Assembly Instruction Sheet
Item# 372-3X
Trek Folding Kitchen Cart
Hardware
Part List
Diagram 1.
Diagram 2.
Diagram 3.
Diagram 4.
metal clip.
RF10052
Large Screw
x 4
RF40091
Casters Lock
RF40105
Casters Free
RF40105
RF40004
Plastic Peg
RF40015
Allen Key
x 2
x 1 x 1
x 2
x 1
x 2
Step 4:
- Attach the Handle (B) to the unit by using
Screws (RF10052).
- Insert the Casters Free (RF40105) into the
holes underneath the left side panel and
Caster Lock (RF40091) into the holes underneath
the right side panel as per diagram 4.
Step 1:
Unfold the table top, then place the Plastic Pegs
(RF40004) into the predrilled holes under
the table top as per diagram 1.
Step 2:
Gently lean the kitchen cart (A) against
the wall as per diagram 2.
Step 3:
Unfold the top, left and right side panels
and two shelves following the sequence
shown on diagram 3.
Make sure each shelf rests on the
metal clips on the side panels.
A
A
B
RF10052
x 4
x 2
A
Kitchen Cart
B
Handle
1
2
3
4
5
RF40004
x 2
RF40091
x 2
/
