2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Craftsman
  6. 42" High Speed Sweeper

Craftsman 42" High Speed Sweeper, undefined Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Craftsman 42" High Speed Sweeper Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
42" HIGH SPEED
LAWNSWEEPER
Model No's. 486.24266
Owner's Manual
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
PRINTEDINU.S.A.
FORMNO.41750(10/02/14)
SearsBrandManagementCorporation,HoffmanEstates,IL60179U.S.A.
www.craftsman.com
®
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
Want more information
or assembly tips?
Scan for Video
Instruction Guide.
2
Anypowerequipmentcancauseinjuryifoperatedimproperlyoriftheuserdoesnotunderstandhowtooperatetheequipment.
Exercisecautionatalltimes,whenusingpowerequipment.
1. Read the vehicle and sweeper owners manuals and
knowhowtooperateyourvehicleandsweeperbefore
usingthissweeperattachment.Alwaysinstructother
usersbeforetheyoperatethesweeper.
2. Donotpermitchildrentooperatesweeper.
3. Donotpermitanyonetorideonsweeper.
4. Neverattachthehopperropetoanypartofyourbody
orclothing!Neverholdontotheropewhiletowingthe
sweeper!Attachtheropetothetowingvehicletokeep
it away from wheels and rotating parts.
5. Operate the sweeper at reduced speed on rough
terrain, near ditches and on hillsides to prevent loss
of control.
6. Vehiclebrakingandstabilitymaybeaffectedwith
theattachmentofthissweeper.Donotllsweeper
tomaximumcapacitywithoutcheckingthecapability
of the towing vehicle to safely pull and stop with the
sweeper attached. Stay off of steep slopes.
7. Stop and inspect vehicle and sweeper for damage
afterstrikinganobject.Repairanydamagebefore
continuing operation.
8. Keepsweeperawayfromre.Excessiveheatcan
damagethebrushesandhopperbagandcould
causethebaganditscontentstoburn.
9. Before storing the sweeper, always empty the hopper
bagtoavoidspontaneouscombustion.
10. Followmaintenanceandlubricationinstructionsas
outlined in the maintenance section of this manual.
Lookforthissymboltopointoutimportantsafetyprecautions.Itmeans—Attention!!
Become alert!! Your safety is involved.
MaintenanceSchedule .................................................. 13
Storage .......................................................................... 13
ServiceandAdjustments ............................................... 14
Troubleshooting ............................................................. 14
RepairPartsIllustration ................................................. 15
RepairPartsList ............................................................ 16
PartsOrdering ...............................................BACKPAGE
Safety Rules ....................................................................1
Warranty ..........................................................................2
AccessoriesandAttachments..........................................3
CartonContents ..............................................................3
FullSizeHardwareChart .................................................4
SweeperAssemblyInstructions ....................................... 5
HopperAssemblyInstructions .........................................7
Operation ....................................................................... 12
MODELNUMBER: 486.24266
SERIALNUMBER: ____________________
DATEOFPURCHASE: ____________________
WARRANTY
TABLE OF CONTENTS
Themodelandserialnumberswillbefoundonadecal
attached to the lawnsweeper.
Youshouldrecordboththeserialnumberandthedateof
purchase and keep in a safe place for future reference.
SAFETY
CRAFTSMAN LIMITED WARRANTY
FORONEYEARfromthedateofsalethisproductiswarrantedagainstdefectsinmaterialorworkmanship.
WITHPROOFOFSALEadefectiveproductwillbereplacedfreeofcharge.
Forwarrantycoveragedetailstoobtainfreereplacement,visitthewebpage:www.craftsman.com/warranty
Toobtainwarrantycoverage,returnadefectiveproductwithproofofsaletotheretailerfromwhichitwaspurchasedforfree
replacement.
Thiswarrantyisvoidifthisproductiseverusedwhileprovidingcommercialservicesorifrentedtoanotherperson.
Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
DONOTRETURNTOSTOREforMissingPartsorAssemblyQuestions
Call1-866-576-8388AttachmentHotline
3
ACCESSORIES AND ATTACHMENTS
TheFrontMountDethatcher,Model486.24219attaches
to the lawn sweeper to help loosen and remove dead
grass and thatch from the lawn while sweeping.
