A 1PC B 2PCS C 1PC D 1PC
E 8PCS F 8PCS G 8PCS H 1PC
φ5/16"×45㎜ φ8㎜ φ22㎜ 5MM
ATTENTION:
WHEN YOU ASSEMBLE, PLEASE DO NOT TIGHTEN EACH
SCREW UNTIL ALL SCREWS ARE LINED UP WITH THE FRAME.
Front Leg
Left back Leg
Right back Leg
Insert front leg (B) into the
bottom of seat frame (A).
Use washers and bolts to
tighten up using tool (H).
Insert Right back leg
(D) into bottom of
seat frame (A). Use
washer and bolts to
tighten up using tool
(H).
Do this same process
for Left back leg (C).