Panasonic SHWL30EC Operating instructions

SQW0709

Operating Instructions

Access Point Adaptor

Model No. SH-WL30

Thank you for purchasing Panasonic ALL series product.

Please read these instructions carefully before using this product,

and save this manual for future use.

- 2 -

Table of contents

Features ..................................................................3

Unit care ..................................................................4

Accessories .............................................................5

Control reference guide...........................................6

Connections ............................................................8

Network settings....................................................10

To make network-related settings..........................17

Firmware updates..................................................28

Troubleshooting.....................................................30

Specifications ........................................................33

How to use this manual

Click/Tap this icon to jump to “Table of contents”.

≥ Pages to be referred to are indicated as “l ±±”. You can jump to the

corresponding page by clicking/tapping this.

- 3 -

Features

This unit allows you to convert the security type of your home Wi-Fi

®

environment from WPA

TM

to WPA2

TM

.

WPAWPA

TMTM

WPA2WPA2

TMTM

Broadband router, etc.

This unit

your ALL

speakers

PC, smartphone,

etc.

- 4 -

Unit care

Clean this unit with a soft, dry cloth.

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the cloth’s instructions.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard

this unit either by disposal or transfer, then follow the procedure to return

all the settings to the factory defaults to delete the user settings.

(l 30, “To return all settings to the factory defaults.”)

≥ The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment

Only for European Union and countries with recycling

systems

This symbol on the products, packaging, and/or accompanying

documents means that used electrical and electronic products

must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take

them to applicable collection points in accordance with your national

legislation.

By disposing of them correctly, you will help to save valuable resources

and prevent any potential negative effects on human health and the

environment.

For more information about collection and recycling, please contact your

local municipality.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

- 5 -

Accessories

Check the supplied accessories before using this system.

∏ 1 AC adaptor

∏ 1 DC cable

∏ 1 LAN cable



≥ Do not use any other AC adaptors except the supplied one.

≥ The supplied DC cable is for use with this system only. Do not use it with other

equipment. Also, do not use cords from other equipment with this system.

- 6 -

Control reference guide

Top

1 Power indicator

Lights up

This unit is on.

≥ The unit is in the standby

condition when the AC adaptor

is connected. The primary

circuit is always “live” as long

as the AC adaptor is

connected to an electrical

outlet.

2 5 G indicator

Blinks/Lights up

The 5 GHz band (11n/a) is

available.

3 2.4 G indicator

Blinks/Lights up

The 2.4 GHz band (11n/g/b) is

available.

4 WPS indicator

Blinks

The WPS feature is enabled.

5 LAN1 indicator

Lights up

A LAN cable is connected to the

LAN1 terminal.

6 LAN2 indicator

Lights up

A LAN cable is connected to the

LAN2 terminal.

- 7 -



≥ When this unit is not working correctly, disconnect and reconnect the AC

adaptor first.

If the problem persists, press and hold the RESET button for at least 5 seconds

with a paper clip or similar, and then release the button.

Rear

7 DC IN terminal

DC 5 V 1.8 A

8 LAN2 terminal

9 LAN1 terminal

10 RESET button

Resets this unit to the factory

default settings.

Use a paper clip or similar to press

this button when this unit is not

working correctly, for example.

11 WPS button

12 QR code

13 Key

13

12

13

12

- 8 -

Connections

§ Use this connection to:

jconfigure advanced settings for this unit (l 17)

jupdate the firmware of this unit (l 28)



≥ The LAN cable must be connected or disconnected while the AC adaptor is

disconnected.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the

unit.

≥ If the LAN cable is disconnected, the network-related settings (l 17) will be

initialized. In that case, make the settings again.

LAN

A LAN cable (supplied)

Do not use any other LAN cable

except the supplied one.

B Broadband router, etc.

C LAN cable (not supplied)

Use category 5 or above straight

LAN cables (STP) when

connecting to peripheral devices.

D PC









- 9 -

E DC cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug

them straight out. (Otherwise the connectors may bend out of shape, which

may cause malfunction.)

F AC adaptor (supplied)

G To power outlet

The indicators (*) light up in blue after approximately 60 seconds.



≥ For the purpose of power conservation, disconnect the power supply if you will

not be using it for extended period of time. Some settings will be lost after you

disconnect the system. You have to set them again.

DC





*



- 10 -

Network settings

You can stream music from a device on the network by using the

Qualcomm

®

AllPlay

TM

smart media platform or DLNA feature. To use these

features, this unit must join the same network as the device.

Qualcomm

®

AllPlay

TM

smart media platform is a product of Qualcomm Connected

Experiences, Inc.

Choose a network setting method from the following.



≥ The setting will be cancelled after the set time limit. In that case, try the setting

again.

“Using an Internet browser” (l 13)

≥ You can access this unit’s network settings from the Internet

browser on your smartphone or tablet, etc.

“Using WPS (Wi-Fi Protected Setup

TM

)” (l 16)

≥ You can connect to a wireless LAN network by pressing the WPS

button or entering a PIN code.

“Using the app “Panasonic Music Streaming”” (l 11)

≥ You can make the wireless network settings with the app,

“Panasonic Music Streaming” (free of charge).

- 11 -

≥ Do not connect a LAN cable to ALL speaker. Doing so will disable the

Wi-Fi function.

1 Download and start the app “Panasonic Music Streaming” (free

of charge) on your smartphone.

≥ [iOS] : App Store

≥ [Android] : Google Play

TM

2 Open the app and follow the on-screen instructions.

≥ Follow the app’s instructions to connect to your ALL speaker.

The procedure splits into the paths described below along the way.

∫ Path 1: When the SH-WL30 is detected

(a screen similar the one below appears)

1 Select “Add”.

2 Scan the QR code on the bottom side of this unit.

Scan the QR code for either 5 GHz (recommended) or 2.4 GHz, depending on

your environment. (l 27)

Using the app “Panasonic Music Streaming”

- 12 -

∫ Path 2: When the SH-WL30 is not detected automatically

(a screen similar the one below appears)

≥ Depending on the screen size of your smartphone/tablet, you may

need to scroll to the bottom for any remaining steps.

Refer to “Using an Internet browser” (l 13).

Configure the connection of the ALL speaker to be added to the wireless

network.

For details, refer to the Operating Instructions for the ALL speaker.

≥ In case you are not connected automatically,

please re-select your Wi-Fi network from the settings / Wi-Fi settings

menu on your device.

The operations and on-screen display items, etc. of the app “Panasonic Music

Streaming” are subject to change.

For the latest information, visit

http://panasonic.jp/support/global/cs/audio/app/

(This site is in English only.)

- 13 -

≥ The following steps are based on a smartphone.

1 Turn on your ALL speaker.

≥ You may need to configure the ALL speaker manually.

For details, refer to the Operating Instructions for the ALL speaker.

2 Go to Wi-Fi settings on the device.

3 Select “AllPlay _AJ” to connect to this unit.

≥ “” stands for a character that is unique to each set.

≥ This can take up to 1 minute to appear in your Wi-Fi list.

≥ If this operation does not work correctly, please repeat it several times.

≥ Make sure that DHCP is enabled for the network setting on your compatible

device.

[iOS_device]: The settings page will be automatically displayed in the Internet

browser.

[Except_iOS_device]: Open the Internet browser and refresh the page to display

the settings page.

≥ If the settings page is not displayed, input “http://172.19.42.1/” into the URL

address field.

Using an Internet browser

Settings Wi-Fi Settings

Wi-Fi

AllPlay

- 14 -

4 Input a device name and then select “Next”.

≥ The device name will be displayed as this unit’s name on the network.

≥ The guaranteed limit is 32 characters.

≥ The device name is set when “Next” is selected.

≥ You can also change the device name after the network connection is set

up. (l 17)

5 Change the network name (SSID) to “SH-WL30-5G- ”

or “SH-WL30-2G- ”and input the password (Key) for

this unit (refer to the bottom side of the unit).

≥ Check the wireless router for the network name (SSID) and the password.

≥ A list of network names (SSIDs) will be appeared when you select the

“Network Name” field.

≥ To show the characters typed in the “Password” field, select “Show

Password”.

≥ If your network requires specific settings, deselect “DHCP” to disable

DHCP.

– You can use specific IP address, subnet mask, default gateway, primary

DNS, etc.

≥ To update the network name (SSID) list, select “Refresh list”.

- 15 -

6 Select “Connect” to apply the settings.

≥ Refer to the Operating Instructions for your ALL speaker for information on

how it operates when the connection is complete.

≥ Depending on the device, the connection complete screen may not be

displayed.

7 Make sure to connect your compatible device back to your

home wireless network.



≥ Enable Java and cookies in your browser settings.

≥ You can change the user name and password. (l 26, “Password”)

If the network indicator does not light up, check the network name

(SSID) and the password, and then try the setting again.

- 16 -

≥ Do not connect a LAN cable to ALL speaker. Doing so will disable the

Wi-Fi function.

1 Set your ALL speaker to WPS Connection mode.

≥ For details, refer to the Operating Instructions for the ALL speaker.

2 Press and hold the WPS button on this unit for at least 3

seconds.

≥ The WPS indicator blinks. The WPS indicator blinks for about 2 minutes

until the connection is completed.

≥ When the connection is complete, the WPS indicator will light up for about

10 seconds.



≥ The default setting is 5 GHz.

Go to the advanced setup screen to switch to 2.4 GHz. (l 27)

≥ The WPS indicator blinks fast for about 1 minute when a connection attempt

fails.

Using WPS (Wi-Fi Protected Setup

TM

)

- 17 -

To make network-related settings

You can change this unit’s name on the network, and use specific IP address, etc.

Preparation

≥ Change the IP address settings of the device (PC, etc.) to the ones

below.

For details on how to change these settings, refer to the operating instructions

for your device.

IP Address:

“10.10.10.” (“” stands for any number between 1 and 253.)

Subnet mask:

“255.255.255.0”

≥ Connect this unit and the device. (l 8)

1

Start an Internet browser on your device and then input “http://

10.10.10.254/” into the address field to display the settings page.

2 Input user name and password and select “OK”.

≥ When performing this step for the first time, enter “admin” into both the ID

and password fields.

≥ It may take a few minutes until the settings page is displayed depending on

the environment. In that case, reload the browser.

≥ If you enter a wrong ID or password, close the Internet browser first, and

then follow the steps above again.

You can also change the name of this unit by changing a setting in the app

“Panasonic Music Streaming” (version 3.1.0 or later) (l 11).

For details on the app, refer to the site below.

http://panasonic.jp/support/global/cs/audio/app/

(This site is in English only.)

Select English

or French.

- 18 -

Select either “2.4G” or “5G”.

Basic Settings

This page is used to configure the parameters for wireless LAN clients that

may connect to this unit. Here you may change wireless relative settings

as well as wireless network parameters.

When the settings are complete, click “Apply”.

≥ The settings will be applied after you click “Refresh” and wait for a while.

≥ To reconfigure the settings, click “Back”.

Wireless

Item Description

WiFi UP/DOWN

The setting changes each time you click the item.

You can turn on/off the 2.4 GHz or 5 GHz

radio signal setting.

Network Mode

You can select the setting from the pull

down menu.

1st SSID

It is the wireless network name.

The SSID can be 32 bytes long.

Channel Width

You can select the setting from the pull

down menu.

Channel Number

You can select the setting from the pull down menu.

Select the wireless communication channel

from the pull-down menu.

SSID stealth

You can select the setting from the pull

down menu.

- 19 -

Encryption

This page allows you setup the wireless security. Turn on WPA2 by using

encryption keys could prevent any unauthorized access to your wireless

network.

When the settings are complete, click “Apply”.

≥ The settings will be applied after you click “Refresh” and wait for a while.

≥ To reconfigure the settings, click “Back”.

Item Description

Select SSID The SSID of this unit is displayed.

Encryption

Select the encryption supported over

wireless access from the pull down

menu.

Key Format

Select the WEP shared secret key

format from the pull-down menu. The

format can be chose between

Passphrase and hexadecimal (HEX)

code.

Pre-Shared Key

Secret key of WEP security

encryption function.

Show Password

Click checkbox to show/hide

password.

- 20 -

Access Control

If you enable wireless access control, only those clients whose wireless MAC

addresses are in the access control list will be able to connect to this unit.

When this option is enabled, no wireless clients will be able to connect if the list

contains no entries.

When the settings are complete, click “Apply”.

≥ The settings will be applied after you click “Refresh” and wait for a while.

≥ To reconfigure the settings, click “Back”.

Item Description

Wireless Access Control Mode

Select the Wireless Access Control

mode setting from the pull down

menu.

This is a security control function;

only those clients registered in the

access control list can link to this unit.

MAC Address

Input the MAC address of client to

register this unit access capability.

Comment

Input the comment tag for the

registered client.

Current Access Control List

It shows the registered clients that are

allowed to link to this unit.

Del

Click to delete the selected clients

that will be access right removed from

this unit.

Delete All

Click to delete all the registered

clients from the access allowed list.

Page is loading ...

Panasonic SHWL30EC Operating instructions

Panasonic SHWL30EC Operating instructions

Related papers

Other documents