These accessories were available when the unit was purchased. They are also available at most Sears retail
outlets and service centers. Most Sears stores can order repair parts for you when you provide the model
numbers of your tractor and sweeper
1
2
3
5
6
7
2
16
9
4
10
11
13
14
10
12
11
12
15
8
REF PART NO. QTY DESCRIPTION
1 – – – 1 SweeperHousingAssembly
2 49766 2 BagArmTube
3 46777 HitchTube,L.H.(LeftHand)
4 24192 1 HitchBracket
5 23687 1 HitchBracket,Bent
6 46776 1 HitchTube,R.H.(RightHand)
7 – – – 1 BrushAssembly(RightHand)
8 – – – 1 BrushAssembly(LeftHand)
REF PART NO. QTY DESCRIPTION
9 49768 1 HopperBag
10 47477 2 RearHopperTube
11 49765 2 UpperHopperTube
12 48726 2 LowerHopperTube
13 46823 1 PivotRod
14 43938 2 HopperSupportRod
15 24189 1 Bag Frame Strap
16 43737 1 Rope
CARTON CONTENTS
4
REF PART NO. QTY DESCRIPTION
A 46782 2 HexBolt,5/16-18x3"Lg.
B 43224 2 HexBolt,5/16-18x2-1/4"Lg.
C 43084 4 HexBolt,5/16-18x1-3/4"Lg.
D 43661 4 HexBolt,1/4-20x1"
E 43978 4 CurvedHeadBolt,1/4-20x1"
F 47189 8 NylockNut,1/4"
G 47810 8 NylockNut,5/16"
H 44917 2 Palnut,3/8"
HARDWARE PACKAGE CONTENTS
REF PART NO. QTY DESCRIPTION
I 23368 2 HitchSpacer,3/4"
J 46867 2 ClevisPin,1/4"x1-3/4"
K 48365 2 ClevisPin,1/4"x1-1/8"
L 48366 2 ClevisPin,3/8"x1/2"
M 43055 7 HairpinCotter,3/32"
N 23353 1 HitchPin
O 44481 2 VinylCap
A B C ED
M
N
O
J
I
SHOWN FULL SIZE
NOT SHOWN FULL SIZE
K
L
G
F
H
5
TOOLS REQUIRED FOR ASSEMBLY
(1) Hammer
(2) 7/16"Wrenches
(2) 1/2"Wrenches
ASSEMBLY
STEP 2: (SEE FIGURE 1)
• Eachbrushassemblyhasonebrushretainer
markedwitheitherredorblackink.Layoutthebrush
assembliesasshownsothatthebrushretainers
markedwithinkareinthemiddlewiththeblackone
on your right and the red one on your left.
OVERLAP BRISTLES
BRUSH RETAINER
MARKED RED
BRUSH RETAINER
MARKED BLACK
• Attachthebrushassemblywiththeblackbrush
retainertotherightendofthebrushshaftusingtwo
hexbolts(D)andnylocknuts(F).Thebrushretainer
markedwithblackinkmustbeplacedtothemiddle
of the sweeper.
STEP 1 - REMOVE PARTS FROM CARTON
• Toprotectpaintedparts,laythemoncardboardora
mat.
• Remove the sweeper housing, the loose parts and
thehardwarepackagefromthecarton.Layoutthe
partsandhardwareasshownonpages3and4.
• Placethesheetofcardboardfrominsidethecarton
onto your work surface to prevent scratching the
sweeper.
FIGURE 1
FIGURE 3
NYLOCK NUT (F)
BRUSH
RETAINER
MARKED
BLACK
OVERLAP
BRISTLES
HEX BOLT (D)
WELDED BRACE
STEP 3: (SEE FIGURE 2)
• Tipthesweeperforwardtoaccessthebrushshaft.
FIGURE 2
STEP 4: (SEE FIGURE 3)
IMPORTANT:Besuretheoverlapbristlesfaceoutwhen
abrushisrotatedtothebottomposition.
6
STEP 5: (SEE FIGURE 4)
• Attachthebrushassemblywiththeredbrushretainer
totheleftendofthebrushshaftusingtwohexbolts
(D)andnylocknuts(F).Thebrushretainermarked
withredinkmustbeplacedtothemiddle of the
sweeper.
• Turnawheeltorotatethebrushes.(Thewheels
drivethebrushesinonedirectiononly.)Theoverlap
bristlesshouldbeonthebacksideofthebrushasit
rotates.
FIGURE 4
STEP 6: (SEE FIGURES 5 AND 6)
• Thehitchtubesarestampedwitha"77L"forthe
lefttubeanda"76R"fortherighttube.Thesweeper
housingismarkedwithan"L"ontheleftwithside
andan"R"ontherightside.
• Holdthelefthitchtubeagainsttheleftsideofthe
sweepersothatthe"77L"onthetubefacesaway
fromthesweeper.Attachthehitchtubeusingtwohex
bolts(C)andnylocknuts(G).Do not tighten yet.
HEX BOLT (C)
HITCH TUBE (L.H.)
NYLOCK NUT (G)
TUBE
MARKED
“77L”
HOUSING
MARKED “L”
FIGURE 5
FIGURE 6
HEX BOLT (C)
HITCH TUBE (R.H.)
NYLOCK NUT (G)
TUBE
MARKED
“76R”
HOUSING
MARKED “R”
STEP 7: (SEE FIGURE 6)
• Holdtherighthitchtubeagainsttherightsideofthe
sweepersothatthe"76R"onthetubefacestoward
thesweeper.Attachthehitchtubeusingtwohexbolts
(C)andnylocknuts(G).Do not tighten yet.
HEX BOLT (D)
NYLOCK NUT (F)
BRUSH RETAINER
MARKED RED
STEP 8: (SEE FIGURE 7)
• Fastenthehitchtubestogetherusingtwohexbolts
(A)andnylocknuts(G).Do not tighten yet.
HEX BOLT (A)
NYLOCK NUT (G)
FIGURE 7
7
FIGURE 9
STEP 10b: (SEE FIGURE 9)
• Ifthetractorhitchis10"ormoreabovetheground,
assemblethehitchbracketsasshowningure10.
Inserttwohexbolts(B)throughthebrackets,with
therearhexboltbetweenthecrossboltsinthehitch
tubes.Securethehexbolts(B)withtwonylocknuts
(G).Do not tighten yet.
• Assemblethetwospacers(I)ontothehitchpin(N)
andsecurethepinwiththehairpincotter(M).
FIGURE 8
STEP 10a: (SEE FIGURE 8)
• Ifthetractorhitchislessthan10"abovetheground,
assemblethehitchbracketsasshowningure9.
Inserttwohexbolts(B)throughthebrackets,with
therearhexboltbetweenthecrossboltsinthehitch
tubes.Securethehexbolts(B)withtwonylocknuts
(G).Do not tighten yet.
• Assemblethetwospacers(I)ontothehitchpin(N)
andsecurethepinwiththehairpincotter(M).
STEP 9
• Usethemarkalongthesideofthispagetomeasure
theheightofthetractorhitch.Themarkis10"from
thebottomofthepage.Ifthetractorhitchislessthan
10"abovetheground,gotoSTEP 10a. If the tractor
hitchis10"ormoreabovetheground,gotoSTEP 10b.
STEP 11
• Tightenthefourboltsassembledinsteps6and7.
• Tightenthetwoboltsassembledinstep9.
• Tightenthetwoboltsassembledinstep10aor10b.
10"
NYLOCK NUTS (G)
HITCH BRACKET
ASSEMBLY
BENT HITCH
BRACKET
HEX BOLTS (B)
HITCH PIN (N)
HAIRPIN COTTER (M)
SPACERS (I)
NYLOCK NUTS (G)
BENT HITCH
BRACKET
HITCH
BRACKET
ASSEMBLY
HEX BOLTS (B)
SPACERS (I)
HAIRPIN
COTTER (M)
HITCH PIN (N)
8
ASSEMBLY OF HOPPER BAG
STEP 12: (SEE FIGURE 10)
• Fittheendsofthetwoupperhoppertubesintothe
endsofarearhoppertube.Aligntheholesinthe
endsofthetubesandsecuretheminplaceusingtwo
curvedheadbolts(E)andnylocknuts(F).
• Fittheendsofthetwolowerhoppertubesintothe
endsofarearhoppertube.Aligntheholesinthe
endsofthetubesandsecuretheminplaceusingtwo
curvedheadbolts(E)andnylocknuts(F).
NOTE:Eithersideoftherearhoppertubecanfaceup.
FIGURE 10
FIGURE 11
UPPER
HOPPER
TUBE
HOPPER
BAG
BOTTOM
STITCHED SLEEVE
FIGURE 12
LOWER HOPPER TUBE
HOPPER BAG
BOTTOM
UPPER HOPPER
TUBE
CLEVIS PIN (L)
HAIR COTTER
PIN (M)
UPPER
HOPPER
TUBE
NYLOCK
NUT (F)
CURVED HEAD
BOLT (E)
REAR
HOPPER
TUBE
LOWER
HOPPER TUBE
REAR
HOPPER
TUBE
NYLOCK
NUT (F)
CURVED HEAD
BOLT (E)
STEP 13: (SEE FIGURE 11)
• Unfoldthehopperbag,reversethefoldofthemesh
windscreenandthenlaythebagoutatwiththe
wind screen on top.
• Inserttheendsoftheassembledupperhoppertubes
down through the stitched sleeves in the sides of the
hopperbagandthenslidethetubesbackunderneath
the wind screen.
STEP 14: (SEE FIGURE 12)
• Placetheassembledlowerhoppertubesintothe
bottomofthehopperbagandthenslidethetubesto
thebackofthebag.
• Attachtheendsofthelowerhoppertubestothe
insideoftheupperhoppertubesusingtwoclevis
pins(L)insertedfromtheinside,andtwohaircotter
pins(M).
9
STEP 17: (SEE FIGURE 15)
• Foldthebagapsaroundthelowerhoppertubesand
attachtothebagbottomusingthesnaps.
FIGURE 15
STEP 15: (SEE FIGURE 13)
• Insertthebagframestrapintothestitchedsleeveat
thefrontedgeofthebagbottom.
FIGURE 14
SNAP
FLAP
BAG FRAME STRAP
STITCHED
SLEEVE
STEP 16: (SEE FIGURE 14)
• Assemblethebagframestraptotheholesinthe
lowerhoppertubesusingtwoclevispins(K)andhair
cotterpins(M).
FIGURE 13
STEP 18: (FIGURE 16)
IMPORTANT: Do notoverbendthesupportrods
duringthefollowingstep.Overbendingwillcausethe
steel rods to loose supporting tension.
• Tipthehopperontoit'sbacktoassemblethetwo
hoppersupportrods.Placetheendsofeachrodinto
theupperandlowerrearhoppertubes,bendingthe
rodjustenoughtotintotheholesinthetubes.
SUPPORT
RODS
FIGURE 16
CLEVIS PIN (K)
HAIR COTTER
PIN (M)
BAG FRAME STRAP
10
FIGURE 18
STEP 19: (SEE FIGURE 17)
• Slide the end of the pivot rod through the upper
hoppertube.Placeabagarmtubeontotherod.Slide
the rod through the stitched sleeve at the front edge
ofthewindscreen,andthenplaceanotherbagarm
tubeontotherod.Slidetherodthroughtheother
upperhoppertube.
STEP 22: (SEE FIGURE 20)
• Toattachthehopperbagtothesweeper,slidethe
endsofthebagarmtubesintotheendsofthehitch
tubesandsecurewithtwoclevispins(J)andhairpin
cotters(M).
STEP 21: (SEE FIGURE 19)
• Secure the rope to the center of the upper rear
hoppertube.
FIGURE 20
STEP 20: (SEE FIGURE 18)
• Assembleavinylcap(O)ontoeachbagarmtube.
• Assembletwopalnuts(H)ontotheendsofthepivot
rod using a hammer.
HINT: Toeaseassemblyofthepalnuts,placethebag
onitssideonasolidsurface.Withthebottomendofthe
pivot rod against the surface, tap a palnut onto the top
end of the rod. Repeat for other end of rod.
FIGURE 17
FIGURE 19
BAG ARM TUBE
HOPPER BAG
PIVOT ROD
MOUNTING CLAMP MOUNTING CLAMP
WIND SCREEN WIND SCREEN
MOUNTING CLAMP MOUNTING CLAMP
PALNUT (H)
CAP (O)
CLEVIS PIN (J)
BAG ARM TUBE
HAIRPIN
COTTER (M)
11
ATTACHING SWEEPER HITCH TO TRACTOR
BLACK LINE IS TRACTOR HITCH
HITCH BRACKET MOUNTED
BELOW HITCH TUBES
BLACK LINE IS TRACTOR HITCH
HITCH BRACKET MOUNTED
ABOVE HITCH TUBES
FIGURE 21
• Placethetractorandsweeperonaatlevelsurface.
• Setthesweeperheightadjustmenthandletoabout
themiddleofitsadjustmentrange.
• Attachthesweeperhitchtothetractorhitch,
arrangingthe3/4"spacersinoneofsixpossible
combinationsasshowninGROUPAandGROUPB
diagramsbelow.
IMPORTANT:Toobtainthebestperformancefromyour
sweeper,arrangethespacerssothatthesweeperbagis
approximatelylevelwiththegroundandapproximately5"to
7"offthegroundasshowningure21.
GROUP "B" - For vehicles with hitches
having 10" to 13" ground clearance.
GROUP "A" - For vehicles with hitches
having 8" to 10" ground clearance.
12
KNOW YOUR SWEEPER
CAUTION:Keepsweeperawayfromre.
Excessiveheatcandamagethebrushesand
hopperbagandcouldcausethebagandits
contentstoburn.
CAUTION: Never attach the hopper rope
toanypartofyourbodyorclothing!Never
hold onto the rope while towing the sweeper!
Attach the rope to the towing vehicle to keep
it away from wheels and rotating parts.
DUMPING OF SWEEPER
• Yoursweepercanbedumpedeasilywithoutgetting
off of the rider or tractor. Simply pull the rope forward
todumpthehopper.Alwaysemptyhopperaftereach
use.
BRUSH HEIGHT ADJUSTMENT
• Toadjustyoursweeperbrushestothebestoperating
height,loosenthewingknobandpushdownonthe
heightadjustmenthandletoraisethebrush,orpush
uponthehandletolowerthebrush.Bestadjustment
iswhenthebrushsettingis1/2"downintothegrass.
Alwaysmowthegrasstoanevenheightbefore
sweeping.
SWEEPING SPEED
• Do not exceed 6 m.p.h.Tryastartingspeedof
approximately3m.p.h.(thirdgearonmosttractors).
Dependingontheconditions,itmaybenecessaryto
adjustthesweepingspeedinordertoachievebest
results.
OPERATION
HopperBag Collectsgrassclippings,leavesanddebris.
HopperRope  Permitsdumpingofhopperbagfromdriver'sseat.
Windscreen Helpspreventcollectedmaterialfrombeingblownoutofhopperbag.
BagArmTubes Connectsthehopperbagtothesweeperhousing.
PivotRod Allowshopperbagtotiltforwardtodumpmaterial.
HeightAdjustmentHandle Adjuststheoperatingheightofthesweeper.
HitchBracket  Connectsthesweepertothetowingvehicle.Adjustsforvariousheighttractorhitches.
WingKnob Tightensthewheelinpositionafteradjustingheight.
HOW TO USE YOUR SWEEPER
HOPPER BAG
WINDSCREEN
BAG ARM TUBE
PIVOT ROD
HEIGHT
ADJUSTMENT
HANDLE
HITCH
BRACKETS
HOPPER
ROPE
WING KNOB
CAUTION: Maximum towing speed is 6 m.p.h.
Drivingtoofastmaydamagewheelsandbearings.
13
MAINTENANCE
MAINTENANCESCHEDULE
Fill in dates as you
complete regular service.
Checkforloosefasteners X
Checkforwornordamagedparts X X
Clean,inspect&lubricatewheelbearings X
CleanSweeper X X
Clean,inspect&lubricategears X
FIGURE 23
CLEANING
• Cleansweeperhousingwithasoftbrushorcloth.
• Cleandebrisfromhopperbagwithabrushorbroom.
• Remove any material which has wrapped around
brushesorendsofbrushshaft.
CUSTOMER RESPONSIBILITIES
• Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
Before each use
Aftereachuse
Twiceayear
Everyyear
Before storage
ServiceDates
SCHEDULED MAINTENANCE
• Cleanthesweeperaftereachuse.
• Inspectforwornordamagedparts,suchasbrushes
and wheels.
• Everyyear,removethewheelsandcleanthegear
teethandtheteethonthebacksideofthewheel.
Aftercleaning,lubricatetheaxle,andtheteethon
the gears and the wheel with a light coat of grease.
Toremovetherightwheel,unscrewthewingknob
andremovethewheelandwashers.Toremovethe
leftwheel,popoffthehubcapusingascrewdriver
andremovewheelalongwiththebolt,washers,step
spacerandnut.Seegures22and23.
FIGURE 22
• Cleanthesweeperandhopperbagthoroughlytohelp
prevent rust and mildew.
• Tocollapsethehopperbagforstorage,removethe
two hopper support rods from the rear of the hopper.
• Store in a dry area.
CAUTION: Before storing the
sweeper,alwaysemptythehopperbagto
avoidspontaneouscombustion.
STORAGE
WASHER
WING KNOB
REMOVING RIGHT SIDE WHEEL
BOLT
WASHER
HUB
CAP
WASHER
STEP
SPACER
NYLOCK
NUT
REMOVING LEFT SIDE WHEEL
14
GEAR AND PAWL SERVICE
IMPORTANT: Do notremovebothwheelsatthesame
timetoavoidmixingofparts.(TheR.H.andL.H.pinion
gearsarenotinterchangeable.)Make notes on the
positionofwashersandsnapringsduringdisassembly.
• Remove one wheel at a time, following the instructions
intheMAINTENANCEsection.
• Remove the retaining rings which hold the gears on the
brushshaftandthejackshaft.
• Remove the pinion gear, washer and drive pin from the
endofthebrushshaft.(Thedrivepinmayfalloutofthe
brushshaftwhenthepiniongearisremoved.)
• Removetheidlergearandwashersfromthejackshaft.
• Cleanallparts.
• Replace worn parts.
• Toreassemble,lightlygreasethejackshaftandthe
brushshaft.Insertthepinintotheholeinthebrush
shaft.Makesurethepinstaysintheshaft.
• Lightlygreasetheteethonbothgearsandllthe
recessofthepiniongearwithgrease.Assembleboth
gearsbackontotheshafts.
• Lightlygreasetheaxleandthenreassemblethewheel
ontoit.Thebrushesshouldrotateonly during forward
rotationofthewheel.Ifthebrushesaredriven(rotated)
bybothforwardandreverserotationofthewheel,the
drivepinisjamminginthepiniongear.Disassemble
andcleanandlubricatethedrivepinandpiniongear.
BRUSH REPLACEMENT
NOTE: Brushreplacementshouldbedoneonebrushat
a time.
• Removethehopperbagfromthesweeper.
• Loosenthehexboltsandlocknutsontwosingle
brushretainerswhichclamponebrushtothedouble
brushretainers.Do Not loosenorremovethebolts
whichfastenthedoublebrushretainerstothebrush
shaft.Seegure24.
• Slidethebrushoutoftheretainers,notingonwhich
sideofthebrushthebristlesoverlap.Seegure24.
• Installnewbrush,makingsurethebristlesoverlapon
thesamesideofthebrushasbefore.Seegure24.
FIGURE 25
BRUSH ROTATION
BRUSH ROTATION
OVERLAP
BRISTLES
OVERLAP
BRISTLES
SINGLE
BRUSH
RETAINERS
DOUBLE BRUSH RETAINER
BRUSH
SHAFT
FIGURE 24
• Brushessettoolow.
• Brushesarejammed
• Wheelsarejammed.
Wheels skid when sweeping. • Adjustheighttillbrushesare1/2"
down into grass.
• Stopsweeper.Removeobstruction.
• Remove one wheel at a time to check
forobstructionordamage.Referto
ServiceandAdjustmentssection.
SERVICE AND ADJUSTMENTS
TROUBLESHOOTING
IDLER
GEAR
WASHER WASHER
RETAINING
RING
WASHER
PINION
GEAR
DRIVE
PIN
15
NOTES
16
REPAIR PARTS
486.24266 42" HIGH SPEED LAWNSWEEPER
1
2
3
4
5
6
7
8
10
11
12
14
13
13
15
16
17
21
20
20
19
18
22
23
26
25
26
22
27
29
28
27
30
32
31
33
41
33
33
42
43
33
41
33
33
41
33
41
44
46
46
46
46
46
46
46
47
47
45
48
48
49
49
51
53
54
54
51
55
55
56
56
59
58
52
52
60
61
50
17
50
17
57
57
7
37
38
19
39
40
35
34
36
Toorderreplacementparts,callSearsPartsDirect1-800-252-1698orgotowww.searspartsdirect.com
17
ITEM PART NO. QTY DESCRIPTION
1 67105 1 HousingAssembly
2 68202 1 HeightAdjustmentTubeAss'y.
3 46776 1 HitchTube,R.H.
4 46777 1 HitchTube,L.H.
5 24192 1 Bracket,Hitch(Straight)
6 23687 1 Bracket,Hitch
7 41436 2 Wheel&TireAss'y.(withbearings)
8 41570 2 DustCover
9 67103 1 WheelDriveAssembly,L.H.(Not
Shown)
10 67102 1 WheelDriveAssembly,R.H.
11 27235 1 Brush Shaft
12 46780 4 Brush,42"
13 23581 8 Retainer,Brush(Single)
14 23580 4 Retainer,Brush(Double)
15 43661 4 Bolt,Hex1/4-20x1"Lg.
16 43012 8 Bolt,Hex1/4-20x3/4"Lg.
17 47189 16 Nut,Nylock1/4-20Thread
18 43720 1 WingKnob
19 141 2 Washer,.378x1.25x.061
20 45088 4 Wheel Bearing
21 44008 2 Washer,1-1/8"x.78"x.025"
22 1650-1 4 Ring,Retaining(E-type)
23 48652 1 Gear,PinionR.H.
24 48651 1 Gear,PinionL.H.(notshown)
25 47046 2 DowelPin(Drive)
26 R19212016 4 Washer,.656x1.25x.025
27 44137 4 Washer,1/2"x1"x.02"
28 41434 2 IdlerGear,27T.
29 23520 2 Spacer,.660IDx.250ODx.25
30 44232 2 Ball Bearing
31 41437 2 Bearing Retainer
ITEM PART NO. QTY DESCRIPTION
32 43182 4 Bolt,Hex5/16-18x3/4"Lg.
33 47810 12 Nut,Nylock5/16-18Thread
34 27234 1 Retainer,CarriageBolt
35 42425 1 Bolt,Carriage5/16-18x3-1/2"
36 43943 1 Grip,HeightAdjust
37 41017 1 HubCap
38 43932 1 Bolt,Hex3/8-24x3-1/2"Lg.
39 26538 1 Spacer, Step
40 1038 1 Nut,Nylock3/8-24Thread
41 43084 4 Bolt,Hex5/16-18x1-3/4"Lg.
42 46782 2 Bolt,Hex5/16-18x3"Lg.
43 43224 2 Bolt,Hex5/16-18x2-1/4"Lg.
44 23353 1 Pin,Hitch
45 23368 2 Tube,HitchSpacer
46 43055 7 HairpinCotter,3/32"#3
47 46867 2 Pin,Clevis1/4"x1-1/2"Lg.
48 48365 2 Pin,Clevis1/4"x1-1/8"
49 48366 2 Pin,Clevis3/8"x1/2"
50 43978 4 CurvedHeadBolt,1/4-20x1"
51 44917 2 Palnut,3/8"
52 44481 2 Cap,Vinyl
53 46823 1 PivotRod,HopperBag
54 49766 2 Tube,BagArm
55 47477 2 Tube,RearHopperFrame
56 48726 2 Tube,LowerHopperFrame
57 49765 2 Tube,UpperHopperFrame
58 43938 2 HopperSupportRod
59 24189 1 Strap, Bag Frame
60 41751 1 HopperBag
61 43737 1 HopperRope
41750 1 OwnersManual
REPAIR PARTS
486.24266 42" HIGH SPEED LAWNSWEEPER
Toorderreplacementparts,callSearsPartsDirect1-800-252-1698orgotowww.searspartsdirect.com
18
19
® Registered Trademark /
TM
Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries
® Marca Registrada /
TM
Marca de Fábrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros países
Product questions or problems?
1-888-331-4569
Customer Care Hot Line
Get answers to questions, troubleshoot problems,
order parts, or schedule repair service.
Para respuestas a preguntas o problemas, y ordenar
piezas o pedir servicio para la reparación de su equipo.
To help us help you, register your product at www.craftsman.com/registration
Para poderte ayudar mejor, registra tu producto en www.craftsman.com/registration
Join the Craftsman Club today!
Receive exclusive member benefits including special pricing and offers,
project sharing, expert advice, and SHOP YOUR WAY REWARDS!
Como miembro exclusivo, recibe diversos beneficios como ofertas, precios especiales, proyectos
nuevos, consejos de expertos y nuestro programa de puntos SHOP YOUR WAY REWARDS!
/