Kingston Technology KHX7200D2/256 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KHX7200D2/256 is a 256MB DDR2-900 CL5 SDRAM memory module designed for use in high-performance computing applications. It features a double-data-rate architecture, which allows for two data transfers per clock cycle. The module also has a bidirectional data strobe (DQS) and differential clock inputs (CK and CK#), which help to ensure data integrity. Additionally, the module has a programmable read latency of 5 clock cycles and a burst length of 4 or 8.

Kingston Technology KHX7200D2/256 is a 256MB DDR2-900 CL5 SDRAM memory module designed for use in high-performance computing applications. It features a double-data-rate architecture, which allows for two data transfers per clock cycle. The module also has a bidirectional data strobe (DQS) and differential clock inputs (CK and CK#), which help to ensure data integrity. Additionally, the module has a programmable read latency of 5 clock cycles and a burst length of 4 or 8.

Memory Module Specification
Document No. 4804268-001.A00
09/02/05
KHX7200D2/256
256MB 32M x 64-Bit PC2-7200
CL5 240-Pin DIMM
KEYED
Page 1
DESCRIPTION:
This document describes Kingston's 32M x 64-bit (256MB) DDR2-900 CL5 SDRAM (Synchronous
DRAM) memory module, based on eight 32M x 8-bit DDR2 FBGA components. This module has
been tested to run at DDR2 900MHz at low latency timing of 5-5-5-15 at 2.00V. The SPD is
programmed to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V. This 240-pin DIMM
uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +2.00V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=5 3ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 54ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 75ns
Row Active Time (tRAS) 39ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.585 W (operating)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 55
o
C
Storage Temperature -55
o
C to +125
o
C
TECHNOLOGY
Kingston Technology
Document No. 4804268-001.A00 Page 2
MODULE DIMENSIONS:
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
For more information, go to www.kingston.com
Units: millimeters
1.270 ± 0.10
2.7
2.50
1.00
0.20
2.50±0.20
5.00
4.00
1.50±0.10
0.80±0.05
4.00
3.80
3.00
4.00
  • Page 1 1
  • Page 2 2

Kingston Technology KHX7200D2/256 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KHX7200D2/256 is a 256MB DDR2-900 CL5 SDRAM memory module designed for use in high-performance computing applications. It features a double-data-rate architecture, which allows for two data transfers per clock cycle. The module also has a bidirectional data strobe (DQS) and differential clock inputs (CK and CK#), which help to ensure data integrity. Additionally, the module has a programmable read latency of 5 clock cycles and a burst length of 4 or 8.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI