Hunter 52006 Owner's manual

Brand: Hunter

Model: 52006

Category: Household fans

Type: Owner's manual

This manual is also suitable for

NULL

Hunter 52006 is a ceiling fan suitable for indoor use, featuring adjustable speeds and reversible airflow for year-round comfort. It comes with a remote control for convenient operation and includes a light kit for added functionality. The fan's installation requires wiring and mounting to a support structure or fan-rated outlet box, and it is recommended to consult an electrician if unfamiliar with wiring.

www.HunterFan.com

1.888.830.1326

Table of Contents

PAGE

Wiring

PAGE

Downrod

PAGE

Preparation Canopy

PAGE

Ceiling Bracket

Mounting Options

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation

Ladder

PAGE

Tools Needed

Congratulations on purchasing

your new Hunter® ceiling fan! It will

provide comfort and performance

in your home or ofce for many

years. This installation and operation

manual contains complete

instructions for installing and

operating your fan.

We are proud of our work and

appreciate the opportunity to

supply you with the best ceiling fan

available anywhere in the world.

To register your fan, please visit:

www.HunterFan.com/register

Save your receipt for proof of purchase.

PAGE

Troubleshooting

PAGE

Light Kit

PAGE

Switch HousingBlades

PAGE

Operation

Maintenance

& Cleaning

PAGE

Remote Control

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

1.888.830.13261.888.830.1326

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip

to nearest wall

or obstruction

7 feet

from bottom

edge of blade

to the oor

Select a downrod length

Assess ceiling angle

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Ceiling angles greater

than 34° will require an

Angled Mounting Kit.

See page 4 for details.

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg)

and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the

circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Hunter Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

c.1 - All wiring must be in accordance with national and local

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,

use a qualied electrician.

c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions may cause

harmful interference to radio communications.

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

Tools Needed

Ladder

Power Drill

(optional)

9/64” Drill Bit

(optional)

Screwdrivers

Pliers Wire Strippers

If mounting to a support structure, you will also need these tools.

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

Mounting Options (continued)

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will

also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

Guide Touches

Wall

but

NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

You need ONLY

a Longer

Downrod

*most common

If you have a at ceiling:

Hang your fan by a standard downrod (included).

Mounting Options

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

CEILING

WALL

OPTION

Standard

Mounting

OPTION

Angled

Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

www.HunterFan.com

1.888.830.1326

Ceiling Bracket

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

For angled ceilings, point

opening toward peak.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Make sure all four bumpers are

still attached.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

OFF

Turn Power

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

Preparation

Remove the shipping blocks from the

motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

Time Saver Tip: Get a helper

to insert grommets, found in

the hardware bag, into the

blades while you’re doing the

next couple of steps.

If you are installing multiple remote-controlled

fans on the same circuit breaker,

you may need to perform a few extra steps to

prevent interference or faulty operation of your

remote controls.

Go to www.HunterFan.com/FAQs and click

“How do I properly install multiple remote-

controlled fans?” for more information.

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Included

Longer

Downrod

for angled

ceilings or

ceilings 10’ or

higher

Shorter

Downrod

for fans installed

close to ceiling

Standard

Downrod

for ceilings 8-10’ high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

KEEP!

8”

3/8”

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8”

3/8”

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened

securely, the fan may fall.

www.HunterFan.com

1.888.830.1326

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Put the wires and downrod through

the canopy. Let the canopy sit loosely

on top of the fan.

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

Wiring

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

Using an orange wire

connector from

the hardware

bag, connect the

3 grounding wires

(green, green/yellow

stripe, or bare copper)

coming from the

ceiling, downrod, and

hanging bracket.

green/yellow

stripe (grounding)

green/yellow

stripe

green/yellow stripe

black

blue

yellow

blue

Note: To connect the

wires, hold the bare

metal leads together and

place a wire connector

over them, then twist

clockwise until tight.

Using the orange

wire connectors

from the remote

control hardware

bag, connect the blue

wire from the receiver

to the blue wire (or

possibly black with

white stripe wire) from

the fan. Connect the

yellow wire from the

receiver to the black

wire from the fan.

Using the orange wire

connectors from

the hardware bag,

connect the black wire

(ungrounded) from

the ceiling to the black

wire from the receiver.

Connect the white

wire (grounded) from

the ceiling to both the

white wire from the

receiver and the white

wire from the fan.

black

(ungrounded)

white (grounded)

black

white

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

Canopy

Lift the canopy into place so that

the screw holes are aligned.

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Screw

Holes

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

Blades

Your blades are shielded with Dust Armor® which

is a nanotechnology coating that repels dust. For

cleaning the fan, use soft brushes or cloths to prevent

scratching. Cleaning agents may damage the nishes.

Insert grommets found in the hardware

bag into the holes in the blades, then

secure each blade to a blade iron with

screws found in the hardware bag.

Lightly attach the blade irons to the

motor with screws found in

the hardware bag, then securely

tighten after both screws are attached.

Remember the screws that

you kept after removing the

shipping blocks (page 6)? You

need them plus ve more from

the hardware bag for this step.

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

Switch Housing

Feed the wire plug through the center

hole of the upper switch housing, then

wrap keyhole slots around the screws and

twist counterclockwise.

Screw two housing assembly screws

from the hardware bag halfway into

the motor housing. It does not matter

which two screw holes you choose.

Insert the third screw, found in

the hardware bag, into place and

then tighten all three screws.

Make sure the upper switch housing is securely

attached to the mounting plate. Failure to properly

secure all 3 assembly screws could result in the switch

housing xture falling.

M0065-01 • 05/13/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

M0065-01 • 05/13/14 • © Hunter Fan Company

Connect the plugs from the upper and

lower switch housings. Make sure to line

up the colored markings on

the connectors.

Partially install two of the switch housing

screws found in the bag. Align the

notches in the sides of the lower switch

housing with the upper switch housing

screws. Twist the lower switch housing

clockwise to lock into place.

Light Kit

Install the third switch housing screw.

Tighten all three screws securely.

Switch

Housing

Screw

Notch

Make sure the lower switch housing is securely attached to

the upper switch housing. Failure to properly secure all three

assembly screws could result in the light xture falling.

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click

“How do I install my fan without the light kit?”

www.HunterFan.com

1.888.830.1326

Light Kit (continued)

Note: Glass shade style and number of lights may vary.

Install a bulb into each of the

sockets. When necessary, replace

with bulbs of the same wattage.

Bulb

To install the shade, rst loosen

the thumb screws. Raise the

shade to the light xture. Tighten

all thumbscrews securely.

Shade

Thumb Screw

Connect the appropriate pull chain

pendant to each of the short chains

coming from the switch housing.

Fan Pull

Chain

Light

Pull

Chain

www.HunterFan.com

1.888.830.1326

Remote Control

Note: The remote must be paired before

the fan will operate.

Within 3 minutes of restoring power to

the fan, press both the Fan Off button and

the High button for at least 4 seconds. Your

fan will turn on low to indicate successful

syncing. If it does not, turn off power to your

fan, wait 1 minute then try again. If using the

transmitter with multiple fans, repeat this

process for each fan.

Fan Off

High

To access the battery compartment, remove

the small Phillips head screw that secures the

battery door to the transmitter assembly. The

battery should be installed with the positive

(+) side up. Replace with a CR2032 battery

when necessary.

Phillips

Head

Screw

Battery

Door

Turn Power

If you are installing multiple remote-controlled fans on

the same circuit breaker, you may need to perform a few

extra steps to prevent interference or faulty operation of

your remote controls.

Go to www.HunterFan.com/FAQs and click

“How do I properly install multiple remote-controlled fans?”

for more information.

www.HunterFan.com

1.888.830.1326

Remote Control (continued)

Light Button

Push the light button on the remote transmitter.

Pull the light chain once. If the light does not

turn on, repeat step.

Light Chain

Push the 3 button on the remote transmitter for

high fan speed. Pull the fan speed chain until

the fan is on the highest speed.

3 Button

Fan Speed Chain

See next page for fan

operation instructions.

Light Button

CONGRATULATIONS!

YOU’RE DONE!

www.HunterFan.com

1.888.830.1326

Rocker- Style Plate

Switch Cover Plate

Removed Tabs

To install the transmitter cradle, remove the

two screws holding the switch cover plate. Do

not remove the cover plate. Orient the cradle

by lining up the two mounting holes with

those on the cover plate. Insert and tighten

the screws. Do not over tighten.

Note: For rocker-style cover plates, break off

the tabs by pushing outward.

To turn on fan, press a fan speed button. Speeds

range from off (0) to high (3). Quickly press the

Light button to turn the lights off and on.

Medium

Speed

Light

High

Speed

Fan

Off

Low

Speed

Operation, Maintenance, & Cleaning

To switch the direction of air ow, move the

reverse switch to the opposite position.

Reverse

Switch

www.HunterFan.com

1.888.830.1326

For questions regarding removing a light kit, call

customer service 1-888-830-1326.

Operation, Maintenance, & Cleaning (continued)

For cleaning the fan, use soft brushes or

cloths to prevent scratching. Cleaning

products may damage the nishes.

Safe-Exit

• Press the Fan Off button for at least three seconds to

initiate the Safe-Exit Mode.

• The lights will ash for visual conrmation.

• The lights will stay on 50% brightness for 15 seconds and

then begin to dim. After a total of 30 seconds, the lights

will be completely off.

The Safe-Exit Program gives you about thirty seconds

of light when you turn the lights off to exit the room

before the lights go out. To use Safe-Exit:

Note: For CFL lighting, the lights will stay on 100%

brightness for 30 seconds. After a total of 30 seconds, the

lights will be completely off.

www.HunterFan.com

1.888.830.1326

Troubleshooting

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure it

is on.

• Push the motor reversing switch

rmly left or right to ensure that it

is engaged.

• Check the circuit breaker to

ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy

and check all the connections

according to the wiring diagram

on page 10.

• Make sure the battery is working.

• Check the plug connection in the

switch housing.

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check

that the hanger ball is properly

seated.

• Use the provided balancing

kit and instructions to balance

the fan.

Remote control of fan is erratic

• Make sure the battery is

installed correctly.

• Install a fresh battery.

Transmitter only works when held

at close range

• Change battery.

CFL bulbs flicker

• Turn the light switch off and

back on. Within three minutes,

hold down the Fan Off button

while pressing the Light button

twice. If the problem is not

corrected, repeat the process

up to three times.

Noisy operation

• Tighten the blade and blade iron

screws until they are snug.

• Check to see if any of the blades

are cracked. If so, replace all of

the blades.

Fan Runs Slowly

• Turn the power to the fan off at

the wall switch. Then, turn it on

again. Push the 3 button on the

remote transmitter for high fan

speed. Then, pull the fan speed

chain until the fan is on the

highest speed.

If you have multiple remotes or

multiple remote-controlled fans

installed on the same circuit

breaker and you are experiencing

interference or faulty operation of

your remote controls, please go to

www.HunterFan.com/FAQs

and click “How do I properly install

multiple remote-controlled fans?”

for information on how to correct

this issue.

Hunter 52006 Owner's manual

Brand: Hunter

Model: 52006

Category: Household fans

Type: Owner's manual

This manual is also suitable for

NULL

Download PDF

report

Hunter 52006 Owner's manual

This manual is also suitable for

Hunter 52006 Owner's manual

Related papers

Other documents