Panasonic KXTCD820E Operating instructions
- Type
- Operating instructions
PQQW14742ZA DC0705DK0
Digital Cordless Answering System
Model No. KX-TCD820E
1 Connections
2 Battery installation
Quick Guide
Hooks
Use only the included AC adaptor and
telephone line cord.
(220–240 V, 50 Hz)
To telephone network
Charge the batteries
for about 7 hours
before initial use.
TCD820E_QG(e).fm Page 1 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI
– 2 –
3 Symbols used in this manual
Setting the date and time
4 Basic operations
Symbol Meaning
" Press " (centre of joystick).
i Proceed to the next operation.
# Press # (centre of joystick).
j Select j (caller list menu icon).
k Select k (SMS settings menu icon).
l Select l (answering system settings menu icon).
m Select m (handset settings menu icon).
n Select n (base unit settings menu icon).
o Select o (infrared menu icon).
“ ” Example: “Time Settings”
Push the joystick up or down to select the words in quotations shown on
the display.
1 " (centre of joystick) i m i #
2 “Time Settings” i #
3 “Set Date & Time” i #
4 Enter the current day, month and year.
5 Enter the current hour and minute.
6 # i {ih}
Feature Operation
Making a call Dial the phone number. i {C}/{s}
Answering a call {C}
Hanging up {ih}
Receiver/speaker volume Push the joystick up or down while on a call.
Last number redial B (right soft key) i {C}
{ih}
"/#
R
TCD820E_QG(e).fm Page 2 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI
– 3 –
Answering system
Making a call with redial list B (right soft key) i Push the joystick up or down
to select the desired number. i {C}
Handset phonebook: storing an
entry (name, phone numbers,
picture)
A (left soft key) i " i “New Entry” i
# i “Name” i # i Enter the party’s name
(16 characters max.). i # i “Phone No. 1”
i # i Enter the party’s phone number (24 digits
max.). i # i “Picture” i # i
“Preset Pictures” or “User Pictures” i #
i Push the joystick up or down to select the desired
picture. i # i “Category 1” i # i
Select the desired category. i # i “<Save>”
i # i {ih}
L You can store up to 3 phone numbers for each entry.
L To enter a name, see the character table in the
operating instructions.
Handset phonebook: making a
call
A (left soft key) i Push the joystick up or down to
display the desired entry. i {C}
L If more than 1 phone number is assigned to the
entry, press {C}/y. i Select the desired
phone number. i {C}
Handset ringer volume " (centre of joystick) i m i # i “Ringer
Setup” i # i “Ringer Volume” i #
i Push the joystick up or down to select the desired
volume. i # i {ih}
Changing ringtone
(outside calls)
" (centre of joystick) i m i # i “Ringer
Setup” i # i “Ext. Ringtone” i #
i “Preset Ringtones” or “User Ringtones”
i # i Select the desired ringtone. i # i
{ih}
Feature Operation
Answering on/off " (centre of joystick) i l i # i a i
{ih}
Listening to messages " (centre of joystick) i l i # i “Play
New Msg.” or “Play All Msg.” i #
Feature Operation
TCD820E_QG(e).fm Page 3 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI
– 4 –
5 Frequently asked questions
Question Cause & solution
What kind of power outlet
should I connect the AC
adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is w flashing? L The handset is too far from the base unit. Move closer.
L The AC adaptor is not connected. Check the
connections.
L The handset is not registered to the base unit. Register it.
" (centre of joystick) i m i # i
“Registration” i # i “Register H.set” i
# i Select a base unit number. i # i Press
and hold {x} on the base unit for about 3 seconds, until the
registration tone sounds. i Wait until “Enter Base
PIN” is displayed. i Enter the base unit PIN (default:
“0000”). i #
Why is the handset display
blank?
The handset is not turned on. To turn the power on, press
{ih} until a short beep sounds.
What should I do when the
handset does not turn on?
L Make sure that the batteries are installed correctly.
L Fully charge the batteries.
L Clean the charge contacts and charge again.
How long should I charge new
batteries?
Charge the batteries for about 7 hours.
How long is the battery
operating time?
When you are using fully-charged Ni-MH batteries;
Talking: 14 hours max.
Standby: 150 hours max.
L Battery operating time may be shortened over time
depending on usage conditions and ambient
temperature.
When should I replace the
batteries?
If the batteries are fully charged until
!
is displayed, but
#
is displayed after a few calls, replace the batteries with new
ones.
What is a PIN? The PIN is a 4-digit number that must be entered in order
to change certain handset and base unit settings. The
default PIN for both the handset and base unit is “0000”.
What do I need to do to
display caller information?
You need to subscribe to Caller ID service. Consult your
service provider for details.
TCD820E_QG(e).fm Page 4 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI
– 5 –
6 To use Caller ID and SMS (optional services)
If you subscribe to Caller ID service, you can:
7 Sales and support information
.
– display caller information
– identify who is calling by using different display colours and ringtones
(handset phonebook category)
– identify who is calling without looking at the display (audible call)
To use SMS, you must subscribe to Caller ID and/or appropriate service.
SMS (Short Message Service)
Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333
Ann
012345
Ann
012345
Ann
Customer Care Centre
L For customers within the UK: 08700 100 076
L For customers within the Republic of Ireland: 01289 8333
L Visit our website for product information: www.panasonic.co.uk
L E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
L Order accessory and consumable items for your product with ease and confidence by
phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am
- 5:30pm (Excluding public holidays).
L
Or go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
L
Most major credit and debit cards accepted.
L
All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
L
It couldn t be simpler!
L
Also available through our Internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
TCD820E_QG(e).fm Page 5 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI
IMPORTANT
If you have problems setting up or
operating this product please call
the Panasonic DECT Helpline
08700 100 076 (UK)
01289 8333 (Repl of Ireland)
TCD820E_QG(e).fm Page 6 Wednesday, July 13, 2005 5:40 PM
Red spot 45.0° 60.0 LPI
-
1
-
2
-
3
-
4
-
5
-
6
Panasonic KXTCD820E Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic KXTCD820FX Operating instructions
-
Panasonic KXTCD290E Operating instructions
-
-
-
-
Panasonic KXTCD240E Operating instructions
-
-
-
-
Panasonic KX-TG1103 Owner's manual