Bartscher 100273 Operating instructions

Bartscher
Brand
Bartscher
Model
100273
Category
Sandwich makers
Type
Operating instructions
Mini-XS
100273
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2020-02-10
EN
100273 1 / 18
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of signal words ..................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended use ............................................................................................ 6
1.4 Unintended use ........................................................................................ 6
2 General information ....................................................................................... 7
2.1 Liability and warranty ............................................................................... 7
2.2 Copyright protection ................................................................................. 7
2.3 Declaration of conformity ......................................................................... 7
3 Transport, packaging and storage ................................................................. 8
3.1 Delivery check ......................................................................................... 8
3.2 Packaging ................................................................................................ 8
3.3 Storage .................................................................................................... 8
4 Technical data ............................................................................................... 9
4.1 Technical specifications ........................................................................... 9
4.2 List of components of the appliance....................................................... 10
4.3 Functions of the appliance ..................................................................... 10
5 Installation and operation ............................................................................ 11
5.1 Installation .............................................................................................. 11
5.2 Operation ............................................................................................... 12
6 Cleaning ...................................................................................................... 15
6.1 Safety Instructions for cleaning .............................................................. 15
6.2 Cleaning ................................................................................................. 15
7 Disposal ....................................................................................................... 16
Safety
2 / 18 100273
EN
Diese Bedienungsa nleitung besc hreibt die Installa tion, Bedienu ng und Wartu ng des Geräts u nd gilt als wic htige Informationsqu elle und N achschlagewer k. Die Kenntnis aller enthaltene n Sicherheitshi nweise und H andlungsanw eisungen schafft die Voraussetz ung für das sich ere und sac hgerechte Ar beiten mit de m Gerät. Darüber hi naus müsse n die für den Ei nsatzbereic h des Geräts gelte nden örtlichen Un fallverhütungs vorschriften und allgemeinen Sicherheitsbesti mmungen eingehalten werden. Diese Bedi enungsanleitung is t Bestandt eil des Produ kts und muss in unmittelbarer N ähe des Geräts für das In¬s tallations-, B edienungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬b ewahrt werden. W enn das Ger ät an eine dritt e Person
weitergegeben wird, muss die B edienungsanlei tung mit ausgehä ndigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of signal words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Safety
100273 3 / 18
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
, die
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
• Always completely unwind the power cord.
Safety
4 / 18 100273
EN
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
Flammable materials
• Never subject the appliance to contact with high temperature sources, e.g.:
oven, furnace, open flame, heat generating devices, etc.
• To avoid fire hazard, clean the appliance regularly.
• Do not cover the appliance with, e.g., aluminium foil or cloths.
• Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the
appliance may catch fire.
• Never use the appliance near flammable or inflammable materials, e.g.: petrol,
spirit, alcohol, etc. High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.
• In case of fire, disconnect the appliance from the power supply before
attempting suitable fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Hot surfaces
• Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
• Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
• You may transport and clean the appliance after it cools down entirely.
• It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
Safety
100273 5 / 18
EN
Health Hazard Due to Burnt Food Products
• Acrylamides that are present in burnt food products are hazardous to health and
may cause cancer.
• Remove the burnt pieces.
• Do not brown bread excessively.
Operating personnel
• This appliance is not intended to be used by persons (including children) with
limited physical, sensory or mental capabilities, nor by persons with limited
experience and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching the appliance on.
Supervised usage only
• Only supervised appliance may be used.
• Always remain in an immediate vicinity of the appliance.
Improper use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your
own.
• Do not introduce any changes in the appliance nor modify it.
Safety
6 / 18 100273
EN
1.3 Intended use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
This appliance is intended for use in households and similar places, e.g.:
– in employee canteens in shops, offices, and similar areas;
– on farms;
– by customers in hotels, motels, and other typical accommodation
establishments;
– in lodging-houses.
– toasting bread and buns.
1.4 Unintended use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
– baking bread and buns;
– toasting bread products, e.g. garlic bread, sandwiches with cheese or
baked products with sugar icing. During heating up they might stick to the
belt and soil it, and this could, in turn, negatively affect the operation of
the appliance.
General information
100273 7 / 18
EN
2 General information
2.1 Liability and warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
Transport, packaging and storage
8 / 18 100273
EN
3 Transport, packaging and storage
3.1 Delivery check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
Technical data
100273 9 / 18
EN
4 Technical data
4.1 Technical specifications
Name:
Conveyor toaster Mini-XS
Item No.:
100273
Material:
Stainless steel, polished
Heat-up time, in min.:
5
Output per hour / number of toasts,
approx.:
90
Power supply:
1 kW / 230 V / 50 Hz
Dimensions (W x D x H) in mm:
235 x 655 x 395
Weight in kg:
12,8
We reserve the right to implement technical modifications!
Version / Characteristics
• Version: conveyor toaster
• Designed for:
– toast bread
– sandwich toasts
– bagel or bun halves
• Functions: top/bottom heater, top heater, bottom heater
• Conveyor belt speed: stepless control
• Conveyor belt speed and type of heat supply can be controlled separately
• ON/OFF switch
• Control: knob
• Indicator light: heating-up, ON/OFF
<Endergebnis>
Technical data
10 / 18 100273
EN
4.2 List of components of the appliance
1. ON/OFF switch with integrated
operation indicator light (green)
2. Conveyor belt
3. Housing
4. Control panel
4. Discharge tray
6. Feet (4x)
5. Crumb drawer
8. Toast feeder
4.3 Functions of the appliance
In the conveyor toaster, suitable products, e.g. toasts, bun halves or bagels are
conveyed on the conveyor belt though a heating chamber and toasted; then, they
are delivered via discharge tray to a sections, they may be taken from.
Installation and operation
100273 11 / 18
EN
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• To provide for safe operation of the appliance, keep clearance of 3 cm from both
sides, 30 cm at the front and back, as well as 30 cm over the appliance (e.g.
from the bottom of a shelf or ceiling).
Installation and operation
12 / 18 100273
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
5.2 Operation
Important Tips for Optimal Toasting Result
• With the same setting, the toasting effect depends on products' various
properties (humidity, type of bread, size and thickness of bread slices or
bun/bagel halves).
• When toasting dry or smaller and thinner bread slices, set higher speed of the
conveyor belt.
• When toasting products of high humidity, e.g. rye bread or wholemeal bread,
reduce the speed of conveyor belt.
• The slice cut surface should be as smooth as possible in order to achieve a
uniform toasting result.
• Remove loose crumbs or protruding bread components, e.g. grains, before
toasting because they can burn.
• Take into account that during several operations one after another the toaster
becomes hotter and the toasted slices become darker accordingly. If necessary,
select lower speed of conveyor belt for subsequent toasting processes.
Installation and operation
100273 13 / 18
EN
Before the First Use
1. Before use, clean the appliance, observing instructions in section “Cleaning”.
2. Dry the washed elements afterwards.
3. Reinsert the toast feeder and the discharge tray in the appliance.
4. Slide the crumb drawer entirely in the right slot under the toast feeder.
ATTENTION!
Using the appliance without the crumb drawer may lead to the damage
of the appliance or to soiling.
Always use the appliance with the correctly inserted crumb drawer.
5. Plug the appliance into a suitable single socket.
Control Panel
1. Operational indicator light (green)
2. Bottom heater setting
2. Top heater setting
4. Heating-up indicator light (red)
3. Top/bottom heater setting
6. Function selector knob
4. OFF position
8. Conveyor belt speed knob controller
Installation and operation
14 / 18 100273
EN
Toasting
WARNING!
The appliance becomes hot during operation! Hot external surface!
Do not touch any hot surfaces nor insert your hands into the conveyor
toaster.
Right after switching off, the appliance remains hot.
You can move or transport the appliance only when it has cooled down
completely.
1. Switch the appliance on with the ON/OFF switch located at the left of the rear
panel of the appliance.
The green indicator light integrated with the ON/OFF switch will come on.
The green operation mode indicator light will also come on, signalling that the
appliance is operation ready.
The conveyor toaster needs approx. 5 minutes to heat up.
2. Depending on the selected product (toast bread, sandwich toasts, bun or bagel
halves), rotate the function selector knob clockwise and select one of the
functions.
The following temperature settings are available:
– Bottom heater
– Top heater
– Top/bottom heater
When the function selector knob is set in one of the setting positions, the red
heating-up indicator light will come on.
When the function selector knob is rotated to OFF position or when the appliance is
switched off with the ON/OFF switch, the red heating-up indicator light will go off.
3. Use the right controller to set the required conveyor belt speed.
The conveyor belt speed may be set steplessly in the range of 1–7.
The slowest conveyor belt speed equals a longer toasting time, and the fastest
conveyor belt speed equals the shortest toasting time or the smaller browning level
of toast slices or other products.
Cleaning
100273 15 / 18
EN
4. When the heating-up time is over, the
selected product (toast bread, sandwich
toasts, bun/bagel halves) should be
moved onto the toast feeder.
The selected product moves on the
conveyor belt via the heating chamber. The
ready toast reaches the discharge tray and
slides forward to the place it may me taken
from.
5. Remove the ready product with the use
of suitable tongs.
6 Cleaning
6.1 Safety Instructions for cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. Clean the appliance regularly.
2. Remove and empty the crumb drawer.
3. Remove the discharge tray from the appliance by slightly rising it and pulling it
outwards.
4. If needed, you may remove the toast feeder, by pushing both wires inwards.
5. Clean the removed elements with warm water, mild washing agent and soft
cloth or sponge.
Disposal
16 / 18 100273
EN
6. Rinse with fresh water and, to end with, dry all elements thoroughly using a soft
cloth.
7. Clean the external surface with a soft, damp cloth and dry with a soft cloth or a
paper towel.
8. Remove stubborn stains with a stainless steel cleaning agent or with a non-
scrubbing cleaning agent.
9. Clean the conveyor belt and other hard-to-reach places with a dish-washing
brush.
10. Finish with refitting the removed elements in the appliance:
– slide the crumb drawer into the provided slot under the toast feeder;
– reinsert the discharge tray in the appliance, by sliding it in to the end and
secure it at the back of the appliance, using the hook-up element;
– reinsert (provided it was removed) the toast feeder, by keeping both
wires pressed inwards while sliding it into the right opening in the
appliance housing.
7 Disposal
Electrical appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Electrical appliances should be returned to designated collection points.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Bartscher 100273 Operating instructions

Bartscher
Brand
Bartscher
Model
100273
Category
Sandwich makers
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents