Troy-Bilt TB27B EC Installation guide

Troy-Bilt
Brand
Troy-Bilt
Model
TB27B EC
Type
Installation guide

Troy-Bilt TB27B EC is a powerful and versatile blower that can help you tackle any cleanup job. With its 27cc 2-cycle engine, it delivers plenty of power to clear leaves, grass clippings, and other debris from your yard. The variable speed control allows you to adjust the airflow to suit the task at hand, and the cruise control feature lets you maintain a consistent speed without having to hold down the trigger. The TB27B EC also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Here are some of the possible use cases for the Troy-Bilt TB27B EC:

Troy-Bilt TB27B EC is a powerful and versatile blower that can help you tackle any cleanup job. With its 27cc 2-cycle engine, it delivers plenty of power to clear leaves, grass clippings, and other debris from your yard. The variable speed control allows you to adjust the airflow to suit the task at hand, and the cruise control feature lets you maintain a consistent speed without having to hold down the trigger. The TB27B EC also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Here are some of the possible use cases for the Troy-Bilt TB27B EC:

Flip the choke lever clockwise
until it clicks into the START
position.
Press the primer bulb 10 times.
!
Idle the engine for 30 seconds.
778-14339 / 00 02/18
1
3
6
IMPORTANT: READ THE OPERATOR’S MANUAL THOROUGHLY AND FOLLOW
THE SAFE OPERATION PRACTICES WHILE OPERATING THE UNIT.
Lea la traducción en Español en el manual.
NEED HELP? CALL 1-800-828-5500
40:1
Mix thoroughly in a separate fuel
can:
– 3.2 fl. oz. of 2-cycle engine oil
– 1 gallon of fresh unleaded
gasoline (less than 30 days old)
NOTE: Do not mix directly in the
unit fuel tank.
6
STARTING
NOTE: Always install the upper
blower tube.
Align the bumps on the upper
end of the upper blower tube
with the slots on the blower
outlet. Insert the upper blower
tube into the blower outlet.
While holding the handle, twist
the upper blower tube clockwise
until it locks into place.
NOTE: The nozzle and curved
lower blower tube are optional.
Align the slots on the nozzle or
curved lower blower tube with
the bumps on the lower end of
the upper blower tube. Install the
nozzle or curved lower blower
tube onto the upper blower tube.
While holding the upper blower
tube, twist the nozzle or curved
lower blower tube clockwise until
it locks into place.
The tabs on the upper blower
tube should align with the tabs
on the nozzle.
NOTE: The tabs on the upper
blower tube will not completely
align with the tabs on the curved
lower blower tube.
1 2 3
4
5
ASSEMBLY
Position the unit with the fuel cap
facing up. Slowly remove the fuel
cap. Fill the fuel tank. Reinstall
the fuel cap. Move the unit at
least 30 ft. (9.1 m) from the fuel
container and the fueling site
before starting the engine.
7
Move the cruise control to the
LO (slow) position.
NOTE: Keep the cruise control
in the LO (slow) position and
DO NOT squeeze the throttle
control until step 7.
2
Crouch in the starting position.
4
Pull the starter rope with a
controlled and steady motion
until the unit starts.
5
Squeeze and hold the throttle
control or move the cruise
control to the HI (fast) position.
7
DIDN’T START?
Repeat the starting
instructions.
If the unit still fails to start,
refer to the operator’s
manual for additional
starting and troubleshooting
information.
NOTE: This unit includes a
cruise control, which allows
the operator to maintain the
desired engine speed
without having to squeeze
the throttle control.
NO ASSEMBLY TOOLS REQUIRED
Nozzle
Fuel Cap
Primer Bulb
Choke
Lever
Starter
Rope Grip
Throttle Control
Cruise Control
Handle
Blower Outlet
Curved Lower
Blower Tube
Upper
Blower Tube
  • Page 1 1

Troy-Bilt TB27B EC Installation guide

Troy-Bilt
Brand
Troy-Bilt
Model
TB27B EC
Type
Installation guide

Troy-Bilt TB27B EC is a powerful and versatile blower that can help you tackle any cleanup job. With its 27cc 2-cycle engine, it delivers plenty of power to clear leaves, grass clippings, and other debris from your yard. The variable speed control allows you to adjust the airflow to suit the task at hand, and the cruise control feature lets you maintain a consistent speed without having to hold down the trigger. The TB27B EC also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Here are some of the possible use cases for the Troy-Bilt TB27B EC:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents