENES

DURING RECORDING ......... 30

OTR (One Touch Recording) ...... 31

COPYING A VIDEO CASSETTE

/Requires a VCR or camcorder) ...31

• TIMER ...................... 32

AUTOMATIC

TIMER RECORDING .......... 32

TIMER PROGRAM EXTENSION .33

HINTS FOR AUTOMATIC TIMER

RECORDING ................. 34

AUTO RETURN ............... 34

SLEEP TIMER ................ 34

• ON SCREEN DISPLAY ......... 35

• CABLE CHANWEL

DESIGNATIONS ............... 35

DVD SECTION

• ABOUT THE DISCS ............ 36

PLAYABLE DISCS ............ 36

DISC TYPES ................. 36

• PLAYING A DISC .............. 37

BASIC PLAYBACK ............ 37

GENERAL FEATURES ......... 37

DISC MENU ................. 37

TITLE MENU ................. 37

RESUME .................... 38

PAUSE ...................... 38

STEP BY STEP PLAYBACK ..... 38

FAST FORWARD/REVERSE

SEARCH .................... 38

SLOW FORWARD / SLOW

REVERSE .................... 38

ZOOM ...................... 38

• SEARCH FUNCTION. .......... 39

TRACK SEARCH ............. 39

TITLE / CHAPTER SEARCH .... 39

TIME SEARCH ............... 39

MARKER SETUP SCREEN ...... 39

• SPECIAL PLAYBACK FUNCTION ...40

REPEAT ..................... 40

PROGRAM ................... 40

RANDOM PLAYBACK ......... 40

• PLAYING AN MP3 DISC ........ 41

MP3 PLAYBACK .............. 41

REPEAT ..................... 41

PROGRAM ................... 41

RANDOM PLAYBACK ......... 41

• CHANGING THE SETTINGS .... 42

SUBTITLE LANGUAGE ........ 42

AUDIO LANGUAGE ........... 42

STEREO SOUND MODE ........ 42

CAMERA ANGLE ............. 42

BLACK LEVEL SETTING ....... 42

VIRTUAL SURROUND ......... 42

• THE ON-SCREEN INFORMATION...43

• CHANGING THE DVD SETUP

ITEMS ....................... 44

LANGUAGE SETTING ......... 44

DISPLAY SETTING ............ 45

AUDIO SETTINGS ............ 45

PARENTAL CONTROL ......... 46

INITIARIZE .................. 46

• TROUBLESHOOTING GUIDE ...47

• MAINTENANCE ............... 50

DISC HANDLING ............. 50

• SPECIFICATIONS ............. 51

• ESPAN'OL .................... 52

• WARRANTY ........... Back Cover

- 6 - EN

IC29

[ TV/VCR Mode 1

® HbFi system=The Hi-Fi stereo recording/playback

system offers you excellent sound quality.

® Rotary 4-head Record/Playback System=Four

video heads ensme e×ceHent picture quality and

special effects playback.

® Inde× Seareh=Fast-tbrwards to start of t]ext recording.

® Slow Motion=View recorded material at slower

than normal speed.

* Infrared remote controm

® TriHnguN on screen TV/VCR setup display in

English or Spanish or French

®Rea] time counter=This shows flle elapsed record-

mg or phyback time hi hours, minutes and sec-

onds. The '-" indication will appear when the tape

is rewound fulther than the tape counter position

0:00:00'2

® 181 channel capability TV tuner with direct sta-

tion aecess=(A converter may be necessary to

view scrambled cable channels0

* Auto Chock Setting=AHows you to set the dock

ftmction t_'om a PBS (Public Broadcast Station).

® Closed caption system=You may view spedaHy

Babeled (cc) TV programs, movies, news, prere-

corded tapes, etc. with either a diak)gue caption or

text display added to the program.

® Auto power on and off system=Automatically

rams on the unit when you insert a cassette, rams

off after auto-rewind and ejects when the begin-

ning of the tape is reached.

® Auto rewind when the end of a tape is

reached=This ttmction doesn't occm: when using

* Smooth mode change=TV/VCR mode and DVD

mode automatically changes.

® 2 Step picture search operation=You can view

video material at a high speed or super high speed

in either a forwaN or reverse direction M LP and

SLP mode. For SP mode only high speed applies.

® Three different Nayback tape speeds : SP/LP/SLP

® Two different recording tape speeds : SP/SLP

® Auto Head Cmeaner=AutomaticaHy deans video

heads when you meet{ o17remove a cassette.

* Zero Return=The tape returns to the counter posi-

tion of 0:00:00 by rewinding or [itst forwarding.

® StiH="Freezes" the picture at any time, for close

viewing of a partictdar scene.

® Digital Auto Tracking (DTN)=AutomaticaHy

adjusts tracking for each tape you play.

* Rental play mode=Improves playback picture

quality h'om worn tapes, such as renta_ tapes.

® Auto repeat=Allows you to repeat the playing of a

tape indefinitely without pressing the PLAY button.

* Time search=Lets you set the unit to advance the

tape by entering the desired playback time you want

to skip.

® OTR (One Touch Recording)=l[i]stant timed

recording from 30 to 480 minutes is possible at the

push of the REC/OTR button.

® 1 Year, 8 events (including Daimyand Weekly

Timer Ftecording)=The built-in timer allows you to

record tup to 8 programs at different times on dif-

ferent channels up to I year in advance. The Dally

timer allows recordings to be made of daily broad-

casts and the WeeMy thner allows recording to be

made once a week up to the end of the tape.

® Auto return=After thner recording is finished, the

unit call return to the beginning of the recording.

® Sleep timer=Agk)ws you to have the uHit automati-

cally turn off at a desired time.

* Timer Program Exteneion=AHows you to shift the

time schedtde for automatic timer recordMg.

® V-CHJP=EnaNes parents to prevent their children

from watching inappropriate material on TV.

- 7 - EN

IC29

[ DVD Mode ]

®Dolby DigRa_ sound

This uait can omput an audio signal from die digi-

tal audio outpm jack.

o StiH/faat/smow/atep ptaybaek

Various playback modes arc available including still

picture, t?__stforward/reverse, slow motion and flame

by [_ame.

®Random pmayback for audio CD and MP3

This unit can shuttle die order ot tracks to play diem

in random ordm:

®Program pmayback for audio CD and MP3

You can program {lie order of m[cks {o play in any

desired order_

®DVD menus in a desired manguage

You can display DVD menus hi a desired Banguage,

if available on a DVD.

®Screen saver/Auto power-off functions

The screen saver program starts when d3ere is no

iaput from the unit [br 5 minutes h_ die stop mode.

When die screen has been in opporaqon for 15 min-

u{es, {lie power will automatically {urn off.

®Subtitmes in a desired manguage

You can sdect a desired language tot die display

is available on a DVD disc.

®Semecting a camera angJe

You can select rite desired camera angle, if a DVD

disc conlains sequences recorded from different

aagles.

®Choices for audio Banguage and sound mode

You can select dle desired audio language and sound

mode, if different languages and modes are available

on a DVD disc.

®ParentN lock

You can set {lie control level to Bimit playback of

DVD discs which may aot be suitable [br diildren.

®Automatic detection of discs

Thi s unit aurora ad call y detect s it {lie 1oaded d isc is a

DVD, audk! CD or MP3.

®Playback MP3 disc

You can play back CD, CD-R or CD-RW discs widi

MP3 files stored on diem.

®On-screen disney

hi%tree{ion about die current opera{ion can be dis-

played on a TV screen, allowing you to confirm dte

currendy active functions (such as program phy_

back), on die TV screen ushlg die remo{e control

®Search

Chapter search / Tide search / Track search / Time

o Repeat

Chapter / Tide / Track / Group / AH / A-B

o Marker

Tlie locadon on a specific DVD disc designa{ed by

die user to be accessed h_/er.

®Resume Play

User can return to die k/caion at which play was

stopped.

®Virtuam Surround (for DVD, CD, MP3 only)

Creates a surround sound effect.

®Bit rate indication

o DRC (Dynamic range controm)

You can limi{ die range ot {he difference between

{lie loudest and so{test sounds.

®ZOO_,{

AUows the image displayed on d3eTV to be magni-

fied. (f)VD only)

NOTE:

®We do not recommend die use (if universal remo{e controls. No{ all (if die tunctkms (if dfis unit will be con-

{roiled wifii the universal remote control.

[f you decide to use a universal remote conlroi widl dtis uniL please be aware dmt die code aumber given

may no{ operate diis unit. In tllis case, please call {lie manufacturer ot [lie universal remo{e control.

- 8 - EN

IC29

(}PI,RA I ING C(}NTRO[S AND I [ N(,] I(}NS

-TV/VCR/DVD FRONT PANEL - [Fig.l]

2 343 5 6

II TV/VCR buttons

7 8 910 11 12 13144 15 161718 19 20 21

iooooooo_ooo

- REMOTE CONTROL - [Fig. 2]

(DVD)3

OV/VCR)

PICTURE SLEEP

SPEED ORESET ZOOM MUTE

C£)

D_SPLAy ............... •

3 (DVD)

(TV/VCR)

1. POWER Button ITV/VCRRI5/ DVDR371

Press to turn the power on trod off.

2.VOLUME (VOL) A/V Buttons

Press to control the volume level.

3.SKIP Buttons (for DVD)IR381

Press once to skip chapters or tracks.

Press and hold to change forward or reverse play-

back speed.

4. PLAY Button [TV/VCRR26/ DVD R37]

Begins playback of the disc or video tape.

5. STOP Button ITV/VCRR26/ DVD R371

Stops operation of the disc. (or front panel)

Stops operation of the disc or video tape.

(remote control)

6. OPEN/CLOSE Button IDVDR371

Press to open disc tray to insert or remove a disc.

7. Disc loading tray

8. DVD Indicator

Illuminates during DVD mode.

9. SELECT Button

Press to ch_mge to TV/VCR mode, A/V input or

DVD mode.

10.TV/VCR Indicator

Illuminates during TV/VCR mode.

11. CHANNEL (CH.) A/V Buttons

Press to select memorized channel.

12. Recording Indicator

Flashes during recording. Illuminates in the Stand-

by mode for Timer Recording.

13. REC/OTR Button (Front Panel) [TV/VCRP30,311

Press to start manual recording. Press repeatedly

to start One Touch Recording.

RECORD Button (Remote Control) ITV/VCRP.30l

Press to begin mtmual recording.

14. REW Button (for TVNCR) ITV/VCRP.26]

Press to rewind the tape, or to view the picture

rapidly in reverse during playback mode. (Rewind

Search)

15. F.FWD Button (for TVNCR) ITV/VCRP.261

Press to rapidly advance the tape, or to view the

picture rapidly in forward during playback mode.

(Forward Search)

16. STOP/EJECT Button [TV/VCRP.281

Press to stop the tape movement. Press in the Stop

mode to remove tape from the unit.

17. Remote sensor window

18. HEADPHONE Jack

To connect headphone (not supplied) for personal

listening.

- 9 - EN

IC29

-TV/VCR/DVD REAR PANEL- [Fig.3]

19. VIDEO input Jack

Connect to the video output jack of a video

camera, VCR or video game system.

20. AUDIO I.JR input Jacks

Connect to the audio output jacks of a video

camera, VCR or video game system.

21. Cassette compartment

22. PICTURE Button

Press to adjust the picture.

23. Number Buttons

TV Mode:lP]51

Press two digits to directly access the desired

channel.

Remember to press a "0" before a single digit

charnel.

+100 Button-

Press to select cable ch_umels which are equal or

greater than number 100.

DVD Mode:

Press to enter the desired number.

+'10 Button-

Press to enter the desired numbers which are

equal or greater than number 10.

24. PAUSE Button [TV/VCR R26 / DVD R38]

Pauses the disc or tape movement.

25. SPEED Button [TV/VCRP.301

Press to choose the desired recording speed:

SP/SLP.

26. C.RESET Button ITV/VCR_281

Press to reset cotmter to 0:00:00.

Press to cancel a setting of timer program. (See

page 33.)

27. DISPLAY Button

TV/VCR Mode:

Display the counter or the current channel number

and current time on the TV screen.

DVD Mode:lR431

Displays the current status on the TV screen for

checking purposes.

28. SETUP Button [TV/VCRR15][DVDP.44-46]

Press to enter or exit the TV menu or DVD setup

mode.

29. TITLE Button [DVDP.371

Displays the title menu.

30. CLEAR Button

Resets a setting.

31. MODE Button IDVDP.41]

Activates program playback or random playback mode.

32. SEARCH MODE Button [DVDR39]

Press to locate a desired point on a DVD disc.

33. AUDIO Button [DVDR421

Press to select a desired audio language or sound

mode.

34. SUBTITLE Button IDVDP.421

Press to select a desired subtitle language.

35. REPEAT Button IDVDP.421

Repeats playback of the current disc, title, chapter,

group or track.

36. ANGLE Button (DVD mode) IDVDR421

Press to change the camera tingle to see the

sequence being played back from a different angle.

37. A-B REPEAT Button [DVDR40]

Repeats playback of a selected section.

38. RETURN Button

Returns to the previous operation in the DVD

setup mode.

39. ENTER Button

Press to accept a setting.

40. Arrow Buttons

TV/VCR Mode:

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the

display on a TV semen.

41. DISC MENU Button [DVDR37]

Displays the menus in the DVD.

42. ZOOM Button [DVDP.38]

Enlarges part of a DVD-reproduced image.

43. MUTE Button

Mutes the sotmd. Press it again to resume sotmd.

44. SLEEP Button [TV/VCRR341

Sets the Sleep Timer.

10 EN

IC29

45. SELECT Button

Press to switch TV/VCR and DVD mode. You

can see the mode (TV/VCR or DVD) on the front

panel indicator.

46. ANT. in Jack

Connect to an antenna, cable system, or satellite

system.

47. Power cord

Connect to a sttmdard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect

to a standard AC outlet.

48. COAXIAL digital audio out Jack (DVD, CD, MP3

Audio only)

Connect to the digital input of an external ampli-

tier or receiver.

PR EPA RATI ()N FOR {_SE

Satellite Box or

Cable Box (Not supplied)

,_ From Cable System or

_ Satellite Dish

From Cable

System

75-ohm

Coaxial

Cable

(Not sup-

plied)

75-ohm Coaxial'_

Cable (Not or [

,, supphed) =_ni,ji_

VHF/UHF Antenna

(Not supplied)

VHF Antenna (Not supplied)

or VHF/UHF _

/Combiner -"

(Not supplied)

or Flat twin-lead cable

UHF Antenna

(Not supplied)

[Fig. 41

WTI'i W I' SL] J(_A77_ A/<7"7_ _,,,>,,AS

In some areas it will be necessary to use tm outdoor

alltellna.

4AL_:LL <07_,W/:'k*7"7<;JU

ESCEAi_H{LE]_{?OX

Use this connection if your cable system connects

directly to your unit without a conveller box.

By using this connection you can:

1) Use the unit remote to select channels.

2) Program one or more unscrambled channels for

Automatic Timer Recording.

NOTE: This unit will ONLY record and view the

same channel.

<;4BLElii'H' _!</©M,VEAI'T],TU

/)ES(7<_Ak4_<,Ek__0£ 0]?SATE ,LH'/:'

If your cable service supplies you with a convefler

box or if you use a satellite system, you can use the

basic connection shown in the ilhJstration.

By using this connection you ctm also record scram-

bled channels. However, channel selection must be

made with the converter box or satellite box. This

means that channels cannot be changed using the

Remote Control. Unattended timer recording is limit-

ed to one chtmnel at a time.

Antenna/Cable Connections

Continued on the Next Page.

11 EN

IC29

TO RECORD A SCRAMBLED/UNSCRAM-

BLED CHANNEL

1. Set the unit channel sdector to the output channel

of the CaNe Convelter Box or Sa/eHite Box. (Ex.

CH3)

2,Select the channel to record with your Cable

Convmler Box or Satellite Box,

Note to CATV system installer:

This reminder is provided to call the CATV sys-

tem installer's attention to Article 820-40 of the

NEC that provides guidelines for proper ground-

ing and in particular, specifies that the cable

ground shall be connected to the grounding sys-

tem of the building as close to the point of cable

entry as practical.

1)Open the battery comparlment cover by pressing

the cover on the remote unit in the direction of the

arrow.

2)Inserl 2 "AA" penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3)Replace the cover.

When you watch a program recorded on _m another

source (VCR, video camera, video game system), use

the audio/video input jacks on the front of the unit.

Connect the audio/video output jacks of another

source to the AUDIO L/R and VIDEO jacks of this

unit.

Then press the CHANNEL button • or • until

"AUX" appears on the TV screen.

NOTE:

,, When you connect a monaural VCR (another

source) to this unit, connect the Audio output jack

of the monaural VCR 0mother source) to the

AUDIO L jack of this unit. The audio will output

in both L and R ch_mnel equally.

To the audio

output jacks

Another source] i:

u0,o ,0oo

/r{_ _ canes

(not supplied)

etc.

To ihe video /Q

output jack _-_:- _=_::J

EADPHONE VIDEO L AUDIO R

[Front of the

TV/VC R/DVD]

[Fig. S]

12 EN

IC29

Use an audio coaxial digital cable available at retail stores for the audio connection.

Amplifier/receiver equipped with digital

To COAXIAL DIGITAL

AUDIO INPUT jack

DIGITAL AUDIO OUT COAXIAL

NOTE: DVD, CD, MP3 audio only

[Fig. 61

NOTES:

• A 5.1 channel Dolby Digital surround format cannot be recorded as digital sound.

,, Be sure to turn off the power to all components in the system before connecting them together.

,, Refer to the Owner's Manuals for the components to be connected to the unit.

,, Set Dolby Digital to OFF for audio output in the setup mode when using this digital audio connection.

Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

,, This will allow 2 channel DVD sound to be listened to on the amplifier/receiver.

- 13 - EN

IC29

TousethisunittoplayaDVDdiscina5.1channelDolbyDigitalsurroundformat,theunitctmoutputa

DOLBYDIGITALDatastreamfromitsCOAXIALdigitalaudiooutjack.ByhookingtheunituptoaDolby

Digitaldecoder,youcanenjoyhigh-qualitysurroundsoundasenjoyedinmovietheaters.

Useaudiocoaxialdigitalcablesavailableatretailstoresfortheaudioconnection.

[Fig. 7]

NOTES:

,, Be sure to turn off the power to all components in the system before connecting them together.

,, Refer to the Owner's Mtmuals for the components to be connected to the unit.

,, If connected to receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the

setup mode. (See page 45 to set DOLBY DIGITAL to ON.)

,, Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio out-

put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also

damage the speakers.

,, Only DVD, CD, MP3 sound is available using this jack.

Manufactured under license from Dolby Laboratories, ,D01by" and the d0uble2D symbol are

trademarks of Dolby Laboratories.

- 14 - EN

IC29

........{JPFOR USh

[TV/VCRI

>!.g the / C{gV[3 {: ;/:_!. co'{3

PlugtheTV/VCR/DVD powercordintoa

st_mdardAC outlet.

NOTE:

If rely digits appear in the comer of the

screen, press the POWER button without unplug-

ging the power cord.

Make sure ...

,, Press tfie SELECT bu,on to select TV/VCR mode or

make sure TV/VCR ligfitson.

,, Press tfie POWER bullon to turn on the unit.

ITV/VCRI

The TV/VCR/DVD clock must be set correctly before

VCR timer recording is possible. It is suggested tfiat

the clock be set mtmually when first setting up file

unit, then set the auto clock setting to [ONI which will

periodically correct the setting if necessary.

NOTE: If you cannot receive a station with time

signals, auto clock setting cannot be performed. Use

mzmual setting only.

", j % , ,I I'< ( %;"'¢ _,Y

Make sure ...

,, The unit is turned on.

_',"S÷{÷c L,A{_G(.AG!/

Press the SETUP button on the

TVNCR SETI3p -

remote control, r,w__o_,_

SETTINGCLOCk<

GIqANNEL SET UP

Press the Arrow button • or • to .... '......

V C]q_p SET If'

LANGUAGE ENGUSH ....

point to "LANGUAGE". ........ _o_3 ....

ZERO RETI3RN

T]ME SEARGH

NOTE: This ffmction effects only ....... _o.

the language on the screen menu _mdnot the audio

source.

3 fb,,>eC _,..,,,s_,...........::_._,,,_.....

Select "ENGLISH", "ESPAI'qOL"= Spanish or

"FRAN(_AIS"= French using the ENTER button.

DATE May 6tfi, 2004

SETTING TIME 5:40PM

Press the Arrow button • or • to

point to "SETTING CLOCK".

Then press the ENTER button.

S<ec S£!.771'q{c_CLOCK

Press the SETUP button on the I ............

TIMER P_OGRAMMING

remote control. ,- _r,_o_o_

GHANNEL SET IJp

USER'S S_T UP

V GH_P SET OP

LANGDAG E [EN@L_SH]

GAPT_OIq [©FF]

ZERO RETL_bl

rIMSSEARCH

Dff)_x SEARCH

................................................................................................................................................................................................................................................................................................................................Press the Arrow button • or • to

_ l£ix be La -_gt;age/s_ode point to "MANUAL CLOCK

Press the SETUP button on the remote control to SET".

return to TV mode. Then press the ENTER button.

NOTE: If for some reason the menu is in Spanish or

French, press the SETUP button on the remote con-

trol, press the Arrow button • or • to point to

"IDIOMA [ESPAIqOLI" or "LANGAGE

[FRAN(_AISI", then press the ENTER button, then

press the SETUP button on the remote control.

Ii_ SETTING CLOCK

AUTO CLOCK [ON]

AtrlO CLOCK GH SEARCH

AUTO CkOCK CH [ 02 ]

MANUAL CLOCK S_T

o s T lOaF]

PresstheArrow button• or• ..............

untilyourdesiredmonthappears.............

(Example:May ---->05) .....

Then press the Arrow button I_. ..........

(Or press the Arrow button _1 to

go back one step.)

Press the Arrow button • or • .............

until your desired (lay appears ....... #.....

(Example: 6tfi --+ 06) .....:0_:

Then press the Arrow button I_. ..........

- 15 - EN

IC29

Press the Arrow button • or • ............

until your desired year appears. ;

(Example: 2004) ..........

Then press tile Arrow button li_.

Press the Arrow button • or • ............

until your desired hour appears. 0...........

(Example: 5. PM) .........

p_4 ......

Then press tile Arrow button li_. .....

Press tile Arrow button • or • ............

until tile desired minute appears. 0...........

(Example: 40) .... u.....

0s 40 PM

_' Ss't the cock ...... )

Press the SETUP button on the

remote control.

Although seconds are not displayed,

they begin counting from 00 when

you press tile SETUP button oil tile

remote control. Use this feature to synchronize tile

clock with the correct time.

NOTE:

When unplugging tile AC cord or if there is a power

failure for more than 3 seconds, you may have to

reset tile clock.

If you w_mt to change tile clock,

l)Follow steps 111to 121.

2)Select where you want to chmlge using tile Arrow

button li_.

3)Enter correct numbers using tile Arrow button •

or •.

4)Press tile SETUP button oil tile remote control to

stall tile clock.

PLEASE NOTE:

If there is no local PBS (Public Broadcast Station) in

yotlr area or oil yotlr cable system, select "AUTO

CLOCK" and press the ENTER button to turn IOFFI

this function. Then you can m_mually adjust the

clock.

A UTV?£<,:I7£(i _'<'£0 7£ S£TTSAG

Make sure ...

,, Tile trait is ttirned oil.

,, Confirm tile unit is receiving a RF (Radio

Frequency) signal from either an antenna or cable

system connection rising tile ANT. terminal oil tile

rear of tile unit.

NOTE:

* If a cable conveller box is being used, make sure it

is powered oil.

,, You must use tile TV/VCR/DVD remote control to

perform tile clock setting procedure.

,, If tile unit is connected directly to a cable converter

box or satellite box, tile local PBS station must be

selected oil tile cable box itself and tile unit must

be set to tile output channel of tile cable converter

box or satellite box (usually chmmel 3 or 4), to be

able to set up or correct tile clock automatically.

Press tile SETUP button oil tile

TWVCR S_TUP -

remote control. _ p_o_s_

S_TTING CLOCK

CbIANN_L S_T/fp

Press tile Arrow button • or • to .... .......

V-Obl{p 8ET LIp

select "SETTING CLOCK". ........ _.......

OA PT{ON [OFF]

ZERO RETURN

Press tile ENTER button to enter ...... _o_

{NO_XS_ARCH

"SETTING CLOCK" menu.

2 ,,<:.<">£_,.+,Tc,_Ct.OOK to O/,/] ............ ]

Press the Arrow button li_ until

AUTO CLOCK [ON]

AUTO °LOOK OH S EAROld

'_ AUTO OLOCK ° H {0_]

"AUTO CLOCK ION] appears. ............

Press tile Arrow btitton • to select _,_o<o0_

"AUTO CLOCK CH SEARCH".

AUtO °LOCi< [ON]

Press tile ENTER button. . .................

AUTO CLOCK @t [ O2]

MAN/DiL °LOCK SET

• Tile unit is now searching for tile o_ _om

station which contains the auto

clock signal. Tile search for a sig-

nal may take up to 20

seconds per channel.

• "_ _" appears at tile lower left of .................

tile screen when tile search has ......

ended.

• Auto Clock station(s)- write

down tile number(s) that appear

oil tile screen. Tilese are tile auto

clock station(s) in your area. See step [41 on page

17.

,, If no number(s) appear oil tile TV screen, there are

no stations in your area which contain tile Auto

Clock signal. Auto Clock Setting is not possible.

Please use Manual Clock Setting oil page 15.

Press tile SETUP button to exit tile screen.

16 EN

IC29

NOTE:DuringAutoClockCHSearch,thepicture

maybedistorted,thisisnormal.

,s sf _

Press the SETUP button on the remote control.

Press the Arrow button • or • to

select "SETTING CLOCK".

Press the ENTER button to enter

"SETTING CLOCK" menu.

Press the Arrow button • to select

"AUTO CLOCK CH".

Press the ENTER button or the

Arrow button _ or I_ until you

locate Auto Clock Set station num-

ber. See step [31 on page 16.

Press the SETUP button to exit the

screen.

TV/VCR SETUP -

TIMER PROGRAMMING

SETTING OLOO_<

CHANNEL SET UP

USER'S SET UP

V CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION /OFF]

ZERO RETURN

T_MESEARCH

INDEX SEARCH

i SETTING CLO@<

AUTO OLOCK [ON]

AUTO CLOCK CH SEAROH

AUTO OLOCKOH [ 45]

MANUAL CLOCK SET

DST [OFF]

Once the unit is turned off, it will periodically check

and set the correct (late and time.

[TV/VCR 1

Select this feature and the unit's clock automatically

will advance one hour in April, then reverse one hour

in October.

When Daylight-Saving Time is ON, the clock will

change automatically as tk)llows:

• First Sundayof April : At 2 AM the clock imme-

diately chtmges to 3 AM. Any timer programming

you have set to occur between 2 AM and 3AM

will not record.

,, Last Sunday of October : At 2 AM the clock

immediately chtmges to 1AM.

Make sure ...

• The unit is turned on.

Seect 8[i!,TT tG CLOCK

Press the SETUP button on the ...........

T_MER PR_RAMMING

remote control. . _r_NGo_oo_<

O_ANNEL SET UP

USER'S SET UP

v oHip SET UP

Press the Arrow button • or • to _....... _.......

GAPTI©N [OFF]

point to "SETTING CLOCK". ,,_.........._Ro,

IN{)_X S_AROH

Then press the ENTER button.

Press the Arrow button • or • to ( _,,,_o_oo_

point to "D.S.T.". [ ........ _o_

AUTO GLOGK GH SEARGH

Then press the ENTER button until .......... _0_

MANUAL CLOOK S_

[ONI appears. ,. ......... _oN_.........

Press the SETUP button on the remote control to

return to TV mode.

Repeat steps [ll to [21, select [OFFI using the

ENTER button.

- 17 - EN

IC29

[TV/VCR]

You can program the tuner to memorize till the cfian-

nels you receive in your area.

NOTE: Cfitumel memory programming is NOT

needed wfien conuected to a cable box or satellite

box. Just select the TV/VCR/DVD channel to tile

output cfitmnel of tile cable box or satellite box (Ex

CH3), then select tile cfitmnel to be viewed on tile

Cable Box or Satellite Box.

Make sure ...

,, The unit is turned on.

Seec 08_4A58_,_ELSET UP'

Press tile SETUP button on tile ..........

remote control, sErnNaCLOCK

i_ CHANNEL SET UP

USER'S SET UP

Press tile Arrow button • or • to _°"_'°_

LANGUAGE [ENGUSH]

CAPTION [OFF]

point to "CHANNEL SET UP". ..........

TIME SEARCH

_NDE×SEAROH

Then press tile ENTER button.

2 Begy_ a_ o ch pl'og}:api'_v, /g

Press tile Arrow button • or • to o._,,_Fo_

point to "AUTO CH PROGRAM ............. (o_,_

MING". .................

Then press tile ENTER button.

Tile tuner scans mid memorizes all

tile active channels in your area.

Tile tuner stops on tile lowest memorized cfimmel.

,, When AUTO CH PROGRAMMING is actiw_ted

wfiere there is no TV signal input, "NO TV SIG-

NALS" will appear on the display after the com-

pletion of tile channel sctmning.

,, Tile unit may memorize TV cfiamlels as CATV

chtmnels if reception conditions are poor. If this

happens, check tile antemla connection and try tile

AUTO CH PROGRAMMING again, or wait until

reception conditions are better and then try it again.

ITV/VCRI

Tile channels you no longer receive or seldom watch

can be deleted from tile memory. (Of course, you

ctm add tile deleted channel into tile memory again.)

Seect C},_A_@SEL SEf UP

Press the SETUP button on the .........

TIMER pFtOGI:tAM M_N@

remote control, s_m_cuo_

CHANNEL SET UP

USER'S SET UP

Press tile Arrow button • or • to _°"'_'°_

LAN@UAGE [_NGUSH]

CAPTION /OFF]

point to "CHANNEL SET UP". ..........

TIME SEARCH

Then press tile ENTER button. '...... _°"

Press tlle Arrow button • or • to ........... ;o_,_>

point to "ADD/DELETE CH". .................

Press tile ENTER button.

Press tile Arrow button • or •

until your desired channel number

appears. (You can also use tile os

number buttons or the CHANNEL

ADD / DELFTE

• or • button to enter it)

(Example: CH8)

• You must precede single-digit cfiannel numbers

with a zero (Example: 02 ... 09).

• Wfien selecting cable cfitmnels which are higher

tfitm 99, press the +100 button first, then press the

last two digits. (Example: to select cfiannel 125,

first press tile +1 O0 button then press "2" and "5").

_ Deee (el' add} rof;¢ { y_e) '_e'_¢o y

Press tile ENTER button. Tile cfiamlel number

cfimlges to light red. Tile channel is deleted from

memory.

,, To delete another channel, repeat steps [3] to I41.

• If you press tile ENTER button again, tile channel

is memorized again.

Added channel: Light blue.

Deleted channel: Light red.

Press tile SETUP button on tile remote control to

return to TV mode.

NOTE: To confirm that cfitmnel(s) has been deleted

or added, press the CHANNEL • or • button.

18 EN

IC29

FV .... i" T()PLRATI .)N

[TV/VCR I

/'u _'_,x_ the

Press the POWER button to tuna on the unit.

Press the CHANNEL button • or • to select your

desired charnel number or press the number on the

remote control.

Note for using the Number button on the remote

control:

• You must precede single-digit channel numbers

with a zero (For example: 02, 03, 04 and so on).

• When selecting cable channels which are higher

than 99, press +100 first, then press the last two

digits. (Example: to select chamael 125, first press

"+100" then press "2" and "5").

Remember: If the unit is connected to a cable box or

satellite box, it must be on CH3 or CH4, then the

chamael to be viewed must be selected on the cable

box or satellite box.

Press the VOLUME button A or V

to adjust the volume.

VO_OME 2O

lllllm....

NOTES:

,, If you press the CHANNEL button • or • in the

DVD mode, you can chmage the TV channels.

Even if you turn off the unit in the DVD mode,

when you turn it on again, it will go into the

TV/VCR mode.

[TV/VCR I

Magnetism from nearby appliances and unshielded

speaker systems might affect the color of the TV pic-

ture.

If this happens, move this unit away from the appli-

mace. [f the color is still not con'ect, unplug the power

cord, then plug it in again 30 minutes late_:

ITV/VCRI

The unit's picture controls -BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS - are

preset to factory specifications. Although they are

usually the best, you may need to make some further

adjustments for your individual preference.

NOTES:

,, Procedures must be followed within 5 seconds or

the Picture Control mode will be cancelled.

,, When setting the Picture Control, the Game mode

will be cancelled.

Make sure ...

• The unit is tumed on.

:,ee. P:;*_URE .,,;-,_

Press the PICTURE button on the remote control.

Press the Arrow button • or • until desired control

is displayed.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

_!i_Adu_: the s c_. e con /'o

Press the Arrow button "_l or _ to adjust to your

desired level.

AHxm Button _ Arro_ Button

[O d_cFt'_tS{2 {O illClt?_tS_*

BRIGHT brighl m,s_, brightm, ss

Io decre lse _o ilcrease

CONTRAST

COlllraS[ C()[l_raS_

COLOR _o pale _o brilliant

TINT _o purple _ogreen

SHAPNESS Io soft {o clear

• If there is a power failure of any kind, the unit will

remember the setting.

- 19 - EN

IC29

[TV/VCR]

You can view specially labeled (cc) TV programs,

movies, news and pre-recorded tapes with either a

dialogue caption or text display.

CAPTION mode: By choosing the caption mode, you

can watch dramas, movies trod news while captioning

the dialogues trodthe contents of news.

TEXT mode: By choosing the text mode, you can

watch half screen text information if you wtmt.

1-2: You may get these captious or text information

by selecting either "1" or "2". Caption "2" is used,

usually for a second language if available.

NOTE:

Not all programs are broadcast with closed captions.

Your unit is designed to provkle error free closed

captions from high quality mltemm, cable and VCR

signals. Conversely, poor quality signals are likely to

result in caption errors or no captions at all. Common

signal conditions which may cause captions errors

are listed below:

,, Automobile ignition noise

,, Electric motor brash noise

,, Weak snowy reception on TV screen

" Multiplex signal reception displaying picture

ghosts or airplane flutter.

,, Playback of poorly recorded or worn VCR tapes.

NOTE:

If the unit displays a black box on

the TV screen, this metros that the

unit is set to the TEXT mode. To

clear screen, select [CAPTION I1,

[CAPTION21 or [OFFI.

Make sure ...

,, The unit is turned on.

2 S÷®ctyou_des ed cas s '_!_'u

Press the ENTER button until your

. TV[VG _ SETUp.

desired caption menu appears. _.........

CHANNEL S_T UP

USER'S SET UP

([CAPTION 11, [CAPTION21, v..........

LAN@UAG_ [EN_U ¢t]

[TEXTI 1 [TEXT21) .......... ,........ ,OF z_Ro R+TU!+I,_

TIME SEA_GH

_ND_× S_A_CH

..';i#Ext the ca/cy/:on _s!_t _sgmode

Press the SETUP button on the remote control to

return to TV mode.

<', A:(EL }L75_I'£ {,,_,_',f _','

Repeat steps Ill to 121,select [OFFI using the

ENTER button. Press the SETUP button on the

remote control to return to TV mode.

}7</<N

The On-Screen Display will disappear after 5 sec-

onds.

,, It will also disappear when the MUTE button is

pressed and when the PAUSE button is pressed

while recording.

,, If there is a power failure of _my kind, the unit will

retain its memory for this feature.

- 20- EN

IC29

Page is loading ...

Sylvania SRCD427P Owner's manual

Brand: Sylvania

Model: SRCD427P

Category: Cassette players

Type: Owner's manual

Download PDF

report

Sylvania SRCD427P Owner's manual

Sylvania SRCD427P Owner's manual

Related papers

Other documents