Philips 30PW850H Owner's manual

Brand: Philips

Model: 30PW850H

Category: LCD TVs

Type: Owner's manual

Directions for Use

Need help?

Call us!

Philipsrepresentativesare ready to help you with any ques-

tions about your new product. We can guide you through

Connections,First-timeSetup, or any of the Features.

We want you to start enjoyingyour new product right away_.

CALL US BEFORE YOU CONSIDER

RETUNING THE PRODUCT.

1-800-531-0039

Visit us on the web at

w_r_.philips.com

3121 235 20991

Model No.:

Serial No.:

Once your PHILIPS purchase is registered, you're eligible to receive all the privileges

of owning a PHILIPS product. So complete and return the Warranty Registration

Card enclosed with your purchase at once. And take advantage of these important benefits.

Congratulations on your purchase,

and welcome to the "family!"

PHILIPS

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS. You've selected one of the best-built, best-backed products

today. And we'll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive war-

_nties and outstanding service networks in the industry.

What's more, your purchase guarantees you'll receive all the information and special offers for which you quali-

fy, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.

All of this isour way of sayingwelcome_and thanks for investing in a PHILIPS product.

Sincerely,

Lawrence J. Blanford

President and Chief Executive Officer

P.S. Remember, to get the most from your

PHILIPS product, you must return your

Warranty Registration Card within 10

days. So please mail it to us right now!

Know these

safetysymbols

_L This "bolt of lightning" indicates uninsulated material within your unit may cause an elec-

trical shock, For the safety of everyone in your household, please do not remove product cor-

m'The "exclamation point" calls attention to features for which you should read the

enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENTFIRE OR SHOCK HAZARD, DO NOT EXPOSETHIS EQUiP-

MENT TO RAiN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert,

ATTENTION: Pour _viter les chocs _lectriques, introduire la lame la plus large de lafiche dans

la borne correspondante de la prise et pousser jusqu'au fond,

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this appara/us near water.

6. Clean only with a dry cloth. 17.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heal regis-

ters, stoves, or other apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and third ground-

ing prong. The wide blade or third prong are provided for your

safety. When the provided plug does not fit into your outlet, con- 18.

suit an electrician for replacement of the obsolete outlet.

10. Protect tbe power cord from being walked on or pinched particu- 19.

larly at plugs, convenience receptacles, and the point where they

exit fi-om the apparatus. 20.

11. Only use attachments/accessories specified by the manufacturer.

12. _ Use only with a cart, stand, tripod, bracket, or table

_ specified by the manufacturer, or sold with the app-

aratus. When a carl is used, use caution when moving

the cart/- apparatus combination to avoid injury from tip-over.

13. Unplug this apparalus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled 21.

or objects have fallen into apparatus, the apparatus has been

exposed to rain or moisture, does not opera/e normally, or has

been dropped. 22.

15. This product may contain lead and mercury. Disposal of these

materials may be regula/ed due to environmental considerations.

For disposal or recycling information, please contact your local

authorities or the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or

D. _le appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties

of its cabinet design.

• Do not compromise these design standards by applying exces-

sive pull force to the front, or top, of the cabinet which could ulti-

mately overturn the product.

• Also, do not endanger yourself, or children, by placing electron-

ic equipment/toys on the top of the cabinet. Such items could

unsuspectingly fall fiom the top of the set and cause product dam-

age and/or personal injury.

Wall or Ceiling Mounting - The appliance should be moun/ed to

a wall or ceiling only as recommended by the manufacturer.

Power Lines -An outdoor antenna should be located away from

power lines.

Outdoor Antenna Grounding - If an outside antenna is connect-

ed to the receiver, be sure the antenna system is grounded so as to

provide some protection against voltage surges and built up static

charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-

1984, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding connectors, location

of antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode_ See Figure below_

Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through

openings.

Battery Usage CAUTION - 'Ib prevent bmtery leakage that may

result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on

the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC]

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the /

building, as close to the point of cable entry as practical ]

Example of Antenna Grounding

as per NEC - National Electric Code

GROUNDCLAI_dP ANTENNALEADINWIRE

ANTENNADISCHARGEUNIT(NECSECTmN8lingo)

GROUNDINGCONDUCTORS(NECSECTmNa_o-zl)

GROUNDCLAMPS

ELECTRICSERVICEEQUIPMENT _ POWERSERVICEGROUNDINGELECTRODESYSTEM(NECA_T2SO,PABTH)

INTRODUCTION

Welcome/Registration of Your TV ..................... 2

Safety/Precautions ............................... 2 3

Features .......................................... 5

INSTALL MENU CONTROLS

How to use the Language Control ............... 6

How to use the Tuner Mode Control ................... 7

How to use the AutoFrogram Control .................. 8

How to Add or Delete Channels (Channel Edit) .......... 9

How to use the Name Control (Channel Label) .......... 10

How to se the TV Clock using the AutoChron 'jM Control ,, 11

PICTURE MENU CONTROLS

Adjusting the Brightness Control ............... 12

Adjusting Ihe Color Control ......................... 12

Adjusting Ihe Picture Control ........................ 12

Adjusting the Sharpness Control ..................... 12

Adjusting the Tint Control .......................... 12

How to set the Color Temp Control ................... 12

How to use the Digital Options Control ................ 13

How to set the Dyn(amic) Contrast Control ............ 14

SOUND MENU CONTROLS

Adjusting the Treble Control .................. 15

Adjusting the Bass Control .......................... 15

Adjusting Ihe Balance Control ....................... 15

How to use the AVL control ......................... 16

How to use the Incr,(edible) Surround Control .......... 17

How to set the Stereo Control ....................... 18

How to set the TV to receive Secondary Audio

Programming, also known as the SAP Control .......... 18

How to set the Audio Out Control .................... 19

How to turn the TV speakers on or off using

the Speaker Control ............................... 20

FEATURE MENU CONTROLS

How to use the Timer controls:

Setting the TV Clock using the Time Control .......... 21

Setting a time for the TV to turn itself on using

the Start Time Control ............................ 22

Setting a time tbr the TV to mm itself off using

the Stop Time Control ............................ 23

Setting the TV to start on a specific channel using

the Channel Control .............................. 24

How to activale the controls using the Activa/e Control , ,25

How to view the time using the Display Control ....... 26

How to activale the Active Control "rM ................. 27

How to use the AutoLock vM Controls:

Understanding Ihe AntoLock 'jM Feature .............. 28

Setting up an AntoLock 'jMAccess Code .............. 29

How to Block Channels ........................... 30

How to Clear All blocked channels at the same time ,, ,31

Blocking programming based on Movie Ratings ...... 32

Blocking programming based on TV Ratings ......... 33

AntoLock 'jM Blocking Options - Blocking Control ..... 34

AntoLock 'jMBlocking Options - No Rating Control .... 35

How to review the AutoLock 'jMControl Status ........ 36

How to use the Closed Captioning Control ............. 37

How to change the screen (size) format using

the Format Control ................................ 38

How to use the Rotation Control ..................... 39

How to activale the Blue Mule Control ................ 40

[] REHOTE CONTROL RELATED FEATURES

How to set the Sleep Timer Control ............ 41

How to Use the Freeze Control ...................... 42

Using Ihe AntoPicture "rMControl ..................... 43

Using Ihe AntoSound 'jMControl ...................... 44

Using the Surf Control (and Alternate Channel) ......... 45

Using the Remote Control with accessory devices

Direct Access Method ............................ 46

Code-Entry Method .............................. 47

Search Method .................................. 48

Direct-Entry Code list for accessory devices ......... 49-50

Remote Control VCR Specific Button ................. 51

GENERAL INFORMATION

Troubleshooting ............................ 52

Care and Cleaning ................................ 52

Glossary of lerms ................................. 53

Index ........................................... 53

Factory Service Locations ........................ 54-55

Limited Warranty ................................. 56

Refer to the simple Quick Use and

Setup Guide (supplied with your TV)

for details on the following:

• Basic TV connections

• Advanced TV connections

• Basic TV operation

• Basic Remole Control operation

• Remote Control Button Descriptions

!9>>>_ ....

Active Control TM conrinuonsly measures and corrects all incom-

ing signals to help provide the best picture quality, _l_is feature

monitors and corrects both the sharpness control and noise

reduction control,

Audio/Video Jack Panel allows direct connections with VCRs,

DVDs, or other devices, providing quality TV picture and sound

playback,

Audio Volume Leveler (AVL) Control keeps the TV sound at

an even level, Peaks and valleys that occur during program

changes or commercial breaks are reduced, making for a more

consistent, comfortable sound.

AutoChron TM automatically sets the right time of day and

maintains it with digital precision through brownouts, power

failures, and even Daylight Savings Time adjustments,

AutoLock TM allows you to block the viewing of certain chain

nels or programs with certain ratings if you do not want your

children to view inappropriate materials,

Auto Programming scans (when activated) for all available

channels from regular antenna or cable signals and stores only

active brnadcast stations in the TV's memory,

AutoPicture TM allows you to change the picture settings (colol;

tint, contrast, etc,) for various types of programming, such as

sports, movies, multimedia (games), or weak signals with the

push of one bntton,

AutoSound TM allows you to select from three factory_set con-

trols and a personal control that you set according to your own

preferences through the onscreen Sound menu, The three facto-

ry-set controls (Voice, Music, and _l_eatre) enable yon to tailor

the TV sound so as to enhance the parlicular programming you

are watching.

Channel Edit allows you to add or delete channels from the list

stored in the TV's memory. Channel Edit makes it easy to limit

or expand the number of channels that are available to you when

you press the Channel (+) or () buttons on your remote control.

Closed Captioning allows the viewer to read TV program dia-

logue or voice conversations as onscreen text,

Dynamic Contrast helps to sharpen the picture quality by

improving the contrast between the darkest and brightest parts of

the picture,

Eye Fidelity (also know as Digital Options) give a choice of

two difl:erent scanning technics - Progressive Scan or interlaced,

Progressive Scan doubles the number of visible lines per field by

displaying all picture frame lines at once, eliminating any picture

flicker, ]_e Interlaced mode provides a double vertical display

scan, which reduces annoying motion sweeps, The interlaced

mode will also smooth oat the jagged lines sometimes seen on

the edges of curved or angled surfaces,

Infrared Remote Control works your TV and other remote-

controlled devices, such as VCRs, DVD players, cable convert-

ers, and satellite receivers,

Onscreen Menu shows helpful messages and instructions for

setting TV featnre controls (can be viewed in English, French, or

Spanish).

Sleep Timer automatically turns the TV OFF after a set amonnt

of time that yon choose,

Standard Broadcast (VHF/UHF) or Cable TV (CATV) chan_

nel capability allows for viewing by antenna or cable,

Stereo capability, including a beih-in audio amplifier and twim

speaker system, allows for the reception of TV programs broad_

cast in stereo sound,

Surf Button allows yon to easily switch among only the chan-

nels that are of interest to you (the ones that you have

wogrammed into the TV's Surf control throngh the onscreen

nmnu),

Timer allows you to set your TV to turn itself ON and OFF

once or daily like an alarm clock,

As you unpack your TV, please note that this Directions

,for Use manual contains _fety-tip information and

Factory- Service Center locations, as well as a Warranty

Registration Card, remote control, and batteries for use

with the remote control.

Please take a few minules to complete your registration

card, The serial number for the TV is on the rear of the set.

Ret?r to the back of this manual for instructions in the

cleaning and care of the TV.

Your new television and its packing contain ma/erials that

can be recycled and reused, Specialized companies can recy-

cle your product to increase the amount of reusable materials

and minimize the amounts that need to be properly disposed.

Your product also uses batteries thai should not be thrown

away when depleted, but should be handed in and disposed of

as small chemical was/e,

When you replace your existing equipment, please find out

about the local regula/ions regarding disposal of your old lel-

evision, bat/cries, and packing malerials,

As an Energy Star@ Partner, Philips Consumer

Electronics has determined this product meets

the Energy Star@ guidelines for energy efficien-

cy. Energy Star@ is a U,S. registered mark. Using products

with the Energy Star@ label can save energy. Saving energy

reduces air pollution and lowers utility bills,

Active Control, APAC, AutoPicture, AutoSound, AutoChron,

and Incredible Surround are trademarks of Philips Consumer

Electronics,

For or SpalHsh and French-speaking TV

owners, an onscreen LANGUAGE option

is present. The LANGUAGE comrol enables

you to set the TV's o#_screen menu to be show#_

in either English, Spanish, or French.

Press the MENU button on the remote

control to show the onscreen menu.

Press the CURSOR DOWN button

repeatedly until INSTALL is highlighted.

Press the CURSOR RIGHT button to

shift the menu to the left and highlight

LANGUAGE.

Press the CURSOR RIGHT button to

highlight the LANGUAGE control

options.

Press the CURSOR UP or CURSORDOWN button to select ENGLISH,

ESPANOL (Spanish), or FRANCAIS

(French),

Press the STATUS/EXIT button to

clear the menu from the screen,

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii7 7i! !ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!

Remember, the LANGUAGE control makes

only the TV's onscreen MENU items

appear in English, Spanish, or French text,

it does not change the other onscreen text

features, such as Closed Captioning (CC),

with TV shows.

a BRIGHTNESS

• SOUND COLOR

• FEATURES PICTURE

• INSTALL SHARPNESS

TINT

'© 0

"(Z) C? (Z) C?

®®®®

PHILIPS

• PICTURE LANGUAGE

• SOUND TUNERMODE

• FEATURES AUTOPROGRAM

a CHANNELEDIT

AutoChron

INSTALL

• TUNERMODE F_NCAIS

• AUTOPROGRAM ESPANOL

• CHANNELEDIT

• AutoChron

INSTALL •

4 LANGUAGE

• TUNERMODE

• AUTOPROGRAM

• CHANNELEDIT

• AutoChron

Tche TUNER M()DE f!,ature allows you to

*hange the TV s signal input to CABLE,

ANTENNA, or AUTO mod_,. It's imporTant f!Jr

the TV to know if you want to receive chan-

nels,f!_)m a cable TV signal or a normal

al_t_l_Ha sig!lal_

NOTE: The AUTO moch, setting helps the TV

d_t_,rmine the type of signal or _hannels being

receA ed when AUTD PROGRAM is a_ tivated.

Press the MENU button on the

remote control to show the onscreen

menu,

Press the CURSOR DOWN buttonrepeatedly until INSTALL is highlighted.

Press the CURSOR RIGHT button

to shill the menu to the left,

Press the CURSOR DOWN button

once to highlight TUNER.

Press the CURSOR RIGHT buttonto highlight the TUNER MODE

options,

Wfih the TUNER MODE control set to

AUTO, the Auto Program control will

detect whether or not cable input is

present. (See the Auto Program section

on the next page,)

If, however, you want to set Ihe

TUNER MODE to CABLE or

ANTENNA, press the CURSOR UP

or CURSOR DOWN button until

either CABLE or ANTENNA is high-

lighted,

Press the STATUS/EXIT button to

clear the menu fi'om the screen.

When CABLEis selec/ed, channels 1 125

are available.

When ANTENNA is selected, channels

2 69 are available.

BRIGHTNESS

• SOUND COLOR

• FEATURES PICTURE

• INSTALL SHARPNESS

TINT

PHILIP$

• PICTURE LANGUAGE

• SOUND TONERNODE

• FEATURES AUTOPROGRAN

CHANNELEDIT

AatoChron

INSTALL

• TUNERNODE FRANCAIS

• AUTOPROGRAN ESPAHOL

• CHANNELEDIT

• AutoChron

INSTALL •

•LANGUAGE

• b AUTO

• AUTOPROGRAN CABLE

• CHANNELEDIT ANTENBA

• AutoChron

INSTALL •

• LANGUAGE

TUNERNODE

• AUTOPROGRAM

• CHANNELEDIT

• AutoChron

y_;ur TV can automatically set itse!f for local

tea (or cable TV) chamwls. This makes it

easy.flit you to select only the TV stations in

your area by pressing the CHANNEL (+) or (-)

button.

Press the MENU button on the remote

control to show the onscreen menu.

Press the CURSOR DOWN button

repeatedly until INSTALL is highlighted.

Press the CURSOR RIGHT button toshill the menu to the left. LANGUAGE

will be highlighted.

Press the CURSOR DOWN button

repeatedly until the AUTO PP,OGP, AM

control is highlighted.

Press the CURSOR RIGHT button to

start the Auto Program scanning of chan-

nels,

Press the STATUS/EXIT button to

clear the menu from the screen,

evvL

After you've run Auto Program, check out

the results. Press the CHANNEL (+) or ( )

button and see which channels you can

select.

P,emember, an antenna or cable TV signal

must first be connected to your TV.

a BRIGHTNESS

• SOUND COLOR

• FEATURES PICTURE

• INSTALL SHARPNESS

TINT

@®®®

PHILIPS

¸//2¸¸

• PICTURE LANGUAGE

• SOUND TUNERMODE

• FEATURES AUTOPROGRAM

a CHANNELEDIT

AutoChron

INSTATE

_) EROLISH

• TUNERMODE FRANCAIS

• AUTOPROGRAM ESPANOL

• CHANNELEDIT

• AutoChron

INSTALL •

• LANGUAGE

• TUNERMODE

• ) SEARCH

• CHANNELEDIT

• AutoChron

INSTALL •

•LANGUAGE

• TUNERMODE

4 AUTOPROGRAM

• CHANNELEDIT

• AutoChron

CHANNEL ED1T makes it easy ¢br you to

add o1"delete channels firm the list qf chan-

nels stored in the TV's memory.

Press the MENU button on the remote

control to show the onscreen menu.

Press the CURSOR DOWN button

repeatedly until INSTALL is highlighted.

Press the CURSOR RIGHT button toshift the menu to the lefL LANGUAGE

will be highlighted.

Press the CURSOR DOWN button

repeatedly until the CHANNEL EDIT

control is highlighted.

Press the CURSOR RIGHT button to

access the CHANNEL EDIT menu.

Press the CURSOR UP or CURSOR

DOWN button to scroll lhroagh 1helist

of available channels. Or press the num-

ber buttons on your remote control to

select a st_cific channel (for example,

press 0 and then 2 lo select channel 2).

Wilh the channel you want lo edit select-

ed, press the CURSOR RIGHT button

lo mark lhe channel as SKIPPED. The

channel you've marked SKIPPED will not

appear when you are changing from chan-

nel lo channel while watching TV.

NOTE: When you want to add a channel thai

has been marked SKIPPED, press the CUR-

SOR UP or CURSOR DOWN button to high-

light the channel; then press the CURSOR

RIGHT button to remove the word SKIPPED.

The channels available for you to edit are the

ones thaT the AUTO PP,OGRAM thamre

found while performing a search of your TV

antenna or cable TV signals. Channels not

found during the search are marked

SKIPPED.

_/!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_:_;;IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII_!_

BRIGHTNESS ...................................................................................................................

• SOUND COLOR

• FEATURES PICTOEE

• iNSTALL SHARPNESS

TINT

PHILIPS

• PICTOEE LANGUAGE

• SOHND TONERMODE

• FEATURES AUTO PROGRAM

CHANNELEDIT

AutoChron

INSTALL

_ ENGLISH

• TUNERMODE FRANCAIS

• AUTOPROGRAM ESRANOL

• CHANNEL EDIT

• AutoChron

INSTALL

• LANGUAGE 66 SKIPPED

• TONERMODE 67 SKIPPED

• AOTO PROGRAM 68 SKIPPED

• A_toChron KVI

INSTALL •

• LANGUAGE

• TUNERMODE

• AUTO PROGRAM

• CHANNELEDIT

• AutoChron

T_w channel NAME iFature allows you to list

he "call" letters qi'your fin,orite stations

beside their channel numbers when the)"

appear on the screen. 77w TV has in memo13, a

list qf the 50 most popular channel names (/br

example, ABC, NBC, FOX, etc.). Ybu also can

enter a custom name (up m five characters).

Press the MENU button on the remotecontrol to show the onscreen menu.

Press the CURSOR DOWN button

repeatedly until INSTALL in highlight-

ed.

Press the CURSOR RIGHT button to

shift the menu to the left. LANGUAGE

will be highlighted.

Press the CURSOR DOWN button

repeatedly until rite NAME conlrol is

highlighted.

Press the CURSOR RIGHT button to

highlight the NAME options area.

Press the CURSOR UP or DOWN but-

ton to scroll Ihe list of names, or press

the CURSOR RIGHT button to enter a

personal name. Press the CURSOR UP

or CURSOR DOWN button to scroll

through a list of options for the first char-

acter (A lhroagh Z, 0 through 9). Press

the CURSOR RIGHT button and

repeal for the second, third, fourth, and

fifth characlers.

After you have selected a name For thechannel, press the MENU button to

save the name in the TV s nemory.

Press the STATUS/EXIT button to

clear the menu from the screen.

• SOUND COLOR

• FEATURES PICTURE

• INSTALL SHARPNESS

TINT

• PICTORE LANGUAGE

• SOOND TONERMODE

• FEATURES AOTOPROGRAM

m CHANNELEDIT

AatoChr0n

®®®®

INSTALL

• _ ENGLISH

• TUNERNODE FRANCAIS

• AUTOPROGRAM ESPANOL

• CHANNELEDIT

• AutoChron

INSTALL t

8 TUNERMODE

• AUTOPROGRAM

• CHANNELEDIT

• AutoChron

/ •_ PERSONAL

INSTALL t_

8 TUNERMODE

• AUTOPROGRAM

• CHANNELEDIT

• AutoChron

• flAME

_//////////////////////////////////////////////////////////////////////////////////////////////

A utoChron TM can automatically set the TV's

onscreen clock. Because the time is

rc_ceived ii'om a broadcast signal, you must be

surc_that a cable TV or antenna signal is prc_s-

ent be_bre you attempt to use the AutoChron TM

Press the MENU button on theremote to show the onsoreen menu,

Press the CURSOR DOWN button

repeatedly until INSTALL is highlight-

ed.

Press the CURSOR RIGHT button

to shift the menu to the left+ LAN-

GUAGE will be highlighted.

Press the CURSOR DOWN button

until the AutoChron control is high-

lighted+

Press the CURSOR RIGHT buttonto start the AutoChron TM feature, Then

just follow the onscreen instructions to

set the clock,

Press the CURSOR RIGHT button toselect AUTO. Within a few seconds, a

menu for choosing your time zone will

appear.

Press the CURSOR UP or CURSOR

DOWN button to highlight your cor-

rect time zone+

With your correct time zone high-

lighted, press the CURSOR RIGHT

button. Within a few seconds, you

will be given the option to choose

whelher you want to select Daylight

Savings Time,

Press the CURSOR UP or CURSOR

DOWN button to navigale through the

YES and NO selection list; then with

the item you want to select highlight-

ed, press the CURSOR RIGHT but-

ton. Follow the onscreen instructions

(shown below) to set the AutoChron TM

time either automatically or manually.

Note: When turned ON, the AutoChron TM

feature can affect the start up of your televi-

sion. When the power button is press and the

AntoChron TM feature is set to the AUTO

position, the TV will scan the channels For a

PBS channel to set Ihe clock automatically;

It may take SEVERAL seconds before the

TV powers itself ON.

INITALL

• TU_ER MODE

• AUTO PR0_RkM

• _ffA_NELEDIT

• kut_Chr0n

• _0lJ_t3 COL0i_ iiiiiiiiiiiiil TM

• _NgTALL IffAKPNESI i i • piCl_lE L_GIIAGE

• SOu_B TU_ET__OgE

• FEkTU_*EI kO[O p_OG,'_a_4

O_A_EL EDIT

_toChlen

INSI_LL

m 1_ ENGLISH

• TUNER _ODE F_NU_IS

• CHAN_EL EOIT

INSTkLL

• TUNE_ _09E

• CHA_EL EDIT

m l_A[gO

_ANU_

INSTALL I_ITALL INSTALL

• TU_K T4OB_ • TU_EK MOB_ • TUNET¢ _OgE

• CffA_NELEBIT

• AUTO PR0_Rk_ • AUTO PR0_Rk_ • AUTO PEOGR_

• CffA_EL EDIT • CHA_EL EDIT

4 ku_Chron 4 ku_Chron _ _teChlon

SET CLOCK MANUAL

• TU_ET__ODE • TU_ET__ODE • TU_EK 14OBE

• k_IO PRO&&M • AUTO P_O&&M • A_TO PRO_EkM

• O_I_,NEL E_IT • O_I_NEL E_IT • CffA_NEL EBIT

• k_teChlon 4 _teChlon _ AetoChron

r_) ad/ust your TV picture controls, select a

X chamwl andfi_llow these steps,

Press the MENU button on the remotecontrol to show the onscreen lnena. PIC-

TURE will be highlighted,

Ill!ItlNIIIL - --..

Press the CURSOR RIGHT button and

the menu will shift to the left. BRIGHT-

NESS will be highlighted and an adjust-

ment bar will be shown to the right.

Use the CURSOR LEFT or CURSORRIGHT button to adjust lhe BRIGHT-

NESS level of flae picture.

After adjusting the BRIGHTNESS con-

trol, press the CURSOR DOWN button

to select another piclare adjaslment:

COLOR, PICTURE, SHARPNESS,

TINT, OR COLOR TEMR Press the

CURSOR LEFT or CURSOR RIGHT

button to adjust the selecled control.

NOTE: "l_e menu will show only five ilems a/a

time, so you will need to continue scrolling wilh

the CURSOR DOWN button to adjust the TINT

and COLOR TEMP.

;]IU[III j --- •

Press the STATUS/EXIT button to

remove the menu fl'om the screen.

Remember, when the bar scale is centered

, the control settings are at

normal, mid-range levels, Picture adjust-

ments are described here.

NOTE: The SHARPNESS and TINT

Controls will not be available for adjust-

ments when tuned to the AV4 Inputs (AV4

Channel) and CVI Inputs (CVI Channel),

BRIGHTNESS adds or subtracts light

from the darkest part of the picture.

COLOR adds or eliminates color.

PICTURE - improves the detail of the light-

est parts of the picture.

SHARPNESS improves the detail in the

9icture,

TINT adjusts the picture lo obtain natural

skin tones.

COLOR TEMP ofPers NORMAL, COOL,

or WARM picture preferences,

NORMAL keeps whites, white.

COOL makes whites, bluish.

WARM makes whiles, reddish,

BRIGHTNESS

• SOUND COLOR

• FEATURES PICTURE

• INSTALE SHARPNESS

TINT

®®@/

®@

PHILIPS

llllllll!mn_P- rrlllllll_..

_]lllllllllll I I +1+ [Tlh+lil'l

[l[ll[lllIIl_t_ II]lll

PICTURE •

• COLOR

• PICTURE

• SHARPNESS

• TINT

PiCTURE •

• BRIGHTNESS

Illllll m. 3

• PICTURE

• SHARPNESS

• TINT

PICTURE •

• BRIGHTNESS

• COLOR

• SHARPNESS

• TINT

PICTURE ,

• BRIGHTNESS

• COLOR

• PICTURE

]1_'!: Idll_ i,,, m- 3

• TINT

PICTONE •

• BRIGHTNESS

• COLOR

• PICTURE

• SHARPNESS

PICTURE t

e COLOR

• PICTURE

• SHARPNESS

• TINT

The Digital Options (Eye Fidelity) control

ires you a choice between two dilf_,rent

picture, scanning modes," Progr_,ssive S_an

and Interlaced (1050i).

Progr_ssive Scan doubles the number of pic-

ture lines, eliminating line flicker and provid-

ing a jitterzfr_,e picture,

bm, rlaced (1050i mod_O improves the appear-

ance of onscreen motion, All 'Picture

Adjustment Controls' stay _ontrollable,

including the Active Control, It also helps

smooth out jagged lines that arc, sometimes

seen on _m ved and angled smfa_ es in the

picture,

Press the MENU button on theremote to show the onscreen menu.

PICTURE will be highlighted.

Press the CURSOR RIGHT button andthe menu will shift to the left. BRIGHT-

NESS will be highlighted and an adjust-

ment bar will be shown to the right.

Press the CURSOR DOWN button

repeatedly until the Digital Options

control is highlighted.

Press the CURSOR RIGHT or

LEFT button until you select the

option you want, either PROGRES-

SIVE or 1050i.

Press the STATUS/EXIT button to

remove 1bemenu fl'om 1be screen.

The Digital Options (Eye Fidelity) Control

is not available for use with the AV 4 input

jacks.

I:t[t[rll|ll[_--

TINT

PHILIPS

PICTURE •

I mf

•(OLOR

• PICTURE

• SHARPNESS

• lINT

PICTURE t

PICTURE

• SHARPNESS

• TINT

• COLORTEHP

Tthe Dynamic Contrast control allows you

o shar?en the picture quality by making

clark portions of the pk ture darker and light

portions qf the picture more noticeable.

Normally, you will probabl_, want to select

MED. In certain circumstances, howe_ e_; you

may prefer MIN or MAX.

Press the MENU button on theremote to show the onscreen menu.

PICTURE will be highlighted.

Press the CURSOR RIGHT button andthe menu will shift to the left. BRIGHT-

NESS will be highlighted and an adjust-

ment bar will be shown to the right.

Press the CURSOR DOWN button

repeatedly until the DYN, CON-

TRAST control is highlighted.

llnIlllll]_l|_(:'lll [ ]] ii

Press the CURSOR RIGHT or

LEFT button until you select the

option you want, either OFF, MIN,

MED, or MAX,

Press the STATUS/EXIT button toremove file menu fl'om file screen.

• SOUND COLOR

• FEATURES PICTURE

• INSTALL SHARPNESS

l;|tl[f1111+_+

TINT

PICTURE •

• COLOR

• PICTURE

• SHARPNESS

• TINT

]l|'l+llllll+lltl++_a,, • ]_._N

PHILIPS

PICTURE t_

II SHARPNESS

• TINT

• COLORTENP

• DIGITALOPTIONS

Besides the normal volume level control,

your TV also has individual sound-acliust-

ment controls. The TREBLE (high fr_,quen-

cy), BASS (Iow fr_,queno'), and Speaker BAL-

ANCE" may all be used to acliust the sound

playback qf TV programs.

Press the MENU button on theremote control to show the onscreen

menu,

Press the CURSOR DOWN button

once to highlight SOUND.

Press the CURSOR RIGHT button

and the menu will shift to the lefl.

TREBLE will be highlighted and an

adjustment bar will be shown to the

right.

Use the CURSOR RIGHT or CUR-

SOR LEFT button to adjust the TRE-

BLE (high frequency) level of the tele-

vision's sound.

After adjusting the TREBLE control,press the CURSOR DOWN button to

select another sound adjustment:

BASS or BALANCE.

Press the CURSOR RIGHT or CUR-

SOR LEFT button to adjust the

selected control,

Press the STATUS/EXIT button to

remove the menu from the screen,

Remember, when the bar scale is centered,

speaker BALANCE is centered between the

TV s letl a ld right side speakers.

• PICTURE TREBLE

a BASS

• FEATURES BALANCE

• INSTALL AVL

INCR.SURROUND

SOUND •

_lll[t|l

• BASS

• BALANCE

• AVL

• INCR.SURROUND

__ SOUND •

• TREBLE

D:I .....

;;__(:i;h I•BALANCEAVL

_ INCR.SURROUND

• TREBLE

• BASS

• AVL

c. 4 _ ; INCR'SURROUND

PHILIPS

I_)+ most cases, the volume levels coming

"ore broadcast programming or commer-

cials arc, never the same. With the AVL

(Audio Volume Le_el_,r) control turned ON,

you can have the TV level out sound that is

being heard, "l'his makes,f!)r a more _onsis-

t_mt sound by reducing the peaks and valleys

that occur during program _hanges or _om-

inertial br(_aks. "lb turn the AVL ON, follow

these str,ps,

Press the MENU button on theremote control to show the onscreen

men[t,

Press the CURSOR DOWN button

once to highlight SOUND.

Press the CURSOR RIGHT button

and the menu will shift to the letL

TREBLE will _ highlighted and an

adjustment bar will be shown to the

right,

_1 [.'!r i_zll

Press the CURSOR DOWN button

repeatedly until AVL is highlighted.

Press the CURSOR RIGHT or CUR-

SOR LEFT button to toggle AVL ON

or OFF, :t L'I+ .....

Press the STATUS/EXIT button toremove the menu from the screen.

• PICTURE TREBLE

BASS

• FEATURES BALANCE

• INSTALL AVE _

INCR.SURROUND

-0

PHILIPS

SOUND •

Iltli

--ii

• BASS

• BALANCE

• AV[

• INCR.SURROUND

SORNU •

• TRERL[

• BASS

• BALANCE

• INCR.SURROUND

SORNU •

• TRERLE

• BASS

• BALANCE

• INCR.SURROUND

B T

l_e Incredible Surround f(,ature adds

rearer dcT)th and dimension to both mon-

aural (MONO) and stereo TV sound, With

the control set to INCR. SURROUND

(lncrc_dible Surround), the TV's speakers can

add e_en wider sound scT)aration to normal

broadcasts,

Press the MENU button on theremote control to show the onscreen

menu,

Press the CURSOR DOWN button

once to highlight SOUND.

Press the CURSOR RIGHT button

and the menu will shift to the letL

TREBLE will _ highlighted and an

adjustment bar will be shown to the

right,

Press the CURSOR DOWN button

repeatedly until INCR. SURROUND is

highlighted,

ill llttlll'llltlt(llll II IIl]il Illtt I

Press the CURSOR RIGHT or CUR-

SOR LEFT button to toggle the

INCR, SURROUND control settings,

If signal is Stereo: Select STEI_.EO, or

INCR, SURROUND,

lll[llillllt_llllllllI]l]li[lll[

lll[llillRt_lllllllii l.llllil I_

If signal is MONO: Select MONO, or

SPATIAL,

Press the STATUS/EXIT button to

remove the menu from the screen.

You can also change the INCR, SUR-

ROUND onscreen menu control set-

tings by pressing the INCREDIBLE

SURROUND _ button on the remole

control,

SPATIAL - widens the Mono sound, simu-

lating a broader, fuller sound,

INCR. SURROUND - widens the Stereo

sound, simulating a broader, fuller sound,

• PICTURE TREBLE

BASS

• FEATURES BALANCE

• INSTALL AVL

INCR.SURROUND

-©

SOUND •

• BASS

• BALANCE

• AVE

• INCR.SUBBOUND

B I

SOUND •

• TREBLE

• BASS

• BALANCE

• AVE

If thesignal is in STEREO,choosefrom:

:1 ill [llllldlJlt 7111111II"l]llt III

PHILII_

u can receive broadcast stereo TV pro-

rams, The TV has both an amplifier and

twin sT)eakers thl-ough which the stereo sound

can be healzl,

Press the MENU button on the remote

control to show the onscreen menu.

Press the CURSOR DOWN button

once to highlight SOUND,

Press the CURSOR RIGHT button

and the menu will shift to the lefL TRE-

BLE will be highlighted and an adjust-

ment bar will be shown to the right.

Press the CURSOR DOWN button

repeatedly until STEREO is highlighted.

Press the CURSOR RIGHT or CUR-

SOR LEFT button to select STEREO

or MONO,

Press the STATUS/EXIT button toremove the menu from the screen,

Remember, if stereo is not present on a

selected show and the TV is placed in the

STEREO mode, the sound coming from the

set will remain monaural,

",CTUNETNEBLE......<ii!iiiiill

a BASS

• FEATURES BALANCE SOUND •

• INSTALL AVL

:]Bill|:

INCR.SUBNOUND '"

• BASS

• BALANCE

• AVL

.....ililiiiiiiii!i;

iiiii , ;

SOUND t

e BASS

• BALANCE

• AVL

• INCR.SURROUND

BtJ_ nml|itti

SOUND t_

e BASS

• BALANCE

• AVL

c_ 3 5 "INCB. SURBOUND

Z @ ' '

]i,t i II ]_ tll|[ti

II_n]l_[i] tll [_1]_1]

An SAP is an additional part of the slereo

broadcast syslem. Sent as a third audio

channel, an SAP can be heard seperate from

the current TV program sound, TV stations

are free to use SAP for any number of pur-

poses.

|$1 ,=,_lll I [!l(l!| IIr:l:

If an SAP signal is not present with a select-

ed program, the SAP option cannot be select-

ed, Also, if SAP is selected on a channel

(with SAP) and you select another channel,

when you return to Ihe original channel, SAP

will be OFE You will have to reselect the

SAP feature,

SOUND t

BALANCE

e AVL

• INCR.SURROUND

• STEREO

e IF

IFSECONDARYAUDIO PBOGBAMING

ISBEING BROADCAST:

i 'fa __'_*1!|11!|a,

]z, I

SOUND i

BALANCE

• AVL

• INCR.SURROUND

• STEREO

IFSECONDARYAUDIO PBOGBAHING

ISNOT BEING BROADCAST:

i|iii'y4 ]ii,I

_f you have cmmected the TV's AUDIO

1'OUTPUT jacks to the AUDIO INPUT jacks

on a stereo receiver; set AUDIO OUT to

either VARIABLE or' FIXED to ch,termine

whether you acljust the volume at the ster_o

or at the TVI lf you select VARIABLE, change

the _olume at the TV using the TV's remote

control. If you select FIXED, acljust the _ol-

ume at the sterc_o using the ster_o's controls.

1b select FIXED or VARIABLE, follow these

stu)s.

Press the MENU button on theremote control to show the onscreen

menu,

Press the CURSOR DOWN button

once to highlight SOUND.

Press the CURSOR RIGHT button

and the menu will shift to the left.

TREBLE will _ highlighted and an

adjustment bar will be shown to the

right,

Press the CURSOR DOWN button

repeatedly until AUDIO OUT is high-

lighted.

Press the CURSOR RIGHT or CUR-

SOR LEFT button to select FIXED or

VARIABLE.

Press the STATUS/EXIT button toremove the menu from the screen.

• PICTURE TREBLE

BASS

• FEATURES BALANCE

• INSTALL AVL

INCR.SURROUND

SOUND •

SOUND

R AVE

• INCR.SURROUND

• STEREO

• SAP

SOUND i

R AVE

• INCR.SURROUND

• STEREO

• SAP

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i i! i! ! i¸

FIXED If FIXED is selected, the sound

coming from the TV and being heard

through an exmmal audio system is not

adjustable with the television's volume

controls. The volume would have to be

adjusted at the attdio system,

VARIABLE If VARIABLE is selecmd,

the sound coming from the TV and being

heard through an external audio sysmm can

be adjusted a/the TV using the Volume +

or buttons on the television or remole

control.

PHILIPS

U;ing the TV's Audio (Monitor) Output

acks and TV Speaker ON/OFF control

an exT_,rnal audio sysT_,m can be used to hear

The sound coming from The "I'V.The Speaker

Control will allow you to turn the television's

speakers off so The TV sound wouM only be

heard through The audio system. Pl_,ase refer

TOthe Quick Use and Hookup Guide fiJr The

proper _onnections needed to hookup an

external audio system.

Press the MENU button on theremote control to show the onscreen

menEt,

Press the CURSOR DOWN button

once to highlight SOUND.

Press the CURSOR RIGHT button

and the menu will shifT to the left.

TREBLE will _ highlighted and an

adjustment bar will be shown to the

right.

Press the CURSOR DOWN button

repeatedly until SPEAKEP, S is high-

lighted.

Press the CURSOR RIGHT or CUR-SOR LEFT button to tuin the televi-

sion's speakers ON or OFF.

Press the STATUS/EXIT button to

remove the menu from the screen.

Be sure to first connect an extemal audio

system to the television's Monitor Output

(audio) jacks.

• PICTURE TREBLE

BASS

• FEATURES BALANCE

• INSTALL AVL

INCR.SURROUND

PHILIPS

SOUND •

Ii •

• BASS

• BALANCE

• AVL

• INCR.SURROUND

SOUND

! INCR.SURROUND

• STEREO

• SAP

• AUDIOOUT

SOUND OR

! INCR.SURROUND

• STEREO

• SAP

• AUDIO OUT

If the SPEAKERS Control is turned

OFF and no external attdio system is

connecled, there will be no sound

heard at the TV.

tack Panel

on back of TV

External Audio System

tack Panel

Page is loading ...

Philips 30PW850H Owner's manual

Brand: Philips

Model: 30PW850H

Category: LCD TVs

Type: Owner's manual

Download PDF

report

Philips 30PW850H Owner's manual

Philips 30PW850H Owner's manual

Related papers

Other documents