Panasonic Network Card 2SA1739 User manual

Type
User manual

This manual is also suitable for

Panasonic Network Card 2SA1739

The Panasonic Network Card 2SA1739 is a high-speed switching transistor designed for use in various electronic devices. It is particularly suitable for applications that require low collector-emitter saturation voltage and high speed. The 2SA1739 is also packaged in a compact S-Mini type package, allowing for easy integration into space-constrained designs.

Some of the key features of the Panasonic Network Card 2SA1739 include:

  • High speed switching
  • Low collector-emitter saturation voltage VCE(sat)
  • S-Mini type package, allowing for downsizing of the equipment and automatic insertion through the tape packing

Panasonic Network Card 2SA1739

The Panasonic Network Card 2SA1739 is a high-speed switching transistor designed for use in various electronic devices. It is particularly suitable for applications that require low collector-emitter saturation voltage and high speed. The 2SA1739 is also packaged in a compact S-Mini type package, allowing for easy integration into space-constrained designs.

Some of the key features of the Panasonic Network Card 2SA1739 include:

  • High speed switching
  • Low collector-emitter saturation voltage VCE(sat)
  • S-Mini type package, allowing for downsizing of the equipment and automatic insertion through the tape packing
Transistors
1
Publication date: March 2003 SJC00027BED
2SA1739
Silicon PNP epitaxial planar type
For high speed switching
Complementary to 2SC3938
Features
High speed switching
Low collector-emitter saturation voltage V
CE(sat)
S-Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing
Absolute Maximum Ratings T
a
= 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) V
CBO
15 V
Collector-emitter voltage (Base open) V
CEO
15 V
Emitter-base voltage (Collector open) V
EBO
4V
Collector current I
C
50 mA
Peak collector current I
CP
100 mA
Collector power dissipation P
C
150 mW
Junction temperature T
j
150 °C
Storage temperature T
stg
55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base cutoff current (Emitter open)
I
CBO
V
CB
= 8 V, I
E
= 0 0.1 µA
Emitter-base cutoff current (Collector open)
I
EBO
V
CE
= 3 V, I
C
= 0 0.1 µA
Forward current transfer ratio h
FE1
*
V
CE
= 1 V, I
C
= 10 mA 50 150
h
FE2
V
CE
= 1 V, I
C
= 1 mA 30
Collector-emitter saturation voltage V
CE(sat)
I
C
= 10 mA, I
B
= 1 mA 0.1 0.2 V
Transition frequency f
T
V
CB
= 10 V, I
E
= 10 mA, f = 200 MHz 800 1
500 MHz
Collector output capacitance C
ob
V
CB
= 5 V, I
E
= 0, f = 1 MHz 1 pF
(Common base, input open circuited)
Turn-on time t
on
Refer to the switching time
12 ns
Turn-off time t
off
measurement circuit 20 ns
Storage time t
stg
19 ns
Electrical Characteristics T
a
= 25°C ± 3°C
Unit: mm
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2.
*
: Rank classification
2.1±0.1
1.3±0.1
0.3
+0.1
–0.0
2.0±0.2
1.25±0.10 (0.425)
1
3
2
(0.65)
(0.65)
0.2±0.1
0.9±0.10 to 0.1
0.9
+0.2
–0.1
0.15
+0.10
–0.05
10˚
Rank Q R No-rank
h
FE1
50 to 120 90 to 150 50 to 150
Marking symbol AXQ AXR AX
Marking Symbol: AX
Product of no-rank is not classified and have no marking symbol for rank.
1: Base
2: Emitter
3: Collector
EIAJ: SC-70
SMini3-G1 Package
This product complies with the RoHS Directive (EU 2002/95/EC).
2SA1739
2
SJC00027BED
I
C
V
CE
V
CE(sat)
I
C
V
BE(sat)
I
C
P
C
T
a
h
FE
I
C
f
T
I
E
C
ob
V
CB
Switching time measurement circuit
t
on
, t
off
Test circuit t
stg
Test circuit
508 30
51
V
BB
= 10 V
V
IN
V
CC
= 3 V
V
IN
= 9.0 VV
IN
= 5.8 V
V
BB
= Ground
V
IN
= 9.8 V
V
BB
= 8.0 V
V
OUT
0.1 µF
34
V
IN
0
0
V
OUT
V
IN
V
OUT
90%
90%
90%
10%
10%
t
stg
t
on
t
off
90%
2 k 62
51
V
BB
V
IN
V
CC
= 1.5 V
V
OUT
0.1 µF
52
0 16040 12080
0
200
160
120
80
40
Collector power dissipation P
C
(
mW
)
Ambient temperature T
a
(
°C
)
0 121082 64
0
60
50
40
30
20
10
T
a
= 25°C
300 µA
500 µA
400 µA
100 µA
200 µA
I
B
= 600 µA
Collector current I
C
(
mA
)
Collector-emitter voltage V
CE
(
V
)
1 10 100 1 000
0.01
0.1
1
10
100
I
C
/ I
B
= 10
25°C
25°C
T
a
= 75°C
Collector-emitter saturation voltage V
CE(sat)
(
V
)
Collector current I
C
(
mA
)
1 10 100 1 000
0.01
0.1
1
10
100
I
C
/ I
B
= 10
25°C
25°C
T
a
= 75°C
Collector-emitter saturation voltage V
CE(sat)
(
V
)
Collector current I
C
(
mA
)
0.1 1 10 100
0
240
200
160
120
80
40
V
CE
= 10 V
T
a
= 75°C
25°C
25°C
Forward current transfer ratio h
FE
Collector current I
C
(
mA
)
1 10 100
0
2 400
2 000
1 600
1 200
800
400
V
CB
= 10 V
f = 200 MHz
T
a
= 25°C
Transition frequency f
T
(
MHz
)
Emitter current I
E
(
mA
)
1 10 100
0
2.4
2.0
1.6
1.2
0.8
0.4
I
E
= 0
f = 1 MHz
T
a
= 25°C
Collector-base voltage V
CB
(
V
)
Collector output capacitance
(Common base, input open circuited)
C
ob
(pF)
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Panasonic Network Card 2SA1739 User manual

Type
User manual
This manual is also suitable for

Panasonic Network Card 2SA1739

The Panasonic Network Card 2SA1739 is a high-speed switching transistor designed for use in various electronic devices. It is particularly suitable for applications that require low collector-emitter saturation voltage and high speed. The 2SA1739 is also packaged in a compact S-Mini type package, allowing for easy integration into space-constrained designs.

Some of the key features of the Panasonic Network Card 2SA1739 include:

  • High speed switching
  • Low collector-emitter saturation voltage VCE(sat)
  • S-Mini type package, allowing for downsizing of the equipment and automatic insertion through the tape packing

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI