Ryobi 150r Owner's manual

Brand: Ryobi

Model: 150r

Category: Grass trimmers

Type: Owner's manual

This manual is also suitable for

720r

THANK YOU

Thank you for purchasing this quality product. This modern

outdoor power tool is designed to provide you with many

hours of useful service. You will find it to be a great labor-

saving device.

Thismanualprovidesyouwitheasy-to-understand

operatinginstructions.Readthe entire manualandfollowall

ofthe maintenance andserviceprocedurestokeepyour

newoutdoorpowertoolin topoperatingcondition.

PRODUCT REFERENCES,

ILLUSTRATIONS AND SPECIFICATIONS

All information, illustrations and specifications inthis manual

are based on the latest product information available at the

time of printing, We reserve the rightto make changes at

any time without notice.

THE PURPOSE OF SAFETY SYMBOLS IS TO

ATTRACT YOUR ATTENTION TO POSSIBLE

DANGERS. THE SAFETY SYMBOLS. AND THE

EXPLANATIONS WITH THEM, DESERVE YOUR

CAREFUL ATTENTION AND UNDERSTANDING. THE

SAFETY WARNINGS DO NOT BY THEMSELVES

ELIMINATE ANY DANGER, THE INSTRUCTIONS OR

WARNINGS THEY GIVE ARE NOT SUBSTITUTES FOR

PROPER ACCIDENT PREVENTION MEASURES.

SYMBOL MEANING

WARNING: Failuretoobeya safety

warningcanresultininjury

toyourselfand others.

NOTE:

Advises you of information

or instructions vital to me

operation or maintenance

of the equipment.

SERVICE INFORMATION

Service on this unit both within and after the warranty

period should be performed only by an authorized

and approved service dealer.

Dial 1-800-345-8746 in the United States or

1-800-265-8778 in Canada to obtain the listingof

the authorized service dealer nearest you.

Do not return the unit to the retailer.

WARNING

Always follow the safety precautions to reduce the

risk ot tire_electric shock and personal injury,

Make sure this manual is carefully read and

understood before starting or operating this

equipment.

Also refer to the operator's manual of the power unit for

additional safety warnings.

IMPORTANT SAFETY

INSTRUCTIONS -

SAVE THESE

INSTRUCTIONS!

BEFORE OPERATION:

Carefully read and understand the operator's manual of

the unitthat powers this attachment.

Inspect the area to be edged before starting the unit.

Remove all debris, and hard and sharp objects such as

rocks or glass, which may be thrown by the blade.

WHILE OPERATING:

Always wear safety goggles!glasses at all times when

using the unit. They provide protection against flying

objects and dust.

Wear a dust mask if use will create a dust laden

environment.

Dress properly. Avoid wearing clothing with loose

strings, chains, ties, era.

* Keep blade and guard clear of debris.

Keep clothing and body parts away from the cutting

edger blade.

Do not edge near other people, The edger could propel

small objects at high speed, causing injury.

= Never attempt to clear the blade and guard of debris

with the engine/motor running.

Never operate the edger without the blade cover in

place and properly secured in working order.

Stay clear of the rotating blades.

* Maintain blade condition,

Keep hands and feet away from cutting area.

After striking a foreign object, stop the engine and

inspect the edger for damage and repair before

restarting it.

Use the edger only in a well-ventilated area,

Keep bystanders, especially children, and pets at least

30ft (9.1 m) away.

Look behind and use care when backing up.

Never operate without good visibility or light,

. Exercise caution to avmd slipping or falling,

AFTER OPERATING:

Only qualified personnel should perform any repairs or

maintenance procedures that are not described in this

manual.

SPECIAL SAFETY WARNINGS

FOR ELECTRIC TRIMMERS

AND LAWN EDGERS

:3o not use n rain.

Avoid dangerous environments - never operate edger

n damp or wet conditions.

To reduce the risk of electric shock, do not expose the

unit to ram or operate unit on wet ground.

Always unplug the unit and allow itto cool before

putting it intostorage. Store indoors.

Always unplug the unit when not in use_and before

performing any maintenance or repairs.

SPECIAL SAFETY WARNINGS

FOR GAS TRIMMERS

AND LAWN EDGERS

Avoid spilling the fuel when mixing the oil.

Do not smoke while fueling the power unit.

Fuel the power unit in a well-ventilated area.

Move away from the fueling area when starting the unit.

Do not smoke while operating the unit.

Store n an area free of potential fuel vapor gnitio_

sources such as open fIamas (pilot lights) or electrical

sparking devices (switches, electric motors).

Turn off the engine and let it cool before refueling or

before putting the unit in storage.

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the

operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

SIGNIFICATION

SAFETY ALERT SYMBOL,

Indicates caution, warning, or danger. May be

used in conjunction with other symbols or

pictographs.

READ OPERATOR'S MANUAL,

Failure tofollow operating instructions and safety

precautions in operator's manual can result in

serious injury. Read operator's manual before

starting or operating this unit.

WEAR EYE AND HEARING PROTECTION.

Warning. Thrown objects and loud noise can

cause severe eye injuryand hearing k:_. Wear

ear and eye protection when operating this unit,

= FOR SERVICE INFORMATION, CALL:

USA: 1=800-345-8746

CANADA: 1-800-265-6778

BOOM COUPLrRJl

Your unit may or may not be completely

assembled. If it is not assembled, use

the following instructions,

Loosen the 2 cover wing screws

and swivel cover. Install the

carriage bolt through the housing

and secure the wheel bracket

assembly with the adjustment knob

and flat washer. Make sure the

carriage bolt is properly seated

mrough the housing (Fig. 1).

Fig. 1

2. Pull the flex shaft out of the boom

about 51 "am {2 inL Insert the shaft

into the square hole in the housing

(Fig. 2),

Fig. 2

3. Back out the anti-rotation screw

ana push the boom assembly into

the casting, Rotate until the hole in

the boom is aligned with the hole in

the casting, Install the anti-rotation

screw and tighten the clamp screw

(Fig. 3).

Fig, 3

1. Loosen the wing screws of the

Split Boom ®coupler. This will allow

the lower (attachment} boom to be

inserted into the coupler (Fig. 4).

Fig. 4

Removethe protective coverfrom

the {owerboom and oushitintothe

coupler(Fig5).

Before locking the release button

intothe coupler, rotate the boom 90

oegrees; then rotate the lower

boom back 90 degrees. This will

ensure the drive shafts in both the

upper and lower booms are

engaged,

Coupler

Wing Screw

Fig. 5

Locate and lock the release button

intothe hole in the coupler (Fig. 5).

Check the sight hole to make sure

both ends of the boom are together

(Fig. 6). Tighten me wing screws

before using.

5. To remove the attachment, loosen

the wing screws, push the release

I_uttonand pull the lower boom

straight out of the coupler (Fig, 6),

Wing

Coupler

Fig. 6

The edger is designed to cut deep

edges along paths, driveways,

rockeries etc. It may be necessary

to first dig a smell trench along the

edge so the blade can rotate at

speed. By regularly edging the

path. the trench will be maintained

and the blade will cut effectively.

Do not force the unit into deep

overgrown edges because this

may cause damage to the blade or

drive mechanism.

The illustration below shows the

typical operating position. Edge

along paths, driveways, gardens

(Fig. 7).

Fig. 7

4. To adjust the blade cutting depth.

loosen the adjustment knob above

the wheel. Slide the bracket intothe

desired position and retighten the

knob (Fig. 8).

Fig. 8

5¸

BLADE CLEANING/

REPLACEMENT

WARNING

Always wear gloves while

installing or handling the

blade.

1, To clean or replace the blade, with

engine/motor turned off. loosen the

2 wing screws and the swivel cover

(Fig. 9).

If you do not have a torque wrench,

thread the lock nut onto the brush blade

by hand as tightly as possible (Fig. 12).

Using an open-ended wrench, rotate the

nut 1/4-1/2 of afullturn (Fig, 13). The

torque of the nutshould be within the

required specifications of 225-250 in.lb

(25.3-28.1 N.m).

Fig, 11

Grease

Plug

Fig. 14

! sPEc, ,cA oNsIi

Operating Weight of Attachment:

5.25 Ibs. (2.36 kg)

Fig. 9

qamova the blade by inserting the

locking rod tool intothe blade

driver slot and loosen the lock nul

clockwise with a wrench, Remove

the nut, retainer washer and blade

(Fig. 10).

Fig. 12

Fig. 10

Install the blade, retainer washer

and lock nut. Insert the locking rod

tool into the slot or blade driver.

Proper care should be taken to

ensure that the blade stays in its

_roper position,

If you have a torque wrench.

tighten the lock nut to 225-250 inoib

(25.3-28.1 N.m), while holding

the locking rod in the locking rod

slot (Fig. 11),

Fig. 13

Checkthe gear housing for

lubricant every 50 hours of

operation, Remove the grease fill

plug to check the lubricant level, it

should be up tb the bottom edge of

check hole. If low, bring upto. but

not over, the bottom edge with a

good quality, lithium-based. #2.

multi-purpose grease, Securely

t_ghtenthe fill plug to prevent

leakage (Fig, 14).

PARTS LIST - MODEL LE720r

Serial no. 407061541 and greater.

1 612605

2 180199

3 180198

4 684067

5 613216

6 684068

7 613217

8 684069

9 613218

10 613219

11 684070

12 684071

PARTNAME

Hanger

Drive Shaft Housing Assembly

Drive Shaft Assembly

Gear Box Assembly

(includes items 7, 14 and 15)

Wheel

Wheel Mounting Bolt Assembly

Driver, Blade

Adjustment Knob Assembly

Deflector

Guide Bracket

Mounting Boll AsSembly, Set

Mounting Boll Set, Cover

ITEM

13 180103

14 613221

15 613222

16 180064

17 613224

613226

180014

not shown

Cover

Retaining Nut

Retaining Washer

Blade

Guard

Looking Rod

Blade Retainer Kit (item,s 14 & 15)

Limited Two-Year Warranty

RYOBI AMERICA CORP. w=ffards esch new RYOBI Product for two (2) yeirs

according to thefo,o_ng terms,

TIhls warranty extends to the original retail pL_chas_t on ty and commences on the date

of c_iginelretail I_Chese.

Anypad _ the RYOB Productrnanofanturedct supplied byRYOBIand foundin the

reasoners judgementof RYOBI to he defective In m_edaJor worktl_anshlpw_lDe

ret:_dtedotrel_aCedbyin autpodzed RYOBIservicedealerwithourchirge_r _ _d

labor.

The RYOGI Product liY:lldl_aW dlf6._lve plrl m,ll be r¢umiKI to =n m_r_ori=_

II'.'!_'l_ d_r "oth]n the warr e_y I_i_t, The e_4_,lmx of d_l,'er_g the RY_I product

to the deBler _r w_rsi_ _ and _ _ of r_ucnlng I! I:_k to ihe owner I_er

_r or mpI_m_l "_11he pold f_ bythe ow. RY_Ps r _l_n_Nl_ In m_ to

€_l_ _ _ed to r_hlng U_ _lulrpo ml:_sl_s or _l_lmt,,ts and no claim of b_=i_

of w_'s_ shell be _u_ f_ _UOIon or r_i_o_ of the _ntr_ of sa!e _ _

deale_

This warranty Is Itrded to nl_ety {90) d=ys from fhe d=e ot or;glnil rntlnt p_se fo{

iny RYOBI Produnt thai _ used foerettt_l or corra'r_tc{al pu_poses.o¢ any omer income*

producing purpose.

This wtirranty does no_ oover =ny RYOEI Pmdu= thld has been SUb_ to nl_Me,

negle_, tlegllgeflce, or ilcc_, or thid has been opet nted In in)* way contr=Pj to the

opetaung InStruction= as _ified _'1the RYOEI Opor_dofs Man_aL This weffmnly _oes

notepplytoanyo_m_ge tothe RYOBI Produ_ that Isthe ruult of ImProper rnsmten_nce

or 1oiny RYOBI Product that has blen altered or modified 1o as to _'ve_d:_ reflect the

WOOU_ operattom, mertormmP_ ordgr=bil_y or thmt he= been miteredo¢ mod_ _ _

to chatv3e it.sIntended use. Th= waa'm r_ does not exter_ to _POk$ made neoe_P/

by nmmmlWear or by the uw of _ or _ _leh sm e_her I_ll_e with

the RYOBI Ploduct o_ adversely affect P_ operstb_t. _ertorrt_tt_ or durabl_y.

ALL IMPLIEDWARRANTIESARE LIMITED IN DURATION TO THE TWO (2) YEAR

WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY

COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES

INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULARPURPOSE, OR

OTHERWISE,ARE DISCLAIMEOINTHEIRENTIRETYAFTER THE EXPIRATIONOF

THEAPPROPRIATE TWO-YEAR ORNINETY DAY WARRANTYPERIOD.RYOB_'S

OBLIGATIONUNDER THISWARRANTY,I_STRICTLYAND EXCLUSWELYLIMITED

TOTHEREPAIRORREPLACEMENTCF DEFECTIVEPARTE.AND ROPDOESNOT

ASSUME OR AUTRORIZE ANYONE TO ASSUME FOR THEM ANY OTHER

OBLIGATION.SOME STATES DONOTALLOW LIMITA_ONS ON HOW LONGAN

IMPUED WARRANTYLASTS. SO THE ABOVE UMITATION MAY NOT APPLY TO

YOU.

RYOEI ASEUME_ NO RESPONEII_UTY FOR INCIDENTAL. CONSEQUENTIAL OR

OTHER 3AMAGE_ INCLUDING. EUT NOT LIMITED TO EXPENSE OF RETURNING

THE RYOBI PRODUCT TOAN AUTHORIZED SERVICE DEALERAND EXPENEEOF

OEUVERING IT BACK TO THE OWN ER. MECHANIC'S TRAVEL TIME. TELE pHONIE

OR TELEGRAM CHARGEE. RENTAL OF A LiKE PRODUCT DURING THE TIME

WARRANTY _ERVICE IE BEING PERFORMED. TRAVEL¸ LOSS OR DAMAGE TO

PERSONAL PROPERTY. LOSS OF REVENUE. LOSE CF USE OP THE PRODUCT.

LOSS OF TIME. OR INCONVENIENCE. SOME STATE_ DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CON_EOUENTIAL OAMAGE$.

SC THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal ttghts, and you may also have other rights which

vi_*_yfrom st_det_ slate,

This warranty apples to _IIIRYOEI Prc_unts ma_ufec_ured by RYO8I and sold In the

Un_ed States sod Cana_.

To locate your _mst selvlee dealer dl=d1-800-345 8746 inthe Utlitod Stat_s or

1.800-265-677E in Canod=.

In iddiEo_, this war,Tartly does not cover:

A. Tune-ups - Spark Plug_ Ce_u_or A_llU_mems, =l#em

B, We_r _er_ - Bumt_ Knobs, Outer Spools, Cutting Line, Inne_ Reels, 5tarter PuI_y,

_arter Rope_

RYO_I tesetw*s me ngrdto Change or Improve thedesign of any RYOEI Piod_ct wit hOUl

a_umtng any obl_llon to modi_ eny product ptevk_sly rr_ttur_u_eo

RYOBI AMERICA CORP.

5201 Psarman Dairy Rd

Anderson. SC 29622-1207 U,S.A.

RYOBI CANADA iNC.

275 industrial Rd

Cambridge, Ontano NIR 6K2 CANADA

OPERATOR'S MANUAL PART NO. 180936 REV. A

PRINTED IN U.S,A, 9/94

ENGINE PARTS - MODEL 720r

llll, i i

t_m P_

1 180349 Carbureter/Air Cleaner Cover Assembly

(includes item 2)

2 180350 Air Cleaner Filter

3 180351 Carburetor MountingScrew Assembly

4 180352 Wavey Washer

5 180353 Choke Lever and Plate

6 180984 Carburetor Assembly WiLimiter Caps

7 682048 Throttle Adjustment Assembly (Walbro)

7 180092 Throttle Adjustment Assembly (Zama)

8 610675 Carburetor Gasket (10 peck)

9 883974 Primer and Hose Assembly

10 180354 Carburetor Mount Assembly

(includes items 11 and 13)

11 147573 Reed Assembly

12 180022 Power Shaft Assembly

13 612115 Carburetor Mount Gasket (10 pask)

!4 180026 Crankcase Service Assembly (items 12, 14-17)

15 682041 Inner Bearing Assembly

16 610309 Seal

17 610308 Outer Bearing Assembly

18 812134 Rear MounlJng Pad

19 147580 Fuel Tank Assembly (includes items 20-22)

20 180000 Fuel Cap Assembly

21 147290 Return Line Assembly

22 682039 Fuel LineAssembly

23 145308 Front Mounting Pad

24 153520 Shroud Assembly

25 683078 Shroud Extension and Stand

26 180929 Flywheel Assembly

27 145918 Spacer

28 180535 Recoil Pulley Assembly

29 613102 RecoilSpring

30 180930 Pulley Retainer Assembly

31 61t061 Rope Guide

32 180035 Switch Assembly

33 610300 Pull Handle

tt_m

613103

180101

153591

153592

612468

683601

145888

183597

180036

683390

610311

180980

180119

147575

180063

147012

610674

180034

180011

153308

180090

153309

180091

180530

18OO27

610678

147544

180986

Rope

Starter Housing Assembly

Clutch Rotor Assembly

Clutch Drum Assembly

Spring

Clutch Cover Assembly

Clutch Cover Screw Assembly

Upper Clamp Assembly

Wire Lead

Module Assembly

Spark Plug

Exhaust Gasket

Muffler Assembly

Muffler Mounting Boll Assembly

Cylinder Assembly

Piston and Rod Assembly

Cylinder Gasket (10 pack)

Engine Hardware Kit

Engine Gasket Kit

O,E.M Carburetor Repair Kit 0NaJbre)

O.E.M Carburetor Repair Kit (Zama)

Gasket-Diaphragm Repair Kit (WaJbro)

Gasket-Diaphragm Repair Kit (Zama)

Piston Ring

Short BlockAssembly (items 12, 14-17, 48-50)

Flywheel Key (10 pack)

Starter Housing Screw Set

Carburetor Limiter Cap Set

not shown

The above part numbers are for senal numbers 503136551 and

greater.

BOOM & TRIMMER PARTS - MODEL 720r ..........

1 180981

2 61O314

3 180975

4 180021

5 180127

6 180339

7 683295

8 612021

9 612381

10 180687

11 683605

12 683606

13 683607

14 180340

15 153597

16 683608

17 145570

18 145567

19 153312

20 180531

21 683274

22 145569

23 682061

24 153313

25 153619

26 145566

27 610660

26 610317

29 153600

30 153066

Thmttie Housing and Trigger Assembly

Throttle Trigger Spring

Throttle Trigger

Throttle Cable Housing Assembly

Throttle Cable

Upper Drive Shaft Housing Assembly

Handle Bracket Assembly

Tube Closure

Grip

J-Handle Assembly (includes items 8 & 9)

Split Boom Coupler

Coupling Bolt Assembly

Adjustment Knob Set

Lower Drive Shaft Housing Assembly

Lower C_amp Assembly

Lower Flexible Drive Shaft

Retaining Ring

Washer

Bushing Housing Assembly

Guard Mounting Screw Assembly

Guard and Blade Assembly

(includes item 23)

Anti-Rotation Screw

Blade Assembly

Spool Shaft

Outer Spool and Eyelet Assembly

Eyelet

Retainer (10 pack)

Spring

Inner Reel

Bump Head Knob Assembly

OPtional Accessories

610375 Monoflait Cutting Line, 50 ft.

153577 Spool and Line Assembly

147823 Complete Cutting Head Assembly

(includes items 15, 17-30)

682075 Shoulder Strap Assembly

147541R Ryobi 2-Cycle Oil (48 4-oz bottles)

not shown

Replacement

Brushcatter B_ade

Fits 284,740r, 750r, 780r,

780re, 780rb, 790r, 865r,

885r, 990r

P/N 145873r

Shoulder Strap Assembly

Fits al! gas and electric models

PIN 682075r

Brusheutter Kit

includes J-Handle, Blade and

Hardware

For model 865r only

PIN 500795

8made Retaining Kit

Fits LE720, 780r,

780re 780rb, 790r,

885r, 885r and 990r

PtN 180014r

81ade Retaining Kit

Fits 284, 740r, 750r

P/N 180015r

2oCycMeEngine Oi!

All 2-cycle models

PIN147543r

Faam Filter

All gas models except

865r and 885r

P/N180350r

Edger Blade

For LE72Or, 720Er

and 780re

P/N 813223r

Fits alt 2=cycle models except 780r, 780rb, 780re, 790r, 865r

and 885r

Head Assembly

for 740r and 750r

Head Assembly

Fits 130r, !35r, 700r, 71Or,

720r, 760r, 765r, 770r,

920r, 960r, 970r, CS720r,

PIN i53780r P/N 188897r

RYOBI AMERICA CORP,

520i PearmanDairy Road, Suite 1,Anderson, SO 29625°8950

Form No. 6316 rev. A

Ii ii

.665 Single Line

Cartridge

Fits baitary tdmmars

140r, 150r.

PIN 180292r

.065 Due{Line ,080 DUal Line .080 Trimmer Line .995 DUel Line

Cartridge Cartridge Loop wEth59 feet, Cartridge

Fits electric trimmers Fits 130r, 135r,790r, Fits 130r, 135r, 790r, Fits 789r, 789rb, 789re

109r and 125r, 710r, 720r, 740r, 750r, 7t0r, 729r, 740r, 750r, 790r, 865r, 885r and

760r, 765r, 770r, 920r, 760r, 765r, 779r, 920r, 990r

960r, 970r, CS720r end 960r, 970r, CS720r and

SS720r SS720r

PIN i80522r PIN 153577r PiN 619375r PIN 1473&St

Loop with 50 ft.

Fits780r, 780rb, 789re,

790r, 865r, 885r Sod

PiN189129r

Bump Head Knob

Assembly

Fits "190_125r, 130r,

135r, 7_r, 710r, 729r,

749r, 750r, 760r, 765r,

770r, 920r, 960r and

970r

PiN 153066r

Spark Plug

Fits all 2-cycle gas

models except 865r end

885r

PIN 610311r

Bump Head Knob inner Reel Spring

Assembiy (Large) Fits 100r, 125r, 139r,

Fits 780r, 799r, 865r, 135r,799r, 719r, 729r,

985r and 990r 740r, 759r,760r, 765r,

770r, 920r, 990r and

970r

P/N 180814r PIN 619317r

Inner Reel Spring BInde Retaining Nut

Fits 780r, 780rb, 780re, Fits LE720r, 780r,

790r, 865r, 885r, 990r 780rb, 780re, 790r,

865r, 885r and 990r

P/N 0106,36r PiN347491r

Blade Retaining NUt

Fits 2_, 740r and 759r

PiN 145895r

FeelCspAeserably

Fitsallgasmodels,

PIN t8O0OOr

Spark Plug

Fits all 4-cycle gas

models.

PIN 189852r

OH Plug

Fits all 4-cycle gas

models

PIN I81822r

Wing Screws

Fit e,_iTitmmerPlas

models.

PIN 683607r

CALIFORNIA:

FLORIDA:

GEORGIA:

!-800-597-9624

1-800-345-4889

1-800-447-2192

ILLiNOiS:

MASS.:

MINNESOTA:

ol-800-310-2581

1-800-717-3657

1-800-276-0801

NEW JERSEY:

TEXAS:

WASHINGTON:

1-80o.847.s993

1-80b-345-7880

1-890-807-8898

National Parts Distributor Network

Rdseau Des Distributeurs Nationaux De Pibces

Red Nacional De Distribuidores De Repuestos

1. SPENCERofJACKSONVILLE

Jacksonville,FL

(600)33C-277S(N)

(904)262-5667

2; AUTOELECTRICCO.ofALINC.

Dothan,AL

(800)476-4143(N)

(205)792-4144/7924143

3; AUTOELECTRIC,INC.

Clearwater,FL

(800)282-3479(N)

(813)448-3061

4, BEBCO

Birmingham,AL

(BOO)239-5190(N)

(2O5)2556160

_. BILUOU'S

Porlerville,CA

(BOO)245-5466(N)

(209)784-41O2

6, CENTRALFLORIDAENG.

Odando,FL

(4O7)841-430!

7. DIXIESALESCOI_PANY

Greensboro,NC

(800)753-4943(N)

(919)375-7500

8. GARDNERENGINES

Columbus,OH

(800)848-8.946(N)

(614),_B-7_I

9, GARDNEREAST

S.Brunswick,NJ

(BOO)_-6290 (N)

(609)86c_BoBo

10.GUNTHER'SSERM.& SUPPLY

KansasCity, MO

(800) 397-1952 (N)

(816) 523-1952

11.HANCEDISTRIBUTING

Plymouth,MN

(800)535-1184(N)

(812)5852299

1ZHENRYW.O_EILL&ASSOC.

_c_5 NY

_00)724-3145(N)

_16)92_7900

!3. MARRBROTHERS,INC.

Dallas,TX

(800)627-7276(N)

(214)948-7387

14.MEDARTFEN[ON

Fenton,MO

(BOO)SBS-7181(N)

(314)343-051S

15.MEDARTMEMPHIS,INC.

Memphis,TN

(800)765-4365(N)

(901)795-4385

16,MEDARTTULSA

Tulsa,OK

(800)999-6426(N)

(918)627-1448

17,OESTEDISTRIBUTINGINC.

Phoenix,AZ

(800)467-8113(N)

(602)272-1129

18.OSCARWILSONENG.&PARTS

O'Fatlon,MO

(BOO)873-6722(N)

(314)978-1313

19.ROMARAGENCIES

RioPlod{as,PR

(8O9)720-5959

20. RYOBICANADAINC.

Cambridge,Ontedo,Canada

(BOO)265-6778 (N)

(519) 850-3022

21.RYOBIFACTORYSVCCTR#527

Seattle,WA

(BOO)BOT-B698(N)

(206)368-7050

22.RYOBIFACTORYSVCCTR

Newton,MA

(800)717-3657(N)

(617)630-2703

23.SMALLENGINEDIST.,tNC,

Hi_eeh,FL

(80O)433-2Ot4(N)

(306)558-57t6

24.SOUTHWESTPOWER

SUPPLY,INC.

Ft,Myers,FL

(8!3)936-6272

25.SPENCERENGINES

Tampe,FL

(80O)_5-4_1(N)

(613)25I_869

26.SPiTZERIND.PRODUC'IS

Thomtor_CO

(BOO)348-0O27(N)

(303)287-3612

27,TRI-STATEAIRCOOLEDENG.

JohnsonCity,TN

(600}33,_65(N)

(815)928-/107

Factory Service Centers

Centres de Service Apr_s-vente de L'usine

Centros de Servicio de la Fdbrica

GEORGIA

1964 N+Alma School Rd. #10

Chandler, AZ 85224

(800) 66O-7776

(602) 899-5807

CALIFORNIA

9699 Chapman Ave.

Garden Grove. CA 92641

(800) 597-9624

(714) 539-3170

FLORIDA

Akers Mill Square

2969 J Cobb Pkwy.

Atlanta, GA 30339-5909

(800) 447-2192

(404) 953-6979

ILUNOIS

4334 Fox Valley Center Dr.

Aurora, IL 60504

(800) 310-2561

(708) 820-0776

Colonial Square Mall

299 Route 22 E.

Green Brook, NJ 08812

(800) 847-5993

(908) 752-9052

TEXAS

2403-W. Airport Hwy+

Irving, TX 75062

(800) 345-7880

(214) 594-6682

965-967 Semoran Blvd.

Casselberry, FL 32707

(800) 345-4889

(407) 260+2009

188 Needham St.

Newton, MA 02164

(800) 717-3657

(617) 630-2703

MINNESOTA

WASHINGTON

14725 Aurora Ave, North

Suite A9 (rear of bldg)

Seattle, WA '96133

(800) 807-8898

(206) 368-7050

2519 W. 79th St.

Bloomington, MN 55431

(800) 276-0801

(612) 888-5591

Form No. 6331 Rev. B

Printed in U.S.A. 5/95

i:i_ii_i__i I_IY_!ii_i_i__iii_'_i_!_III

Ryobi 150r Owner's manual

Brand: Ryobi

Model: 150r

Category: Grass trimmers

Type: Owner's manual

This manual is also suitable for

720r

Download PDF

report

Ryobi 150r Owner's manual

This manual is also suitable for

Ryobi 150r Owner's manual

Related papers

Other documents