Samsung Da29-00020b-1P User manual

Type
User manual

This manual is also suitable for

Separation and Purification Sciences Division
Separation and Purification Sciences DivisionSeparation and Purification Sciences Division
Separation and Purification Sciences Division
Samsung
Gen2.1 Filter
Installation
Summary
2-22-17
2. All Rights Reserved.22 February 2017© 3M 3M Confidential.
Separation and Purification Sciences Division
Video File 1 – Checking the filter
(https://www.youtube.com/watch?v=z7_PbXCWasU)
Installed filter
HDX (generic brand)
HDX (generic brand)HDX (generic brand)
HDX (generic brand)
Replacement filter (Can NOT be installed)
Microfilter
MicrofilterMicrofilter
Microfilter Gen1
Gen1 Gen1
Gen1
Brand filter
Brand filterBrand filter
Brand filter
기존 KEY
KEYKEY
KEY
3. All Rights Reserved.22 February 2017© 3M 3M Confidential.
Separation and Purification Sciences Division
Video File 2 – Checking the filter
(https://www.youtube.com/watch?v=iCmwA1bhC8w)
Installed filter
JIFFY
JIFFY JIFFY
JIFFY (generic brand)
(generic brand)(generic brand)
(generic brand)
Replacement filter (Can NOT be installed)
3M
3M 3M
3M Gen2.1
Gen2.1 Gen2.1
Gen2.1 –
Brand filter
Brand filterBrand filter
Brand filter
4. All Rights Reserved.22 February 2017© 3M 3M Confidential.
Separation and Purification Sciences Division
SGEN 2.1 Key Lug Geometry
The key lug geometry on
older Water Sentinel
branded filters is approx.
0.060” less than the
current 3M design.
Water Sentinel & HDX
brand are made by the
same manufacturer ( TST
Water, LLC) in the USA.
The most recently
purchased HDX version
has different geometry
and is now the same
width as the 3M (Brand)
design.
3M (Brand) Design
Older HDX & Water Sentinel Design
Most Recent HDX Design
HDX Water Sentinel
5. All Rights Reserved.22 February 2017© 3M 3M Confidential.
Separation and Purification Sciences Division
SGEN 2.1 Key Lug Geometry
Fig 1:
Fig 1: Fig 1:
Fig 1: Manifold with valve in
its “home” position.
Fig 2:
Fig 2: Fig 2:
Fig 2: Removal of Water
Sentinel & HDX filter.
Fig. 3:
Fig. 3: Fig. 3:
Fig. 3: Inner valve is not
clocked back to the “home”
position due to the narrower
width of the key lug
geometry on the Water
Sentinel filter and the ability
of the new HDX keys to
deform. Both versions can
create the same condition
making it difficult to re-
install a 3M (Brand) version.
Fig. 1
Fig. 2
Fig. 3
6. All Rights Reserved.22 February 2017© 3M 3M Confidential.
Separation and Purification Sciences Division
Solutions
End user can install the old HDX branded filter and fully turn the filter counter-clockwise upon
removal to move the inner valve to its home position.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Samsung Da29-00020b-1P User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI