Biostar M7VIG-D Owner's manual

Category
Motherboards
Type
Owner's manual
M
M
M
7
7
7
V
V
V
I
I
I
G
G
G
-
-
-
D
D
D
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or
fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here of without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we will not
be responsible for any mistakes found in this user’s manual. All the brand and
product names are trademarks of their respective companies.
C
C
C
o
o
o
n
n
n
t
t
t
e
e
e
n
n
n
t
t
t
s
s
s
ii
ENGLISH.............................................................................................1
M7VIG-D Features...........................................................................................................................1
Package contents ...........................................................................................................................2
Layout of M7VIG-D .........................................................................................................................3
CPU Installation...............................................................................................................................4
DDR DIMM Modules: DDR1-2.......................................................................................................5
Jumpers, Headers, Connectors & Slots ...................................................................................6
ESPOL..........................................................................................12
Caracter ístic as del M 7VIG- D......................................................................................................12
Contenido del Paqu ete................................................................................................................13
Disposicn del M7VIG-D............................................................................................................14
Instalacn del CPU......................................................................................................................15
Módulos DDR DIMM: DDR1-2....................................................................................................16
Conectores, C abezales, Puentes y Ranuras .........................................................................17
DEUTSCH..........................................................................................23
Merkmals des M7VIG-D ...............................................................................................................23
Verpackungsinhalt ........................................................................................................................24
Layout des M 7VIG-D ....................................................................................................................25
Installation der CPU .....................................................................................................................26
DDR-DIMM-Modules: DDR1-2....................................................................................................27
Jumpers, Headers, Connectors & Slots .................................................................................28
FRANÇAIS ........................................................................................35
Fonctionnalités de M7VIG-D......................................................................................................35
Contenu de l'Emballage ..............................................................................................................36
Schéma de M7VIG-D ....................................................................................................................37
Installation du CPU.......................................................................................................................38
Modules DIMM DDR: DDR1-2.....................................................................................................39
Cavaliers, Embases, Connecteurs & Slots ............................................................................40
日本語................................................................................................46
M7VIG-D の機能..............................................................................................................................46
パッケ内容 .................................................................................................................................47
M7VIG-D のレアウ.....................................................................................................................48
CPU のイ .........................................................................................................................49
DDR DIMMモジュ: DDR1-2...................................................................................................50
ジャコネ.................................................................................................51
WARPSPEEDER................................................................................57
Introduction....................................................................................................................................57
System Requirement ...................................................................................................................57
Installation ......................................................................................................................................58
Usage...............................................................................................................................................59
TROUBLE SHOOTING.......................................................................68
SOLUCN DE PROBLEMAS............................................................69
C
C
C
o
o
o
n
n
n
t
t
t
e
e
e
n
n
n
t
t
t
s
s
s
iii
PROBLEMLÖSUNG...........................................................................70
トラ ルシーテング...............................................................................71
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
1
English
M7VIG-D Features
CPU
- Supports the single AMD Socket A for Athlon
TM
(Thunderbird
TM
)/ Athlon
XP
TM
/ Duron
TM
processors.
- Running at 200/ 266MHz Front Side Bus.
Chipset
- North Bridge: VIA VT8375 (KM266) Chipset.
- South Bridge: VT8235 Chipset.
Main Memory
- Supports up to 2 DDR devices.
- Supports 200/266MHz (without ECC) devices.
- The largest memory capacity is 2GB.
Sl ots
- One AMR slot.
- Two 32-bit PCI Bus slots.
- One AGP slot.
Onboard IDE
- Supports IDE hard disk drives.
- Supports Ultra 133/ 100/ 66/ 33, PIO modes, LBA mode.
On Board VGA
- Integrate S3 Graphics 128-bit ProSavage 8 graphics accelerator.
Audio
- AC97 2.2 compatible.
- PC99 complaint.
- Supports 2 speaker out channels.
On Board Peripherals
- Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers.
- Supports 1 serial port.
- Supports 1 VGA port.
- Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode)
- Supports PS/2 mouse and PS/2 keyboard.
- Supports 2 rear USB1.1 and USB2.0 ports
- Supports 4 front USB1.1 and USB2.0 ports.
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
2
BIOS
- AWARD legal Bios.
- Supports APM1.2.
- Supports ACPI.
- Supports USB Function.
Operating System
- Offers the highest performance for Windows 98SE, Windows NT, Windows
2000, Windows Me, Windows XP, LINUX and SCO UNIX.
Dimensions
- Micro ATX Form Factor: 22.9cm X 21.3cm (W X L)
Package contents
- HDD Cable X 1
- FDD Cable X 1
- Fully Setup Driver CD X 1
- Users Manual X 1
- USB Cable X 2 (Optional)
- Rear I/O Panel for Micro-ATX Case X 1 (Optional)
- SPDIF OUT Cable X1 (Optional)
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
3
Layout of M7VIG-D
JPRNT1
JCOM1
JVGA1
JKBMS1
JUSB4
VT8375
(KM 266)
JCFAN1
1
FDD1
PRIMARY IDE CONN.
JATXPWER1
Winbond
I/O
1
JSFAN1
JPANEL1
12
IDE1 IDE2
JCMOS1
BAT1
2324
1
V
T 8235
SECONDARY IDE CONN.
DDR2
DDR1
JUSBV2
1
1
JK B V1
PCI2
PCI1
JW O L1
1
JCODECSEL
1
1
2
9
10
Codec
Phy
JU SB3
2
9
10
1
JUSBV3
1
JU SBV1
1
1
JUSBLAN1
JAUDIO
JGAME1
1
216
15
BIOS
1
1
LAN
Phy
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
4
CPU Installation
1. Pull the lever sideways away from the socket then raise the lever up to
90-degree angle.
2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU.
Match Pin A with the white dot/cut edge then insert the CPU.
3. Press the lever down. Then Put the fan on the CPU and buckle it and put the
fan’s power port into the JCFAN1, then to complete the installation.
CPU/ System Fan Headers: JCFAN1/ JSFAN1
C
P
U
JCFAN1
1
Ground
12V
Sense
JSFAN1
Ground
12V
Sense
1
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
5
DDR DIMM Modules: DDR1-2
DRAM Access Time: 2.5V Unbuffered DDR 200/266MHz (without ECC) Type
required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
DIMM Socket
Location
DDR Module Total Memor
y
Size (MB)
DDR 1 64MB/128MB/256MB/512MB/1GB
*1
DDR 2 64MB/128MB/256MB/512MB/1GB
*1
Max is
2GB
* The list shown above for DRAM configuration is only for reference.
How to install a DIMM Module
1. The DIMM socket has a “ Plastic
Safety Tab”, and the DIMM memory
module has an “Asymmetrical notch”, so
the DIMM memory module can only fit
into the slot in one direction.
2. Push the tabs out. Insert the DIMM
memory modules into the socket at a
90-degree angle, then push down
vertically so that it will fit into the place.
3. The Mounting Holes and plastic tabs
should fit over the edge and hold the
DIMM memory modules in place.
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
6
Jumpers, Headers, Connectors & Slots
Hard Disk Connectors: IDE1/ IDE2
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100/ 133 functionality. It has
two HDD connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slave drive, so you can connect
up to four hard disk drives. The first hard drive should always be connected to
IDE1.
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.
Audio Modem Riser Slot: AMR1
(Only support slave card)
The AMR specification is an open Industry Standard Architecture and that defines
a hardware scalable riser card interface, which supports audio and modem only.
Peripheral Component Interconnect Slots: PCI1-2
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion cards.
This PCI slot is designated as 32 bits.
Accelerated Graphics Port Slot: AGP1
Your monitor will attach directly to that video card. This motherboard supports
video cards for PCI, but it is also equipped with an Accelerated Graphics Port
(AGP). An AGP card will take advantage of AGP technology for improved video
efficiency and performance, especially with 3D graphics.
Power Connectors: JATXPWR1
JATXPWR1
(ATX Power Conn.)
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
7
Wake On LAN Header: JWOL1
Clear CMOS Jumper: JCMOS1
Front USB Header: JUSB3
JCMOS1
Clear CMOS
Data
Pin 1-2 on
Normal
Operation
(default)
Assignment
1
Pin 2-3 on
1
JUSB3
2
1
Pin Assignment Pin Assignment
12
43
56
87
910
+5V +5V
Data (-)Data (-)
Data (+) Data (+)
Ground Ground
Key NA
JWOL1
1
5V_SB Wake up
Ground
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
8
5V/ 5VSB Selection for USB: JUSBV1/2/3
CPU Frequency Selection:
JCLK1
5V/ 5VSB Selection for Keyboard: JKBV1
AMR Codec Primary/ Secondary Selection: JCODECSEL
JUSBV1/2/3
5V_SB
Pin 1-2 on
5V
Assignment
1
Pin 2-3 on
1
JKBV1
5V_SB
Pin 1-2 on
5V
Assignment
1
Pin 2-3 on
1
Pin 1-2 On-board Primary
Codec (Default).
1
Pin 2-3 AMR Primary Codec.
Assignment
JCODECSEL
1
1
JCLK1
Close ==> 100 MHz
Open ==> 133 Mhz
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
9
Case Open Connector: JCI1
Front Panel Connector: JPANEL1
Digital Audio Connector: JSPDIF1 (Optional)
JSPDIF1
1
SPDIF_OUT
5V GND
JCI1
Case Open
No jumper
installed
Normal
Operation
(default)
Assignment
1
Pin 1-2 on
1
SPK ==> Speaker Conn.
HLED ==> Hard Driver LED
RST ==> Reset Button
IR ==> Infrared Conn.
SLP ==> Sleep Button
PWR_LED ==> Power LED
ON/ OFF ==> Power-on Button
SPK
PWR_LED
HLED
SLP
RST
224
IR
123
IRON/OFF
(+) (-)
(+) (-)(+)
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
10
Audio Subsystem: JF_AUDIO/ JCDIN1
12
Front Panel Audio Connector/ Jumper Block
910
Audio line out signals are routed
to the back panel audio line out connector.
Pin 5 and 6
Pin 9 and 10
Audio line out and mic in signals are
ava ilable for front panel audio connectors.
3
5
7
4
6
12
910
3
5
7
4
6
No jumpers
installed
Jumper Setting Configuration
1
2
JAUDIO1
(Front Audio Header)
1
JCDIN1
(CD-ROM Audio-In Header)
1
2
JF_AUDIO
(Front Audio Header)
1
JCDIN1
(CD-ROM Audio-In Header)
2
JF_AUDIO
1
2
10
9
Pin
1
3
5
7
9
Pin
2
4
6
8
10
Mic In
Mic Power
RT Line Out
Reserved
LFT Line Out
Assignment
Ground
Audio Power
RT Lin e Out
Key
Assignment
LFT Line Out
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
11
Game Header: JGAME1
Back Panel Connectors
PS/2
Keyboard
PS/2
Mouse
Parallel
JPRNT1
JCOM1
JKBMS1
US B
JUS B4
COM1
JVGA1
VGA1 USB
JUSBLAN1
Speaker
Out
Line In
Mic In
JAUDIO
LA N
1
216
15
JGAME1
Pin Assignment Pin Assignment
1
34
5
7
9
2
6
8
10
12
13
11
14
1615
+5V +5V
GP4GP6
GP2 GP0
Ground
MIDI-OUTR
GP3 Ground
GP1
GP5
+5V
GP7
MIDI-INR
NC
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
12
Español
Características del M7VIG-D
CPU:
- Soporta procesadores single AMD Socket A para Athlon
TM
(Thunderbird
TM
)/
Athlon XP
TM
/ Duron
TM
.
- Corre a 200/ 266MHz Front Side Bus.
Chipset:
- North Bridge: VIA VT8375 (KM266).
- South Bridge: VT8235.
Memoria Principal
- Soporta hasta 2 dispositivos DDR.
- Soporta dispositivos 200/ 266MHz (sin ECC).
- Capacidad máxima de memoria de 2GB.
Ranuras
- Una ranura AMR.
- Dos ranuras PCI Bus 32-bit.
- Una ranura AGP.
IDE Onboard
- Soporta discos duros IDE.
- Soporta Ultra 133/ 100/ 66/ 33, modos PIO, modo LBA.
VGA Onboard
- Integrate S3 Graphics 128-bit ProSavage 8 acelerador gráfico.
Audio
- AC97 2.2 compatible.
- PC99 compatible.
- Soporta 2 canales de salida del altavoz.
Periféricos Onboard
- Soporta 360K, 720K, 1.2MB, 1.44MB y 2.88MB tipos de disquette.
- Soporta 1 puerto serie.
- Soporta 1 puerto VGA.
- Soporta 1 puerto paralelo multi-modo. (modos SPP/EPP/ECP)
- Soporta ratón PS/2 y teclado PS/2.
- Soporta 2 puertos USB1.1 y USB2.0 traseros.
- Soporta 4 puertos USB1.1 y USB2.0 frontales.
BIOS
- AWARD legal Bios.
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
13
- Soporta APM1.2.
- Soporta ACPI.
- Soporta función USB.
Sistemas Operativos
- Ofrece el más alto funcionamiento para Windows 98SE, Windows NT,
Windows 2000, Windows Me, Windows XP, LINUX y SCO UNIX.
Dimensiones
- Factor de Forma Micro ATX: 22.9cm X 21.3cm (W X L)
Contenido del Paquete
- Cable HDD X 1
- Cable FDD X 1
- Completa Configuracn del Driver CD X 1
- Manual del Usuario X 1
- Cable USB X 2 (Opcional)
- Panel Trasero I/O para Carcasa Micro-ATX X 1 (Opcional)
- Cable SPDIF OUT X1 (Opcional)
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
14
Disposicn del M7VIG-D
JPRNT1
JCOM1
JVGA1
JKBMS1
JUSB4
VT8375
(KM 266)
JCFAN1
1
FDD1
JATXPWER1
Winbond
I/O
1
JSFAN1
JPANEL1
12
IDE1 IDE2
JCMOS1
BAT1
2324
1
V
T 8235
DDR2
DDR1
JUSBV2
1
1
JKBV1
PCI2
PCI1
JW O L1
1
JCODECSEL
1
1
2
9
10
Codec
Phy
JUSB3
2
9
10
1
JUSBV3
1
JUSBV1
1
1
JUSBLAN1
JAUDIO
JGAME1
1
216
15
BIOS
1
1
LAN
Phy
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
15
Instalación del CPU
1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un
ángulo de 90 grados.
2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la
CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego
inserte la CPU.
3. Presione la palanca para abajo. Ponga el ventilador en la CPU y abchelo.
Luego ponga el puerto de corriente del ventilador en el JCFAN1. Y ya
habrá completado su instalación.
CPU/ Cabezales del Sistema de Ventilación: JCFAN1/ JSFAN1
C
P
U
JCFAN1
Tierra
12V
Sense
1
JSFAN1
Tierra
12V
Sense
1
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
16
Módulos DDR DIMM: DDR1-2
DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/ 266 MHz (sin ECC) Tipo
requerido.
DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 pin)
Localización
del Módulo
DIMM
Módulo DDR
Total del
Tamaño de
Memoria (MB)
DDR 1 64MB/128MB/256MB/512MB/1GB
*1
DDR 2 64MB/128MB/256MB/512MB/1GB
*1
ximo de
2GB
* La lista de arriba para la configuración DRAM es solamente para referencia.
Cómo instalar un Módulo DIMM
1. El zócalo DIMM tiene una lengüeta
plástica de seguridad y el módulo de
memoria DIMM tiene una muesca
asimétrica, así el módulo de memoria
DIMM puede caber solamente en la ranura
de una sóla dirección.
2. Tire la lengüeta hacia afuera. Inserte
los módulos de memoria DIMM en el
zócalo a los 90 grados, luego empuje hacia
abajo verticalmente de modo que encaje
en el lugar.
3. Los agujeros de montaje y las lengüetas
plásticas deben caber por sobre el borde y
sostenga los módulos de memoria DIMM
en el lugar.
M
M
M
o
o
o
t
t
t
h
h
h
e
e
e
r
r
r
b
b
b
o
o
o
a
a
a
r
r
r
d
d
d
D
D
D
e
e
e
s
s
s
c
c
c
r
r
r
i
i
i
p
p
p
t
t
t
i
i
i
o
o
o
n
n
n
17
Conectores, Cabezales, Puentes y Ranuras
Conectores del Disco Duro: IDE1/ IDE2
La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo
PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. Tiene dos
conectores HDD IDE1 (primario) y IDE2 (secundario).
El conector IDE puede conectar a un master y un drive esclavo, así puede
conectar hasta cuatro discosgidos. El primer disco duro debe estar siempre
conectado al IDE1.
Conector para el Disquete: FDD1
La placa madre proporciona un conector estándar del disquete (FDC) que
soporta 360K, 720K, 1.2M, 1.44M y 2.88M tipos de disquete. Éste conector utiliza
los cables de cinta proporcionados por el disquete.
Ranura Audio y Módem Riser: AMR1
La especificación AMR es una Arquitectura de Industria Estándar y define una
tarjeta elevadora de interface del hardware en el que soporta solamente audio y
módem.
Ranura de Interconexión del Componente Periférico: PCI1-2
Ésta placa madre está equipada con 2 ranuras estándar PCI. PCI es la sigla para
Interconexión del Componente Periférico, y es un bus estándar para tarjetas de
expansión. Ésta ranura PCI está diseñado con 32 bits.
Ranura del Puerto Acelerado para Gráficos: AGP1
Su monitor se fija directamente a la tarjeta de video. Ésta placa madre
soporta tarjetas de video para PCI, pero también está equipada con puerto AGP.
La tarjeta AGP tomará ventaja de la tecnología del AGP para el mejoramiento de
la eficiencia y funcionamiento del video, especialmente con gráficos 3D.
Conectores de Corriente: JATXPWR1
JATXPWR1
(Conector de
Corriente ATX)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107

Biostar M7VIG-D Owner's manual

Category
Motherboards
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI