Toto MW634584CEFG#01 Installation guide

Type
Installation guide

Toto MW634584CEFG#01 is a high-efficiency one-piece toilet with a 1.28 GPF/4.8 LPF Tornado Flush system, providing a powerful and water-saving flush. Its CeFiONtect glaze prevents debris from sticking to ceramic surfaces, making it easy to clean. The toilet features a Universal Height and an elongated front bowl for added comfort, and its high-profile tank adds a touch of elegance to your bathroom. The included Washlet S350e Connect+ offers auto open/close lid, providing hands-free convenience.

Toto MW634584CEFG#01 is a high-efficiency one-piece toilet with a 1.28 GPF/4.8 LPF Tornado Flush system, providing a powerful and water-saving flush. Its CeFiONtect glaze prevents debris from sticking to ceramic surfaces, making it easy to clean. The toilet features a Universal Height and an elongated front bowl for added comfort, and its high-profile tank adds a touch of elegance to your bathroom. The included Washlet S350e Connect+ offers auto open/close lid, providing hands-free convenience.

MODELS
CST634CEFGT20 - With CeFiONtect glaze
MW634584CEFG
Supreme
®
II Connect+™ Toilet, 1.28GPF
with Washlet
®
S350e Connect+
FEATURES
Concealed supply connection for seamless installation
High-efficiency Tornado Flush
TM
(1.28GPF/4.8LPF)
CeFiONtect
TM
glaze prevents debris from sticking
to ceramic surfaces for easy cleaning
Universal Height
Elongated front bowl
Decorative one-piece design with high-profile tank
Chrome trip lever
12" Rough-in, less supply
Auto open/close lid
See Spec sheet SW584T20 for Washlet features
PRODUCT SPECIFICATION
The one-piece high-efficiency Tornado Flush toilet
shall be 1.28GPF/4.8LPF. Universal Height Toilet with
CeFiONtect glaze finish. Toilet shall have high-profile
tank, elongated front bowl and chrome trip lever.
Toilet shall be TOTO Model CST634CEFGT20#01.
See TOTO Specification sheet SW584T20 for details
on required Washlet.
COLORS/FINISHES
Standard
#01 Cotton
REQUIRED WASHLET CONNECT+
SW584T20 Washlet
®
S350e Connect+
Fits TOTO Connect+ toilet bowl models only
CeFiONtect
Tornado Flush
CODES/STANDARDS
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA WaterSense, State
of Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
SPECIFICATIONS
Water Use 1.28 GPF/4.8LPF
Flush System Tornado Flush
TM
Min. Water Pressure 8 psi (flowing)
Water Surface 7-1/8" x 9-1/8"
Trap Diameter 2-1/8"
• Rough-in 12"
Trap Seal 2-1/8"
Warranty One Year Limited Warranty
Material Vitreous china
Shipping Weight CST634CEFGT20 104lbs.
SW584T20 13.5lbs.
Shipping Dimensions CST634CEFGT20
29-1/2" L x 18"W
x 19-1/4" H
1
x 27-1/8" H
2
SW584T20
23"X 19-1/4" X 5-1/2"
See Spec sheet SW584T20 for Washlet details
MS634584CEFG
Supreme
®
II Connect+™ Toilet, 1.28GPF with Washlet
®
S350e Connect+
SS-01138 v.02
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
These dimensions and specications are subject to change without notice
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
12" (305mm)
*8" (203mm)
9-13/16"
(249mm)
*6" (152mm)
17-3/8"
(441mm)
25-9/16"
(650mm)
28-5/16" (720mm)
3/4" (19mm)
17-1/2" (445mm)
5-1/2" (140mm)
*SUGGESTED
DIMENSIONS
4 1/2
[117mm]
2 3/8
Diameter
12" (305mm)
*8" (203mm)
9-13/16"
(249mm)
*6" (152mm)
17-3/8"
(441mm)
25-9/16"
(650mm)
28-5/16" (720mm)
3/4" (19mm)
17-1/2" (445mm)
5-1/2" (140mm)
*SUGGESTED
DIMENSIONS
4 1/2
[117mm]
2 3/8
Diameter
* The 3-prong cord on the Washlet is on
the left side and is 3' long. The GFCI outlet
needs to have 120V, 10amps.
* GFCI Outlet
Min. 12” off floor
15-5/16"
(389mm)
18-7/8" (480mm)
(Round)
20-3/4" (529mm)
(Elongated)
3-15/16"
(100mm)
3/8"
(10mm)
1-5/8"
(42mm)
5-1/2"
(140mm)
7-1/16"
(180mm)
2-1/2"
(63mm)
7/8"
(22mm)
* The 3-prong cord on the Washlet is on
the left side and is 3' long. The GFCI outlet
needs to have 120V, 10amps.
* GFCI Outlet
Min. 12” off floor
15-5/16"
(389mm)
18-7/8" (480mm)
(Round)
20-3/4" (529mm)
(Elongated)
3-15/16"
(100mm)
3/8"
(10mm)
1-5/8"
(42mm)
5-1/2"
(140mm)
7-1/16"
(180mm)
2-1/2"
(63mm)
7/8"
(22mm)
  • Page 1 1
  • Page 2 2

Toto MW634584CEFG#01 Installation guide

Type
Installation guide

Toto MW634584CEFG#01 is a high-efficiency one-piece toilet with a 1.28 GPF/4.8 LPF Tornado Flush system, providing a powerful and water-saving flush. Its CeFiONtect glaze prevents debris from sticking to ceramic surfaces, making it easy to clean. The toilet features a Universal Height and an elongated front bowl for added comfort, and its high-profile tank adds a touch of elegance to your bathroom. The included Washlet S350e Connect+ offers auto open/close lid, providing hands-free convenience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI