Westinghouse Air Handler Insulation Retainer Kit Installation guide

Air Handler Insulation Retainer Kit
Westinghouse
Brand
Westinghouse
Model
Air Handler Insulation Retainer Kit
Type
Installation guide

This manual is also suitable for

Air Handler Insulation Retainer Kit
Installation Instructions
For use with B3/PAH Series Air Handlers
Kit Part Numbers:
A. Cabinet 904344
B. Cabinet 904345
C. Cabinet 904346
INSTRUCTIONS
1. Remove blower door from air handler.
2. Insert wire retainer by manipulating around the blower assembly.
3. Locate the wire retainer in the back of the cabinet approximately 1.5 inches below the
blower deck.
4. Push retainer towards back of unit and snap the short legs of the retainer behind the front
cabinet flange. See figure 1.
5 Re-attach the blower door to the air handler.
O'Fallon, MO
7084740
Specifications and illustrations subject to change
without notice and without incurring obligations.
Printed in U.S.A. (06/05)
Figure 1. Insulation Retainer Location
¢708474?¤
7084740
Wire
retainer
Cabinet
wrapper
Blower
deck
1.5
  • Page 1 1

Westinghouse Air Handler Insulation Retainer Kit Installation guide

Air Handler Insulation Retainer Kit
Westinghouse
Brand
Westinghouse
Model
Air Handler Insulation Retainer Kit
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents