Vizio E470-A0 Quick start guide

Category
LED TVs
Type
Quick start guide

This manual is also suitable for

VIZIO
QUICK
START
GUIDE
FULL USER MANUAL AVAILABLE AT VIZIO.COM
MODEL
E470-A0
LED + FULL HD
SLIM FRAME DESIGN
Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or
electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from
damage due to power surges.
Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages,
electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug
the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair your TV yourself.
Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause
fire or electric shock.
Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high
humidity may cause fire or electric shock.
Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.
When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside
the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the
remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids, such as vases, shall be placed on
the apparatus.
The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE
within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
h
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent
your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV.
Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
Unplug the power cord before cleaning your TV.
When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing.
Wait before turning on your TV to avoid causing fire, electric shock, or component damage.
A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven,
amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric
shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV
and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or
cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so
could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.
Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supplied to your home, consult your dealer or local power company.
Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper installations.
The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your
dealer.
When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be installed near your TV and easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
Phone:
Email:
Web:
(877) 878-4946 (TOLL-FREE)
techsupport@VIZIO.com
www.VIZIO.com/support
Hours of operation:
Monday - Friday:
5
am
TO
9
pm
(pST)
Saturday - Sunday:
8
am
TO
4
pm
(pST)
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
New Product Setup
Connecting Your Devices
Technical Problems
And More
We speak English • Se habla Español • Nous parlons Français
HELP VIZIO REDUCE PAPER WASTE.
DOWNLOAD THE FULL USER MANUAL AT
VIZIO.COM/SUPPORT
PACKAGE CONTENTS
This Quick Start Guide
VIZIO
QUICK
START
GUIDE
FULL USER MANUAL AVAILABLE AT VIZIO.COM
MODEL
E470-A0
LED + FULL HD
SLIM FRAME DESIGN
Remote Control
with Batteries
VIZIO LED HDTV
Power Cord
3x M4 16mm
Hex Screws
Hex
Wrench
USING THE REMOTE
INPUT
Change the currently-displayed input.
ARROW
Navigate the on-screen menu.
EXIT
Close the on-screen menu.
CLOSED CAPTIONS
Open the closed caption menu.
A/V CONTROLS
Control USB media player.
WIDE
Change the display mode.
MUTE
Turn the audio off or on.
BACK
Go to the previous on-screen menu.
POWER
Turn TV on or off.
MENU
Display the on-screen menu.
INFO
Display the info window.
DASH
Use with number pad to manually enter
a digital sub-channel.
(For example, 18-4 or 18-5.)
CHANNEL UP/DOWN
Change the channel.
GUIDE
Display the info window.
LAST
Return to the channel last viewed.
NUMBER PAD
Manually enter a channel.
VOLUME UP/DOWN
Increase or decrease loudness of the audio.
OK
Select the highlighted menu option.
V BUTTON
Open the USB media player.
INSTALLING THE BASE
Place the TV on a stable, level surface.
1 2
Place the TV screen-down on a clean, flat surface. To
prevent scratches or damage to the screen, place the TV
on a soft surface, such as carpet, rug, or blanket.
Align the base with the TV and tighten the hex screws into
the base with the included hex wrench.
Available at www.VIZIO.com
This Product Sold Separately
The VIZIO Home Theater Sound Bar with Wireless Subwoofer delivers exceptional audio performance in a new
sleeker, slimmer design - a perfect complement for a 32” HDTV and larger. This powerful sound system is also
remarkably versatile. Its wireless subwoofer fits nearly anywhere in your home theater up to 60 ft. away, and the
sound bar offers either a table-stand or wall-mount option.
UPGRADE TO POWERFUL DIGITAL AUDIO
FIRST-TIME SETUP
Remove the battery cover by pressing gently on the VIZIO
logo and sliding away from the remote.
Insert the included batteries.
Gently slide the battery cover back into place.
USB
1
2
3
OPTICAL
OUT
PC AUDIO
HDMI (BEST)
CABLE
/
ANTENNA
DTV / TV
COMPONENT (BETTER)
Y
V
COMPOSITE (GOOD)
1 2
(ARC)
HDMI (BEST)
SIDE
3
OPTICAL
USB
HDMI
(BEST)
AUDIO
OUT
2
Connect the power cord to the back of the TV.
Plug the power cord into an electrical outlet.
1
USB
1
2
3
OPTICAL
OUT
PC AUDIO
HDMI (BEST)
CABLE
/
ANTENNA
DTV / TV
COMPONENT (BETTER)
Y
V
COMPOSITE (GOOD)
1 2
(ARC)
HDMI (BEST)
SIDE
3
OPTICAL
USB
HDMI
(BEST)
AUDIO
OUT
If you have an external antenna or a cable connection that
extends from a wall outlet, connect it to the TV with an
RF/Coaxial cable.
4
Turn the TV on by pressing the Power button on
the remote.
The Setup App is displayed.
Use the Arrow buttons on the remote to highlight your
preferred language and press OK.
Back of TV
Coaxial
Cable
3
5
Use the Arrow buttons on the remote to highlight Home
Mode and press OK.
6
Use the Arrow buttons on the remote to highlight your
time zone and press OK.
Use the Arrow buttons on the remote to turn daylight
saving time On or Off.
7
Answer the on-screen questions about your TV
connection using the Arrow and OK buttons on
the remote.
8
Highlight Begin the channel scan and press OK.
When you have finished the channel scan, highlight Exit
to Live TV and press OK.
First-time setup is complete.
CONNECTING YOUR DEVICES
USB
1
2
3
OPTICAL
OUT
PC AUDIO
HDMI (BEST)
CABLE
/
ANTENNA
DTV / TV
COMPONENT (BETTER)
Y
V
COMPOSITE (GOOD)
1 2
(ARC)
HDMI (BEST)
SIDE
3
OPTICAL
USB
HDMI
(BEST)
AUDIO
OUT
BACK OF TV
Match
colored connectors
to colored ports.
Choose ONE connection type for each device.
(Cables are not included.)
GOOD
AV CABLE
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
BETTER
COMPONENT CABLE
• ANALOG
• HD VIDEO (1080p)*
• STEREO AUDIO
BEST
HDMI CABLE
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
Game Consoles
Blu-ray
or DVD Players
Cable or Satellite Boxes
Commonly-connected devices:
Match colored connectors
to colored ports.
* Maximum Resolution
LEGAL / COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice
The changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the
FCC Rules could void the user’s authority to operate this equipment.
Caution
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for
each area.
USA: UL
Canada: CSA
Germany: VDE
UK: BASE/BS
Japan: Electric Appliance Control Act
TROUBLESHOOTING
• Be sure the power cord is securely connected to the TV
and to a working electrical outlet.
• Press the Power button on the remote or on the side of
the TV.
There is no power.
There is a picture, but no sound.
• Press the Volume Up button on the remote or on the
side of the TV.
• Press the Mute button on the remote. Be sure mute is OFF.
• Select Menu > Audio. Be sure TV Speakers is set to ON.
There are black bars on the top/bottom/sides of the picture.
• Select MENU > Wide, then select Wide or Zoom.
• Be aware that some TV channels add black bars to the
picture.
The TV displays “No Signal.”
• Ensure your connected devices are turned on.
• Press the INPUT button on the remote and select
the input to which your device is connected
(HDMI, Composite, etc.).
LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials
and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of
commercial use. If a Product covered by this warranty is determined to be defective within the
warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: TechSupport@VIZIO.
com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through
Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com.
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show
that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and
Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and
Products are warranted for the remaining portion of the original warranty or for ninety (90) days
from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not
responsible for transportation costs to the service center, but VIZIO will cover return shipping to the
customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE
CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping
material or packaging that affords an equal degree of protection. VIZIO Technical Support will
provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty
does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper
voltage supply or power surges, signal issues, damages from shipping, acts of God, any type
of customer misuse, modifications or adjustments, as well as installation and set-up issues or
any repairs attempted by anyone other than by a VIZIO authorized service center. Products with
unreadable or removed serial numbers, or requiring routine maintenance are not covered. This
one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a
non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH
ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS
OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other information, ALL CONTENTS AND
INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY
SERVICE. If this occurs, your product will be restored to you configured as originally purchased. You
will be responsible for restoring all applicable data and passwords. Recovery and reinstallation of
user data is not covered under this Limited Warranty. In order to protect your personal information,
VIZIO recommends that you always clear all personal information from the unit before it is serviced,
regardless of the servicer.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY”
on select new product purchases. To determine if this guarantee applies to your product, refer to
the “DETAILS” tab of the model’s product information page (www.VIZIO.com) or look for the “zero
bright pixel” guarantee on the box.
VIZIO
QUICK
START
GUIDE
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
121119CH-NC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Vizio E470-A0 Quick start guide

Category
LED TVs
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI