2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Dishwashers
  6. Beko
  7. DEN28320XDEN28320
DEN28320XDEN28320

Beko DEN28320XDEN28320, DIN15210 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Beko DEN28320XDEN28320 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.beko.com.tr
DIN15210
EN
Document Number :
15 0227 0100_EL_BEKO_F6_EN/ 27-12-16.(14:47)
Dishwasher
User’s Manual
www.beko.com.tr
DIN15210
EN
Document Number :
15 0227 0100_EL_BEKO_F6_EN/ 27-12-16.(14:47)
Dishwasher
User’s Manual
Explanation of symbols
Throughout ths User Manual the followng symbols are used:
C
Important nformaton or useful
hnts about usage.
A
Warnng for hazardous
stuatons wth regard to lfe and
property.
B
Warnng for electrc shock.
Packagng materals of the
product are manufactured
from recyclable materals n
accordance wth our Natonal
Envronment Regulatons.
Do not dspose of the packagng materals together wth the domestc or other
wastes. Take them to the packagng materal collecton ponts desgnated by the local
authortes.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product whch has been manufactured
wth hgh qualty and state-of-the-art technology. Therefore, please read ths entre
user manual and all other accompanyng documents carefully before usng the product
and keep t as a reference for future use. If you handover the product to someone else,
gve the user manual as well. Follow all warnngs and nformaton n the user manual.
Remember that ths user manual s also applcable for several other models. Dfferences
between models wll be dentfed n the manual.
This product was manufactured using the latest technology in environmentally friendly conditions.
Explanation of symbols
Throughout ths User Manual the followng symbols are used:
C
Important nformaton or useful
hnts about usage.
A
Warnng for hazardous
stuatons wth regard to lfe and
property.
B
Warnng for electrc shock.
Packagng materals of the
product are manufactured
from recyclable materals n
accordance wth our Natonal
Envronment Regulatons.
Do not dspose of the packagng materals together wth the domestc or other
wastes. Take them to the packagng materal collecton ponts desgnated by the local
authortes.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product whch has been manufactured
wth hgh qualty and state-of-the-art technology. Therefore, please read ths entre
user manual and all other accompanyng documents carefully before usng the product
and keep t as a reference for future use. If you handover the product to someone else,
gve the user manual as well. Follow all warnngs and nformaton n the user manual.
Remember that ths user manual s also applcable for several other models. Dfferences
between models wll be dentfed n the manual.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety .......................................4
Intended use ..........................................4
Children’s safety .................................... 5
Disposing of packaging material ........5
Transportation of the product ............5
Compliance with WEEE Directive and
Disposing of the Waste Product .........6
Compliance with RoHS Directive ........6
Package information ............................6
2 DISHWASHER 7
Overview ................................................7
Condensing Drying System .................8
Technical specications .......................8
3 INSTALLATION 9
Appropriate installation location .......9
Connecting water supply .....................9
Connection to the drain .................... 10
Adjusting the feet .............................. 10
Electrical connection ......................... 10
This appliance must be earthed .......11
Fitting a dierent plug .......................11
Initial use ..............................................11
4 PREPARATION 12
Tips for energy saving ........................12
Water softening system ....................12
Adjusting the water softening
system ..................................................12
Adding salt ...........................................12
Water hardness & regeneration
settings .................................................13
Adding detergent ................................15
Tablet detergents ...............................16
Cutlery basket .................................... 20
Height setting with empty basket .. 20
Collapsible lower basket tines ..........21
Upper basket height adjustable
rack ........................................................21
5 OPERATING THE PRODUCT 22
How to cancel the washing
programme .......................................... 23
How to change the washing
programme .......................................... 23
Half Load Function ............................ 23
Tablet Detergent Function ............... 23
Time Delay .......................................... 23
Warning Sound and Inner Illumination
Settings (Depends on model) .......... 24
6 MAINTENANCE AND
CLEANING 26
Cleaning the outer surface of the
product ................................................ 26
Cleaning the interior of the machine 26
Cleaning the lters ............................ 26
Cleaning the hose lter ......................27
Cleaning the impellers .......................27
Lower impeller .....................................27
Upper impeller .................................... 28
7 TROUBLESHOOTING 29
8 GUARANTEE 34
4
Dishwasher / User’s Manual
/38 EN
Instructions for safety and envIronment
1
Ths secton contans safety
nstructons that wll help to
gve protecton from rsk of
personal njury or property
damage. Falure to follow
these nstructons shall vod all
warrantes.
General safety
• Never place the product
on a carpet-covered floor;
otherwse, lack of arflow
beneath the product wll
cause electrcal parts to
overheat. Ths wll cause
problems wth your product.
• Do not operate the product
f the power cable / plug s
damaged! Call the Authorsed
Servce Agent.
• Connect the product to a
grounded outlet protected
by a fuse complyng wth
the values n the “Techncal
specfcatons” table. Do
not neglect to have the
groundng nstallaton made
by a qualfed electrcan.
Our company shall not be
lable for any damages that
wll arse when the product
s used wthout groundng
n accordance wth the local
regulatons.
• The water supply and
dranng hoses must be
securely fastened and reman
undamaged.
• Unplug the product when not
n use.
• Never wash the product by
spreadng or pourng water
onto t! There s the rsk of
electrc shock!
• Never touch the plug wth
wet hands! Never unplug by
pullng on the cable, always
pull out by grabbng the plug.
• The product must
be unplugged durng
nstallaton, mantenance,
cleanng and reparng
procedures.
• Always have the repar
procedures carred out by the
Authorsed Servce Agent.
Manufacturer shall not be
held lable for damages that
may arse from procedures
carred out by unauthorsed
persons.
• Never use chemcal solvents
n the product. They brng
forth the rsk of exploson.
• When you pull the upper
and lower baskets out
completely, the door of the
product wll bear all the
weght of the baskets. Do not
put other loads on the door;
otherwse, the product may
tlt.
• Never leave the door of
the product open apart
from loadng and unloadng
procedures.
• Do not to open the door
of the product when t s
runnng unless necessary.
Be careful for the rush of
hot steam when you need to
open the door.
Dishwasher / User’s Manual
5 / 38
EN
Instructions for safety and envIronment
Intended use
• Ths product has been
desgned for domestc use.
• It must be used to do the
domestc type dshes only.
• Ths applance s ntended
to be used n household and
smlar applcatons such as:
- Staff ktchen areas n shops,
offces and other workng
envronments.
• Only dshwasher safe
detergents, rnse ads and
addtves must be used.
• The manufacturer waves
any responsblty arsen
from ncorrect usage or
transportaton.
• Ths applance can be used by
chldren aged from 8 years
and above and persons wth
reduced physcal,sensory
or mental capabltes or
lack of experence and
knowledge f they have
been gven supervson or
nstructon concernng use
of the applance n a safe
way and understand the
hazards nvolved. Chldren
shall not play wth the
applance. Cleanng and user
mantenance shall not be
made by chldren wthout
supervson.
Children’s safety
• Electrcal products are
dangerous for the chldren.
Keep chldren away from the
product when t s n use. Do
not let them to tamper wth
the product.
• Do not forget to close the
door of the product when
leavng the room where t s
located.
• Store all detergents and
addtves n a safe place
away from the reach of the
chldren.
Disposing of packaging
material
Packagng materals are
dangerous to chldren. Keep
packagng materals n a safe
place away from reach of the
chldren.
Packagng materals of the
product are manufactured from
recyclable materals. Dspose
of them properly and sort n
accordance wth recycled waste
nstructons. Do not dspose
of them wth normal domestc
waste.
Transportation of the
product
A
If you need to move the
product, do t n uprght
poston and hold from
the rear sde. Tltng the
product onto ts front
sde may cause the
electronc parts n t get
wet and damaged.
6
Dishwasher / User’s Manual
/38 EN
Instructions for safety and envIronment
1. Unplug the product before
transportng t.
2. Remove water dranage and
water supply connectons.
3. Dran the remanng water n
the product completely.
Compliance with WEEE
Directive and Disposing
of the Waste Product
Ths product comples wth
EU WEEE Drectve
(2012/19/EU). Ths product
bears a classfcaton
symbol for waste electrcal and
electronc equpment (WEEE).
Ths product has been
manufactured wth hgh qualty
parts and materals whch can be
reused and are sutable for
recyclng. Do not dspose of the
waste product wth normal
domestc and other wastes at the
end of ts servce lfe. Take t to
the collecton center for the
recyclng of electrcal and
electronc equpment. Please
consult your local authortes to
learn about these collecton
centers.
Compliance with RoHS
Directive
The product you have purchased
comples wth EU RoHS Drectve
(2011/65/EU). It does not contan
harmful and prohbted materals
specfed n the Drectve.
Package information
Packagng materals of the
product are manufactured
from recyclable materals n
accordance wth our Natonal
Envronment Regulatons. Do
not dspose of the packagng
materals together wth the
domestc or other wastes. Take
them to the packagng materal
collecton ponts desgnated by
the local authortes.
Dishwasher / User’s Manual
7 / 38
EN
Dishwasher
2
Overview
1.
Upper mpeller
2.
Lower basket
3.
Lower mpeller
4.
Ratng Label
5.
Control panel
6.
Door
7.
Detergent dspenser
8.
Flters
9.
Cutlery basket
10.
Salt reservor ld
11.
Upper basket ral
12.
Upper basket
8
Dishwasher / User’s Manual
/38 EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
Ths product comples wth the followng EU drectves;
Development, producton and sales stages of ths product comply wth the safety
rules ncluded n all pertanng European Communty regulatons.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power nput 220-240 V, 50 Hz (see ratng label)
Total power consumpton 1800-2100 W (see ratng label)
Heater power consumpton 1800 W (see ratng label)
Total current (depends on the model) 10 A (see ratng label)
Dran pump power consumpton 30 W (see ratng label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm = 0.01-1.0
Mpa)
C
Techncal specfcatons may be changed wthout pror notce to mprove the
qualty of the product.
C
Fgures n ths manual are schematc and may not match the product exactly.
C
Values stated on the markngs of the product or n the prnted documents
accompanyng the product are obtaned n the laboratory on bass of the
relevant standards. Dependng on operatonal and envronmental condtons of
the product, these values may vary.
Note for test nsttutons:
Data requred for performance tests shall be provded upon request. Requests can be
e-maled to the followng address:
dshwasher@standardloadng.com
Do not forget to provde the code, stock and seral numbers of the product to be tested n
your request e-mal along wth your contact nformaton. Code, stock and seral numbers of
the product may be found on the type label attached to the sde wall of the door.
Dishwasher / User’s Manual
9 / 38
EN
3
Installation
To make the product ready for use,
make sure that the electrcty, tap water
supply and water dranage systems are
approprate before callng the Authorsed
Servce Agent. If they are not, call a
qualfed techncan and plumber to have
any necessary arrangements carred out.
C
Preparaton of the locaton
and electrcal, tap water and
waste water nstallatons at the
place of nstallaton s under
customer's responsblty.
B
Manufacturer shall not be held
responsble for damages arsng
from processes carred out by
unauthorsed persons.
A
Pror to nstallaton, vsually
check f the product has any
defects on t. If so, do not have
t nstalled. Damaged products
cause rsks for your safety.
C
Make sure that the water nlet
and dscharge hoses are not
folded, pnched or crushed
whle pushng the product nto
ts place after nstallaton or
cleanng procedures.
When placng the product, pay attenton
not to damage the floor, walls, ppng, etc.
Do not hold the product from ts door or
panel to move t.
Appropriate installation
location
• Place the product on a sold and flat
floor that has suffcent load carryng
capacty! The product must be
nstalled on a flat surface n order for
the door to be closed comfortably and
securely.
• Do not nstall the product at places
where temperature may fall below
0ºC.
• Place the product on a rgd floor. Do
not place t on a long ple rug or smlar
surfaces.
B
Ensure the power cable does
not get trapped under the
product.
• Make sure that you select a locaton
that wll allow you to load and unload
the dshes n a fast and comfortable
manner.
• Install the product n a place close
to the tap and the dran. Select the
nstallaton locaton by consderng
that t wll not be changed after the
connectons are made.
Connecting water supply
• Do not use old or used water nlet
hose on the new product. Use the new
water nlet hose suppled wth the
product.
• Connect the water nlet hose drectly
to the cold water tap. Permtted water
temperature up to 25°C. Pressure
comng from the tap should be
mnmum 0.3 and maxmum 10 bars.
If the water pressure exceeds 10
bars, a pressure relef valve should be
nstalled n between.
• Open the tap completely after makng
the connectons to check for water
leaks.
10
Dishwasher / User’s Manual
/38 EN
Installation
A
For your safety, close the water
nlet tap completely after the
washng programme s over.
Connection to the drain
Water dscharge hose can drectly be
connected to the dran hole or snk’s
dranage. The length of ths connecton
must be mn. 50 cm and max. 100 cm from
the floor. A dscharge hose longer than 4
meters wll cause washng performance
to be affected.Attach the water dscharge
hose to the dranppe wthout bendng
t. Tghtly fx the water dscharge hose
to the dranppe n order to prevent any
dslocaton of the water dscharge hose
durng operaton of the product.
min
300
min
120
max 1000
min 500
the product as llustrated n the relevant
secton.
Electrical connection
Before you nsert the plug nto the wall
socket make sure that the voltage and
the frequency shown n the ratng label
corresponds to your electrcty supply.
We recommend that ths applance be
connected to the mans supply va a
sutable swtched and fused socket n a
readly accessble poston.
If the supply cord or the mans lead s
damaged please do not replace t yourself.
The supply cord or the mans lead must be
replaced by a Authorsed Servce Agent or a
smlarly qualfed person.
C
Dranppe must be connected
to the foul water system and t
should not be connected to any
surface water dran.
Adjusting the feet
If the door of the product cannot be closed
properly or f the product wobbles when
you push t slghtly, then you need to adjust
the feet of the product. Adjust the feet of
Dishwasher / User’s Manual
11 / 38
EN
Installation
termnal n the plug marked ‘L’ or
coloured red.





Wth the alternatve plugs a 13A fuse must
be ftted ether n the plug or adaptor or
n the man fuse box. If n doubt contact a
qualfed electrcan.
Initial use
Before startng to use the product, make
sure that all preparatons are made n
accordance wth the nstructons n
sectons “Important safety nstructons”
and “Installaton”.
• Before usng the product, fll the salt
reservor wth 1 ltre of water, add salt
(see next page) and str to dssolve.
Run the Dshwasher wthout dshes
on a short programme wth a small
amount of detergent.
A
There mght be a small amount
of water left n the product
after factory qualty control
tests. Ths causes no harm to
the product.
A
This appliance must
be earthed
If the ftted moulded plug s not
sutable for your socket, then
the plug should be cut off and
an approprate plug ftted.
Destroy the old plug, whch s
cut off as a plug wth a bared
cord could cause a shock
hazard f nserted nto a socket
elsewhere n the house.
The moulded plug on ths
applance ncorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same ratng
must be used. Do not forget
to reft the fuse cover. In the
event of losng the fuse cover,
the plug must not be used
untl a replacement fuse cover
has been ftted. Colour of the
replacement fuse cover must
be the same colour as that
vsble on the pn face of the
plug. Fuse covers are avalable
from any good electrcal store.
Fitting a dierent plug
As the colours of the wres n the mans
lead of ths applance may not correspond
wth the coloured markngs dentfyng the
termnals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wre to the termnal n the plug
marked ‘E’ or wth the symbol or
coloured green and yellow or green.
2. Connect the blue (neutral) wre to
the termnal n the plug marked ‘N’ or
coloured black.
3. Connect the brown (lve) wre to the
12
Dishwasher / User’s Manual
/38 EN
Preparation
4
Tips for energy saving
Followng nformaton wll help you use
the product n an ecologcal and energy-
effcent manner.
