Furinno FR18047 Operating instructions

Type
Operating instructions

This manual is also suitable for

FR18047
Furinno Wall Floating Corner Shelf
its Space. its Budget
www.furinno.com
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth.
Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
x 2
20 min
NO HARDWARE LIST
1
C/B SCREW
2
SCREW COVER
3
Tools Required
16pcs
QTY
10pcs
WALL PLUG
4pcs
PAGE 1/2FR1804720180608
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
. Thank you for selecting Furinno!
PARTS LIST
NO
QTY
A
B
C
TOP PANEL /
BOTTOM PANEL
2pcs
3pcs
SHELF PANEL
CENTER PANEL
2pcs
A
A
B
B
B
C
C
PAGE 2/2
ASSEMBLY INSTRUCTION
x 2
STEP 1
1.1 - ATTACH PANELS (A, B & C) USING SCREWS (1), AS SHOWN.
1.2 - PLACE THE ASSEMBLED UNIT TO THE WALL CORNER YOU WANT TO FIT, THEN USE MARKER
PEN TO MARK UP, AS SHOWN.
1.3 - DRILL HOLES ON YOUR MARKERED AND INSTALL WALL PLUG (3), AS SHOWN.
1.4 - ATTACH THE ASSEMBLED UNIT TO THE WALL PLUG (3) USING SCREWS (1), AS SHOWN.
1.5 - ATTACH SCREW COVER (2) TO SCREWS 'S HEAD, AS SHOWN.
1
* Mark up the point
to the wall.
1/4" Drill
3
1
STEP 1.1
STEP 1.3
STEP 1.4
* Mark up the point
to the wall.
STEP 1.2
2
STEP 1.5
B
A
C
C
Finished
Edge
Finished
Surface
Finished
Surface
Finished
Surface
B
B
A
Finished
Surface
Finished
Edge
Finished
Edge
Finished
Edge
  • Page 1 1
  • Page 2 2

Furinno FR18047 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI