Taylor Technologies K-1640 Owner's manual

Brand: Taylor Technologies

Model: K-1640

Type: Owner's manual

COMPONENTS:

1 x 5202 Instruction

1 x 9198B Sample Tube, Graduated (25 mL) w/ cap & blue dot, plastic

1 x R-0619B-C Hardness Buffer, 2 oz w/ blue cap, DB

1 x R-0620B-I Hardness Indicator Powder, 10 g w/ blue dot

1 x R-0683-C Hardness Reagent, 2 oz, DB

TO ORDER REPLACEMENT PARTS AND REAGENTS CALL TOLL-FREE

800-TEST KIT (800-837-8548).

PROCEDURE:

CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS.

KEEP REAGENTS AWAY FROM CHILDREN.

NOTE: When dispensing reagents from dropper bottles, always hold bottle in a

vertical position.

Total Hardness Test

1.Rinseandll25mLsampletube(#9198B)to25mLmarkwithwatertobetested

(Fig.1).

NOTE: Forresultsingrainspergallon(gpg),llto14.6mLmark.

2.Add5dropsR-0619BHardnessBuer.Swirltomix.

3.Add1dipperR-0620BHardnessIndicatorPowder.Swirluntildissolved.Sample

willturnred(Fig.2)ifhardnessispresent.

4.AddR-0683HardnessReagentdropwise,swirlingandcountingaftereachdrop,

untilcolorchangesfromredtoblue(Fig.3).

DROP TEST

TOTAL HARDNESS (1 drop = 10 ppm)

5.MultiplydropsofR-0683HardnessReagentby10.Recordaspartspermillion

(ppm)totalhardnessascalciumcarbonate.

NOTE: For14.6mLsample,recorddropsasgrainspergallon(gpg)totalhardness

ascalciumcarbonate.

Fig. 1

Fig. 2

Fig. 3

Instr. #5202

31LovetonCircle,Sparks,MD21152U.S.A.

800-TESTKIT(837-8548)•410-472-4340 7/16

COMPONENTS:

1 x 5203 Instruction

1 x 9198W Sample Tube, Graduated (25 mL) w/ cap & white dot, plastic

1 x R-0638W-C Phenolphthalein Indicator, 2 oz w/ white cap, DB

1 x R-0699-C Iodide Iodate Reagent, 2 oz, DB

1 x R-0725-I Acid Starch Indicator Powder, 10 g

TO ORDER REPLACEMENT PARTS AND REAGENTS CALL TOLL-FREE

800-TEST KIT (800-837-8548).

PROCEDURE:

CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS.

KEEP REAGENTS AWAY FROM CHILDREN.

NOTE: When dispensing reagents from dropper bottles, always hold bottle in a

vertical position.

Sodium Sulﬁte Test

NOTE: Sample must be cooled to less than 100ºF (38ºC) to prevent high test

results. Sample must be protected from air contact while cooling to prevent

low test results.

1.Collectwatertobetestedinaclean,preferablylarge-mouthed,bottletooverowing.

Immediately cap and cool to room temperature.

2.Rinseandll25mLsampletube(#9198W)to25mLmarkwithcooled(room

temperature) water to be tested (Fig. 1).

NOTE: Forresultsingrainspergallon(gpg),llto14.6mLmark.

DROP TEST

SODIUM SULFITE (1 drop = 10 ppm)

3.Add1dropR-0638WPhenolphthaleinIndicator.Swirltomix.Samplewillturn

pink(Fig.2).

4.AddR-0725AcidStarchIndicatorPowderadipperatatime,swirlingaftereach

dipper, untilcolorchanges frompink tocolorless.Add 2moredippers.Swirl

until dissolved.

5.AddR-0699IodideIodateReagentdropwise,swirlingandcountingaftereach

drop, until sample changes from colorless to a faint but permanent blue (Fig. 3).

6.Multiply drops of R-0699 Iodide Iodate Reagent by 10. Record as parts per

million(ppm)sodiumsulte.

NOTE: For14.6mLsample,recorddropsasgrainspergallon(gpg)sodiumsulte.

NOTE:Forresultsassulte,multiplysodiumsulteconcentrationby0.64.

Fig. 1

Fig. 2

Fig. 3

Instr. #5203

31LovetonCircle,Sparks,MD21152U.S.A.

800-TESTKIT(837-8548)•410-472-4340 9/16

COMPONENTS:

1 x 5212C Instruction

1 x 9198O Sample Tube, Graduated (25 mL) w/ cap & orange dot, plastic

1 x R-0630-C Chromate Indicator, 2 oz, DB

1 x R-0638O-A Phenolphthalein Indicator, .75 oz w/ orange cap, DB

1 x R-0706-C Silver Nitrate Reagent, 2 oz, DB

1 x R-0736O-C Sulfuric Acid .6N, 2 oz w/ orange cap, DB

TO ORDER REPLACEMENT PARTS AND REAGENTS CALL TOLL-FREE

800-TEST KIT (800-837-8548).

PROCEDURE:

CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS.

KEEP REAGENTS AWAY FROM CHILDREN.

NOTE: When dispensing reagents from dropper bottles, always hold bottle in a

vertical position.

Chloride Test

NOTE: Whensultecontentofsamplewatertobetestedexceeds10ppm,the

sulteshouldbeoxidizedtopreventinterferenceintest.A25mLsample

isrstadjustedtotheappropriatepH,then1mL(or25drops)ofR-0649

Hydrogen Peroxide Solution (sold separately) is added and thoroughly

mixed.Continuewiththerestoftheprocedure.

1.Rinseandll25mLsampletube(#9198O)to25mLmarkwithwatertobetested.

2.Add2dropsR-0638OPhenolphthaleinIndicator.Ifsampleturnspink(Fig.1),add

R-0736OSulfuricAcid.6Ndropwise,swirlingaftereachdrop,untilcolorchanges

frompinktocolorless.Ifsampleiscolorless,proceedtoStep3.

DROP TEST

CHLORIDE (1 drop = 10 ppm)

3.Add5dropsR-0630ChromateIndicator.Swirltomix.Samplewillturnyellow

(Fig.2).

4.AddR-0706SilverNitrateReagentdropwise,swirlingandcountingaftereach

drop,untilcolorchangesfromyellowtoamilkysalmon(brick)red(Fig.3).

NOTE: DonotaddenoughR-0706SilverNitrateReagenttogiveabrowncolor.

Firstchangefromyellowtoamilkysalmon(brick)redistheendpoint.

5.MultiplydropsofR-0706SilverNitrateReagentby10.Recordaspartsper

million(ppm)chloride.

Fig. 1

Fig. 2

Fig. 3

Instr. #5212C

31LovetonCircle,Sparks,MD21152U.S.A.

800-TESTKIT(837-8548)•410-472-4340 9/16

COMPONENTS:

1 x 5213 Instruction

1 x 9198G Sample Tube, Graduated (25 mL) w/ cap & green dot, plastic

1 x R-0638G-A Phenolphthalein Indicator, .75 oz w/ green cap, DB

1 x R-0645-C Total Alkalinity Indicator, 2 oz, DB

1 x 0736G-C Sulfuric Acid .6N, 2 oz w/ green cap, DB

TO ORDER REPLACEMENT PARTS AND REAGENTS CALL TOLL-FREE

800-TEST KIT (800-837-8548).

PROCEDURE:

CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS.

KEEP REAGENTS AWAY FROM CHILDREN.

NOTE: When dispensing reagents from dropper bottles, always hold bottle in a

vertical position.

P/T Alkalinity Test

1.Rinseandll25mLsampletube(#9198G)to25mLmarkwithwatertobetested.

NOTE: Forresultsingrainspergallon(gpg),llto14.6mLmark.

2.Add3dropsR-0638GPhenolphthaleinIndicator.Swirltomix.Samplewillturnpink

(Fig.1)ifPalkalinityispresent—proceedtoStep3.Ifsampleiscolorless,proceed

toStep4.

DROP TEST

P/T ALKALINITY (1 drop = 50 ppm)

3.AddR-0736GSulfuricAcid.6Ndropwise,swirlingandcountingaftereachdrop,

untilcolorjustchangesfrompinktocolorless.RecorddropsasPreading.

4.Add5dropsR-0645TotalAlkalinityIndicator.Swirltomix.Samplewillturngreen

(Fig.2).

5.AddR-0736GSulfuricAcid.6Ndropwise,swirlingandcountingaftereachdrop,

untilcolorchangesfromgreentored(Fig.3).Recordtotaldrops(Steps3&5)as

T reading.

6.Multiply P reading by 50. Record as parts per million (ppm) P alkalinity as

calcium carbonate. Multiply T reading by 50. Record as ppm T alkalinity as

calciumcarbonate.

NOTE: For14.6mLsample,multiplyPreadingby5.Recordasgrainspergallon

(gpg)Palkalinityascalciumcarbonate.MultiplyTreadingby5.Recordas

gpgTalkalinityascalciumcarbonate.

Fig. 1

Fig. 2

Fig. 3

Instr. #5213

31LovetonCircle,Sparks,MD21152U.S.A.

800-TESTKIT(837-8548)•410-472-4340 9/16

Taylor Technologies K-1640 Owner's manual

Taylor Technologies K-1640 Owner's manual

Taylor Technologies K-1640 Owner's manual

Related papers

Other documents