Wpe away any coarse food remnants on
the dshes before puttng them n the
product. Operate the product after fllng t
completely. When selectng a programme,
consder the table of “Programme data and
average consumpton values”.
Do not put more detergent than suggested
on the detergent package.
Water softening system
C
Your dshwasher requres soft
water. If the hardness of the
water s above 6°dH, the water
must be softened and descaled.
Otherwse, ons that create
the hardness wll accumulate
on the surfaces of the dshes
and may adversely affect the
washng, shnng and dryng
performances of the product.
The product s equpped wth a water
softenng system whch reduces the
hardness of ncomng water. Ths system
softens the supply water that enters
nto the product to a level that wll allow
washng the dshes wth the requred
qualty.
Adjusting the water
softening system
Washng performance wll ncrease when
water softenng system s adjusted
properly.
Adjust the new water hardness level
accordng to the Water hardness level
nstructon n ths booklet.
Water hardness &
regeneration settings
The dshwasher requres lme free water.
Hard water leaves watermarks on your
dshes. Your dshwasher has a specal
water softenng system to remove the
hardness of the tap water. Settng ths
system correctly wll ncrease the washng
effectveness.
To fnd out the hardness level of water n
your area, contact your local Water Board or
Determne water hardness level by the help
of test strp provded.
If you move to a different location,
the level of water hardness will
possibly be different. It is essential to
reset the water hardness in order to
obtain optimum washing efficiency.
Dishwasher / User’s Manual
13 / 38
EN
Preparation
Test Strip
Let the water
flow from your
tap for 1 minute.
Remove the
test strip from
its packing.
Fill a glass with
tap water and
dip the test strip
into water for 1
second.
Take the test strip
out of the water and
shake it.
Hold for
1 minute.
Set the water hardness level of your dishwasher
according to the result shown by the test strip.


No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
To Adjust the Water Hardness
1. Turn on the machne by pressng On / Off key whle pressng and holdng the
Programme Selecton key when the machne s n off poston. Press and hold the
programme key untl the water hardness level stored on your machne s dsplayed n
the program ndcator. Start / Pause ndcator wll start flashng once the stored water
hardness settng s dsplayed.
2. By usng Programme Selecton key, adjust water hardness level accordng to the
hardness of the supply water. See “Water hardness level adjustment table” for correct
settng.
3. Select the water hardness level sutable to your machne from the Water Hardness
Level Adjustment Table by pressng the Delayed Start Key.
4. Press «Start/Pause/Cancel» key for once to store the level you have selected.
5. Start / Stop con wll lght contnuously when the new water hardness level s stored.
6. Press the On/Off button to turn off your machne.
Water Hardness Level Adjustment Table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF*
Water Hardness Level Indicator
1
st
Level
0-5 0-4 0-8
Press the Programme Selection button to set the water hardness
level to P1 position.
2
nd
Level
6-9 5-7 9-13
3
rd
Level
10-15 8-12 14-22
Press the Programme Selection button to set the water hardness
level to P2 position.
4
th
Level
16-19 13-15 23-27
Press the Programme Selection button to set the water hardness
level to P3 position.
5
th
Level
20-24 16-19 28-34
Press the Programme Selection button to set the water hardness
level to P4 position.
6
th
Level
25-62 20-50 35-90
Press the Programme Selection button to set the water hardness
level to P5 position.
If the hardness level of the water that you use s above 90 °dF (French standard for water
hardness) or f you are usng well water, than t s recommended to use flter and water
purfcaton devces.
14
Dishwasher / User’s Manual
/38 EN
Preparation
* If the hardness level of the water that
you use s below 8°dF (French standard
for water hardness), there s no need to
use salt n your dshwasher. If ths s the
case, “No Salt Warnng Indcator” (f any)
llumnates contnuously on the panel of
your machne.
If the water hardness adjustment s set to
level 1, the “No salt warnng ndcator” wll
llumnate contnuously although t s not
necessary to use salt. If you use salt under
ths condton, salt wll not be consumed
and the lamp wll not llumnate.
C
If you move your house, t
s very mportant to make
the water hardness level
adjustment of your machne
accordng to the new locaton
you move n order to preserve
the washng effcency.
If the water hardness level
of your machne s adjusted
prevously, your machne wll
dsplay the last water hardness
level adjustment. Adjust the
new water hardness level of
your machne on bass of the
water hardness level of your tap
water.
Adding salt
Water softenng system needs to be
regenerated n order that the product
operates wth the same performance
contnuously. Dshwasher salt s used for
ths purpose.
C
Use only specal softenng salts
produced partcularly for the
dshwashers n your machne.
C
We recommend usng granular
or powder softenng salts. Do
not use salts that are nsoluble
n water such as table salt or
common salt. Performance of
water softenng system may
get worse n tme.
C
Salt reservor wll fll wth water
when you start the product.
Therefore, add the softenng
salt before startng the
machne.
1. Frst take the lower basket out to add
softenng salt.
2. Turn the salt reservor ld counter
clockwse to open t (A, B).
C
Salt reservor wll fll wth water
when you start the product.
Therefore, add the softenng
salt before startng the
machne.
Dishwasher / User’s Manual
15 / 38
EN
Preparation
C
Snce dfferent salt brands
n the market have dfferent
partcle szes and snce the
water hardness may vary,
dssoluton of the salt n water
may take a couple of hours.
Therefore, Salt Indcator
remans on for a whle after
addng salt nto the machne.
Loose salt grans can cause rust
marks n your machne f not
rnsed away. Only fll salt just
before a programme s run.
Detergent
You can use powder, lqud/gel and tablet
detergents n the machne.
C
Only use the detergents
produced partcularly for use
wth dshwashers. Never
use washng up lquds. We
recommend you not to use
detergents that contan
chlorne and phosphate as
they are harmful for the
envronment.
Adding detergent
C
Refer to the “Programme
Table” to determne the correct
amount of detergent for the
selected programme.
C
In order to have good washng
and dryng results, always
follow the nstructons on the
detergent packagng. If you
have further questons, we
recommend to contact wth the
producer of the detergent.
C
Before ntal use, fll the water
softenng system wth 1 ltre of
water (C).
3. Fll the salt reservor wth salt by usng
salt funnel (D). To speed up dssoluton
rate of salt n water, str t wth a
spoon.
C
You can put about 2 kg of
dshwasher salt nto the salt
reservor.
4. Replace the ld and tghten t securely
when the reservor s full.
5. If you wll not start a washng
programme mmedately after addng
the salt, run the machne empty n the
shortest programme to dssolve and
wash away the scattered salt n the
machne.
16
Dishwasher / User’s Manual
/38 EN
Preparation
C
If dshes have been watng
for a long tme and have
dred resdues, fll the 5 cm
compartment too (2).
3. Close the detergent dspenser ld by
pressng on t lghtly. A “clck” wll be
heard when the ld s closed.
C
In programmes wth prewash
and hgh temperature, n whch
you use tablet detergents,
make sure that the detergent
dspenser ld s closed frmly.
C
Use powder detergent n short
programmes wthout prewash
snce the solublty of the tablet
detergent changes dependng
on the temperature and tme.
A
Excessve usage of powder
detergents wll cause the
detergent not dssolve
completely and wll also cause
scratches on the glassware.
A
Do not put solvents nto the
detergent dspenser. There s
rsk of exploson!
Put the detergent nto the detergent
dspenser just before operatng the
machne as llustrated below.
1. Push the latch to rght to open the
detergent dspenser ld (A).
2. Put suggested amount of powder,
lqud/gel or tablet detergent n the
dspenser.
C
Insde the detergent dspenser,
there are level markngs that
help you use approprate
amount of detergent. When
brmful, detergent dspenser
wll contan 40 cm of
detergent. Fll detergent up to
15 cm or 25 cm level marks
n the detergent dspenser
accordng to fullness of the
machne and/or solng degree
of the dshes (1).
Dishwasher / User’s Manual
17 / 38
EN
Preparation
C
Dependng on the model,
salt ndcator and/or rnse ad
ndcator must be enabled agan
f they were dsabled before.
Rinse aid
C
The rnse ad used n
dshwashers s a specal
combnaton used to ncrease
dryng effcency and prevent
water or lmescale stans on the
washed tems. For ths reason,
care must be pad to have rnse
ad n the rnse ad reservor
and to use rnse ads produced
specally for dshwashers only.
1. Open the ld of the rnse ad reservor
by pressng ts latch (B).
2. Fll the reservor untl “MAX” level.
3. Turn the rnse ad amount adjuster
manually to a poston between 1 and
Combined tablet detergents
Combned tablet detergents exhbt water
softenng and / or rnse ad effect n addton
to detergent effect. Some types of these
detergents also contan specal-purpose
washng chemcals such as glass and
stanless steel protectors.
Combned tablet detergents are avalable
as 3n1, 5n1, Alln1 etc. They functon only
up to a specfc degree of water hardness.
Above ths lmt regeneraton salt and rnse
ad must be added. Refer to the nstructons
on the packagng of the combned detergent
whether t s sutable for the hardness level
of the water supply.
C
Whle usng combned tablet
detergents contact wth
the detergent producers f
the dshes are wet and/or f
you notce lmescale spots
partcularly on glasses after the
washng programme s over.
C
The best washng performance
n dshwashers s obtaned
by usng detergent, rnse
ad and water softenng salt
ndvdually.
When you swtch to powder, lqud/gel or
tablet detergent from a combned tablet
detergent:
1. Make sure that salt and rnse ad
reservors are full.
2. Set the water hardness to the hghest
level and perform an empty run.
3. After the empty washng cycle, revew
the user manual and readjust the water
hardness level so as to sut the water
supply.
4. Make the approprate rnse ad settngs.
18
Dishwasher / User’s Manual
/38 EN
Preparation
6 (4). If there are stans on tableware
tems after washng, level must be
ncreased and f there s a blue trace
after wpng them by hand, t must be
decreased. Ths s set to poston 4 as
factory default.
4. Close the ld of the reservor by
pressng on t lghtly.
C
Wpe clean any splled rnse ad
outsde the reservor. Rnse
ad that splled accdentally
wll cause foamng and t wll
eventually decrease washng
performance.
Items not sutable for washng n
the dshwasher
• Never wash dshes soled by cgarette
ash, candle remnants, polsh, dyestuff,
chemcals, etc. n your dshwasher.
• Do not wash ron alloy tems n the
dshwasher. It can get corroded or
leave stans on other tems.
• Do not wash cutlery wth wooden or
bone stems, glued peces, or peces
that are not resstant to heat, as well
as copper and tn-plated contaners n
the dshwasher.
C
Decoratve prnts of chnaware
as well as alumnum and slver
tems may get dscoloured
or tarnshed after washng
n the dshwasher just as t
happens n handwashng as
well. Some delcate glass types
and crystals may become dull n
tme. We strongly recommend
you to check f the tableware
you are gong to purchase s
sutable for washng especally
n the dshwasher.
Placng the dshes nto the
dshwasher
You can use your dshwasher n the
optmum way wth respect to energy
consumpton and washng and dryng
performance only f you place the dshes n
an orderly way.
• Wpe away any coarse food
remnants (bones, seeds, etc.) on the
dshes before placng them n the
dshwasher.
• Place thn, narrow peces n the mddle
sectons of baskets f possble.
• There are two separate baskets n
whch you can place your dshes n the
dshwasher. Place the heavly soled
and bgger tems n the lower basket
and smaller, delcate and lght tems n
the upper basket.
• Place the hollowed dshes such as
bowls, glasses and pans upsde down
n the dshwasher. Thus, accumulaton
of water n deep hollows s prevented.
A
To prevent possble njures,
always place the sharp and
ponted dshes such as servce
fork, bread knfe, etc. upsde
down so as ther ponted ends
wll face down or they wll le
horzontally n the dsh basket.
Unload dshes n the lower basket frst and
then the dshes n the upper basket.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/