DVD Changer
DV-CP701
Instruction Manual
Thank you for purchasing the Onkyo DV-CP701 DVD
Changer. Read this manual carefully before using your
new DVD Changer. A good understanding of its features
and operation will allow you to achieve optimum perfor-
mance and enjoyment.
Keep this manual for future reference.
Contents
Important Safety Instructions...........3
Precautions .......................................4
Introduction .......................................6
Controls & Connectors ...................10
Before Using the DV-CP701 ...........15
Connecting the DV-CP701 ..............16
Connecting -compatible AV
Components .................................19
Powering Up & Setting Up the
DV-CP701 ....................................... 20
Basic Playback ................................21
Advanced Playback ........................ 31
Configuring the DV-CP701 .............38
Troubleshooting ..............................45
Specifications .................................47
En
2
Contents
Important Safety Instructions ............................3
Precautions .........................................................4
Introduction .........................................................6
Supplied Accessories.........................................6
DV-CP701 Features...........................................6
Disc Notes..........................................................7
DV-CP701-related Terminology.........................9
Controls & Connectors......................................10
Front Panel .......................................................10
Display ..............................................................11
Rear Panel ........................................................12
Remote Controller.............................................13
Before Using the DV-CP701 ..............................15
Installing the Remote Controller’s Batteries......15
Using the Remote Controller.............................15
Connecting the DV-CP701.................................16
Before Making Any Connections.......................16
AV Cables & Connectors ..................................16
Connecting Your TV or Projector ......................17
Connecting Your Hi-Fi Amp ..............................18
Connecting for Dolby Digital or DTS .................18
Connecting -compatible AV Components..19
Connection Diagram .........................................19
Powering Up & Setting Up the DV-CP701........20
Powering Up the DV-CP701 .............................20
First Time Setup................................................20
Basic Playback...................................................21
Loading & Removing Discs...............................21
Loading Discs During Playback ........................21
Selecting Discs .................................................22
Starting, Pausing & Stopping Playback ............22
Navigating Disc Menus .....................................24
Selecting Titles & Chapters by Number ............25
Using the Disc Navigator ..................................26
Memory Playback in the Disc Navigator ...........27
Selecting Tracks by Number.............................28
Fast Forward & Reverse ...................................28
Frame-by-Frame Playback ...............................29
Slow-motion Playback.......................................29
Adjusting the Display Brightness ......................29
Using JPEG CDs ..............................................30
Using Chain Mode ............................................30
Advanced Playback...........................................31
Locating Specific Points in Time ...................... 31
Repeat Playback.............................................. 31
A–B Repeat Playback ...................................... 32
Random Playback............................................ 32
Memory Playback............................................. 33
Selecting Camera Angles................................. 34
Selecting Languages & Audio Formats............ 35
Selecting Subtitles............................................ 35
Using Progressive Scanning............................ 35
Using Last Memory .......................................... 36
Displaying Information...................................... 37
Configuring the DV-CP701................................38
Using the Onscreen Setup Menus ................... 39
Picture Menu.................................................... 39
Audio Menu...................................................... 41
Language Menu ............................................... 41
Display Menu ................................................... 42
Operation Setting Menu ................................... 43
Initial Setup Menu ............................................ 44
Selecting Other Languages.............................. 44
Language Code List......................................... 44
Troubleshooting ................................................45
Specifications ....................................................47
3
Important Safety Instructions
1.
Read Instructions
– All the safety and operating instructions
should be read before the appliance is operated.
2.
Retain Instructions
– The safety and operating instructions
should be retained for future reference.
3.
Heed Warnings
– All warnings on the appliance and in the
operating instructions should be adhered to.
4.
Follow Instructions
– All operating and use instructions
should be followed.
5.
Water and Moisture
– Do not use the appliance near water
–for example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub; in a wet basement; or near a swimming pool; and the
like.
6.
Cleaning
– Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned with a dry cloth or
only as recommended by the manufacturer.
7.
Ventilation
– Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the appliance
and to protect it from overheating, and these openings must not
be blocked or covered. Do not use the appliance on a bed, sofa,
rug, or other such surface. Newspapers, table clothes, curtains,
and other items can inadvertently block ventilation slots. Do
not place the unit near curtains that could obstruct the ventila-
tion. If you install the appliance in a built-in installation, such
as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides and 10 cm
(4") at the rear. The rear edge of the shelf or board above the
appliance should be set 10 cm (4") away from the rear panel or
wall, creating a flue-like gap for warm air to escape.
8.
Heat
– The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other appli-
ances (including amplifier) that produce heat.
9.
Grounding or Polarization
– The appliance may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized or grounding-type plug.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.
Power-Cord Protection
– Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
11.
Attachments
– Do not use attachments not recommended
by the appliance manufacturer as they may cause hazards.
Accessories
– Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the appliance.
Any mounting of the appliance
should follow the manufacturer’s
instructions, and should use a
mounting accessory recommended
by the manufacturer.
12. An appliance and cart combination
should be moved with care to avoid
injury from tip-over.
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to
overturn.
13.
Lightning
– For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and discon-
nect the antenna or cable system. This will prevent damage to
the appliance due to lightning and power-line surges.
14.
Servicing
– Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring Service
– Unplug the appliance form the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in perfor-
mance – this indicates a need for service.
15.
Object and Liquid Entry
– Never push objects of any kind
into the appliance through openings as they may touch danger-
ous voltage points or short-out parts that could result in a fire or
electric shock.
The appliance should not be exposed to dripping or splashing
and no objects filled with liquids, such as vases should be
placed on the appliance.
Don’t put candles or other burning objects on top of this unit.
16.
Batteries
– Always consider the environmental issues and fol-
low local regulations when disposing of batteries.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
4
Precautions
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT
STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT.” So, to use this model prop-
erly, read this Instruction Manual carefully. In case of any trou-
ble, please contact the store where you purchased the unit. To
prevent exposure to the laser beam, do not try to open the enclo-
sure.
In some cases, this label is located on the rear panel. It indicates
that:
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. model
The laser is covered by a housing which prevents exposure dur-
ing operation or maintenance. However, this product is classi-
fied as a Laser Product by CDRH (Center for Devices and
Radiological Health) which is a department of the Food and
Drug Administration.
According to their regulations 21 CFR section 1002.30, all man-
ufactures who sell Laser Products must maintain records of writ-
ten communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any com-
plaints about instructions or explanations affecting the use of
this product, please feel free to write to the address on the back
page of this manual. When you write us, please include the
model number and serial number of your unit.
In compliance with Federal Regulations, the certification, iden-
tification and the period of manufacture are indicated on the rear
panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
For Canadian model
For models having a power cord with a polarized plug:
CAUTION
:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
NOTE:
This Class B digital apparatus complies with Canadian
ICES-003.
Modèle canadien
Sur les modèles dont la fiche est polarisée:
ATTENTION
:
POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
REMARQUE:
CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 DU
CANADA.
5
Precautions—
Continued
1. Region Numbers
The DVD standard uses region numbers to control how discs can
be played around the world, the world being divided into six
regions. This unit will only play DVD discs that match its region
number, which can be found on its rear panel (e.g., ).
2. About this Manual
This manual explains how to use all of this unit’s functions.
Although the DVD standard offers many special features, not all
discs use them all, so depending on the disc being played, this
unit may not respond to certain functions. See the disc’s sleeve
notes for supported features.
When you attempt to use a DVD feature that is not
available, this logo may appear onscreen, indicating
that the feature is not supported by the current disc or
this unit.
3. Warranty
If you need to use the warranty, please provide the serial number
printed on this unit’s rear panel.
4. Recording Copyright
Unless it’s for personal use only, recording copyrighted material
is illegal without the permission of the copyright holder.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country. Make sure that
the voltage in your area meets the voltage requirements printed
on this unit’s rear panel (e.g., AC 120 V, 60 Hz).
6. Never Touch this Unit
with Wet Hands
Never handle this unit or its power cord while your hands are
wet or damp. If water or any other liquid gets inside this unit,
have it checked by your Onkyo dealer.
7. Installing this Unit
• Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around this unit,
especially if it’s installed in an audio rack. If the ventilation is
inadequate, the unit may overheat, leading to malfunction.
• Do not expose this unit to direct sunlight or heat sources,
because its internal temperature may rise, shortening the life
of the optical pickup.
•Avoid damp and dusty places, and places subject to vibrations
from loudspeakers. Never put the unit on top of, or directly
above a loudspeaker.
• Install this unit horizontally. Never use it on its side or on a
sloping surface, because it may cause a malfunction.
• If you install this unit near a TV, radio, or VCR, the picture and
sound quality may be affected. If this occurs, move this unit
away from the TV, radio, or VCR.
8. Care
Occasionally, you should dust this unit all over with a soft cloth.
For stubborn stains, use a soft cloth dampened with a weak solu-
tion of mild detergent and water. Dry the unit immediately after-
wards with a clean cloth. Do not use abrasive cloths, thinners,
alcohol, or other chemical solvents, because they may damage
the finish or remove the panel lettering.
9. Handling Notes
• If you need to transport this unit, use the original packaging to
pack it how it was when you originally bought it.
• Do not use volatile liquids, such as insect sprays, near this
unit. Do not leave rubber or plastic items on this unit for a long
time, because they may leave marks on the case.
• This unit’s top and rear panels may get warm after prolonged
use. This is normal.
• When you’ve finished using this unit, remove all discs and
turn off the power.
• If you do not use this unit for a long time, it may not work
properly the next time you turn it on, so be sure to use it occa-
sionally.
10. To Obtain a Clear Picture
This unit is a high-tech, precision device. If the lens on the opti-
cal pickup, or the disc drive mechanism becomes dirty or worn,
the picture quality may be affected. To maintain the best picture
quality, we recommend regular inspection and maintenance
(cleaning or worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact your Onkyo
dealer for details.
11. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
When you take a glass containing a cold drink outside on a sum-
mer’s day, drops of water, called condensation, form on the out-
side of the glass. Similarly, moisture may condense on the lens
of the optical pickup, one of the most important parts inside this
unit.
• Moisture condensation can occur in the following situations:
— The unit is moved from a cold place to a warm place.
— A heater is turned on, or cold air from an air conditioner is
hitting the unit.
— In the summer, when this unit is moved from an air condi-
tioned room to a hot and humid place.
— The unit is used in a humid place.
• Do not use this unit when there’s the possibility of moisture
condensation occurring. Doing so may damage your discs and
certain parts inside this unit.
If condensation does occur, remove all discs and leave this
unit turned on for two to three hours. By this time, the unit will
have warmed up and any condensation will have evaporated.
To reduce the risk of condensation, keep this unit connected to
a wall outlet.
6
Introduction
Make sure you have the following accessories:
Highlights
• Dolby
*1
Digital and DTS
*2
• Holds up to six discs
• Chain mode for successive disc playback
•DVD-Video playback
•Video CD playback
• Audio CD playback
• MP3/WMA
*3
playback
• JPEG picture display and slideshow
• CD-R, CD-RW (Video CD, audio CD, MP3/WMA/JPEG)
•DVD-R, DVD-RW (DVD-Video)
• Direct digital path for signal purity
•Vector Linear Shaping Circuitry
Video
• Advanced 54 MHz/10-bit video D/A converter
• Component video output
•S-Video and composite video outputs
•Title, chapter, track, or time search
•Pause/Still setting for enhanced display of single frames
• Frame-by-frame playback
• Slow motion playback (four speeds)
•Fast forward and reverse (five speeds)
• Last Memory function allows you to resume playback from a
specific point on a DVD-Video disc or Video CD, even if that
disc has been removed from the DV-CP701
• Repeat playback options include: Chapter, Title, 1 Disc, All
Discs, Track, and Folder (MP3/WMA)
• Random playback options include: Title, 1 Disc, All Discs,
and Folder (MP3/WMA)
• Supports 4:3 and 16:9 aspect ratio TVs
• Supports up to 8 soundtracks/languages
• Supports up to 32 subtitle languages
• Multiple camera angle support
•Parental Lock function
• Screen Saver function
Audio
• Audiophile-class performance
• Direct digital path
• 192 kHz/24-bit D/A converter
• Coaxial digital output
• Optical digital output
• Analog output
Others
• Load discs without stopping playback
• Dynamic Range Control setting
• Adjustable display brightness
Supplied Accessories
Remote controller (RC-542DV) & 2 batteries (AA)
AV connecting cable (RCA/phono)
S-Video connecting cable
cable
DV-CP701 Features
*1. Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D logo are trademarks of Dolby Laboratories.
*2. “DTS” is a trademark of Digital Theater Systems, Inc.
*3. Windows Media, and the Windows logo are trademarks,
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
7
Introduction—
Continued
Supported Discs
The DV-CP701 supports the following discs.
• The DV-CP701 does not support disc types not listed.
• The DV-CP701 does not support the following disc types even
if they bear one of the logos shown above: DVD-RAM,
DVD+R, DVD+RW, DVD Audio, Super Audio CD, Photo
CD, CD-G.
• The DV-CP701 supports 8 cm and 12 cm discs.
• Don’t use discs with an unusual shape, such as those shown
below, because you may damage the DV-CP701.
• Don’t use discs that have residue from adhesive tape, rental
discs with peeling labels, or discs with custom-made labels or
stickers. Doing so may damage the DV-CP701 and you may
not be able to remove the disc properly.
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official CD stan-
dards. They are special discs and may not play on the DV-
CP701.
DVD Region Numbers
The North American DV-CP701 supports only Region 1
DVD-Video discs bearing this logo.
The Australian DV-CP701 supports only Region 4
DVD-Video discs bearing this logo.
If you attempt to play a disc intended for another region, the
message “Cannot play discs with this region code” appears
onscreen.
Function Support
The following icons are used throughout this manual to indicate
which functions can be used with the various disc formats and
file types.
Unsupported DVD Features
The DVD standard offers many special features,
including multiple soundtracks, subtitles, camera
angles, and so on. However, not all discs employ all of
these features. When you attempt to use a feature that is not used
by the current disc, for example, you press the remote control-
ler’s [AUDIO] button while playing a disc with only one
soundtrack, this icon will appear onscreen, indicating that the
feature is not supported by the current disc.
Similarly, if a disc uses features that are not supported
by the DV-CP701, for example, special interactive
menu functions, this icon will appear onscreen, indicat-
ing that the feature is not supported by the DV-CP701.
Disc Content Organization
■
DVD-Video Format
DVD-Video discs contain titles, which are usually subdivided
into chapters.
■
Video CD Format
Video CDs contain tracks.
Disc Notes
Disc Logo Format or file type
DVD-Video
*1
*1. The North American model will only play Region 1, NTSC DVD-Video
discs. The Australian model will only play Region 4, PAL DVD-Video
discs, although it can be set to AUTO, in which case it will also play
Region 4 NTSC DVD-Video discs (see page 39).
DVD-R
DVD-Video
DVD-RW
DVD-Video
Video CD
Version 1.1 and 2.0
Audio CD
*2
*2. Some audio CDs feature copy protection that doesn’t conform to the
official CD standard. Since these are nonstandard discs, they may not
play properly in the DV-CP701.
PCM and DTS
CD-R
*3
*3. The DV-CP701 supports CD-R and CD-RW discs recorded in Video CD
format, audio CD format, or ISO9660 Level 2 format with MP3, WMA,
and JPEG files. It also supports DVD-R and DVD-RW discs recorded
in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and
DVD-RW discs may not work properly for any of the following reasons:
incomplete disc finalization, disc burner characteristics, disc character-
istics, the disc is damaged or dirty. See the manual supplied with your
disc burner for more information. Condensation or dirt on the optical
pickup lens can also affect playback.
Video CD, audio CD,
MP3, WMA, JPEG
CD-RW
Video CD, audio CD,
MP3, WMA, JPEG
JPEG CD
JPEG
Icon Disc format or file type
DVD-Video
Video CD
Audio CD
MP3 file
WMA file
JPEG file
1
4
DVD
VCD
CD
MP3
WMA
JPEG
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 2
DVD-Video
Chapter 1
“”
Video CD
Track 1 Track 2 Track 3 Track 4
8
Introduction—
Continued
■
Audio CD Format
Audio CDs contain tracks.
■
MP3/WMA Files
MP3 and WMA files are typically organized into folders. The
DV-CP701 handles MP3 and WMA files as tracks.
■
JPEG Files
JPEG picture files are typically organized into folders. The DV-
CP701 handles JPEG files as tracks.
Video CDs
The DV-CP701 supports Version 1.1 and Version 2.0 of the
Video CD standard. Version 2.0 supports PBC (Playback Con-
trol).
•
Video CD (Version 1.1)
The contents of Video CDs that conform to Version 1.1 of the
Video CD standard are played as tracks.
•
Video CD with PBC (Version 2.0)
In addition to the functions supported by Version 1.1, Version
2.0 offers playback control via interactive menus and search
functions. Note that not all Video CDs use all of the PBC func-
tions supported by the DV-CP701.
MP3/WMA/JPEG Compatibility
• The DV-CP701 can play/display MP3, WMA, and JPEG files
recorded on CD-R and CD-RW discs.
• Discs must be in ISO9660 Level 2 format (folders can be up
to eight levels deep).
• Discs must be finalized.
• The DV-CP701 can only recognize the first session on multi-
session discs.
•You can determine the order in which the DV-CP701 plays/
displays your MP3/WMA songs and JPEG pictures by prefix-
ing file and folder names with a three-digit number. For exam-
ple 001.Root, 002.Folder, and so on, and 001.Track.mp3,
002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the Disc
Navigator.
• The DV-CP701 supports up to 999 folders and up to 672 files
per folder.
• If you try to play an incompatible file, the message “This for-
mat cannot be played” appears on the display.
■ MP3
• MP3 files must be MPEG1 Audio Layer 3 format, 44.1 or
48 kHz, fixed bit-rate.
• MP3 files must have a “.mp3” or “.MP3” filename extension.
•Variable bit-rates (VBR) from 64 kbps to 384 kbps are sup-
ported. (Playing times may display incorrectly with VBR.)
■ WMA
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
•Variable bit-rates (VBR) from 16 kbps to 192 kbps are sup-
ported. (Playing times may display incorrectly with VBR.)
• WMA files must have a “.wma” or “.WMA” or “.ASF” file-
name extension.
■ JPEG
• JPEG files must have a “.jpg” or “.JPG” or “.JPEG” filename
extension.
• Baseline JPEG files are supported. Progressive JPEG files are
not.
• Only JPEG files with the following brightness/color differ-
ence ratios are supported: 4:4:4, 4:2:2, and 4:1:1.
• JPEG files must be less than 5 megabytes in size.
Handling Discs
•Never touch the underside of a disc. Always hold discs by the
edge, as shown.
•Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
•For best results, keep your discs clean. Fingerprints and dust
can affect the sound and picture quality and should be
removed as follows. Using a clean soft cloth, wipe from the
center outwards, as shown. Never wipe in a circular direction.
•To remove stubborn dust or dirt, wipe the disc with a damp
soft cloth, and then dry it with a dry cloth.
•Never use solvent-based cleaning fluids, such as thinner or
benzine, commercially available cleaners, or antistatic sprays
intended for vinyl records, because they may damage the disc.
Audio CD
Track 2 Track 4Track 3Track 1 Track 5
Track 2
Track 3
Track 1
Track 2Track 1
Folder 1 Folder 2
MP3/WMA (CD-R/CD-RW)
Track 2
Track 3
Track 1
Track 2Track 1
Folder 1 Folder 2
JPEG (CD-R/CD-RW)
Underside
✔
9
Introduction—Continued
Storing Discs
• Don’t store discs in places subject to direct sunlight, or near
heat sources.
• Don’t store discs in places subject to moisture or dust, such as
in a bathroom or near a humidifier.
•Always store discs in their cases and vertically. Stacking, or
putting objects on unprotected discs may cause warping,
scratches, or other damage.
Copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, or rent copyrighted material without per-
mission.
DVD-Video discs are copy-protected, and any recordings made
from these discs will be distorted.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright-protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
■ CD-R (compact disc recordable): A type of CD that can
be recorded only once. Can be used to make Video-CDs, audio
CDs, or MP3/WMA/JPEG discs.
■ CD-RW (compact disc rewritable): A type of CD that can
be recorded many times. Can be used to make Video-CDs, audio
CDs, MP3/WMA/JPEG discs.
■ Chapter: Titles on DVD-Video discs can be subdivided into
chapters.
■ Component video: A video connection format that sepa-
rates the luminance (Y) and color difference signals (P
R, PB),
providing better picture quality than S-Video.
■ Composite video: A video connection format that mixes
the luminance and color signals together.
■ Dolby Digital: The multi-channel digital surround sound
format used on most DVD-Videos.
■ Dolby Pro Logic: The four-channel analog surround sound
format that can be encoded in normal stereo soundtracks and
used with VHS video cassettes, analog TV broadcasts, and other
analog stereo systems.
■ Downmixing: The process of mixing multiple audio chan-
nels into fewer channels. For example, a 5.1-channel surround
mix can be downmixed into two channels for reproduction on
stereo systems.
■ Downsampling: The process of reducing the sampling rate
of digital audio.
■ DTS (Digital Theater System): The 5.1-channel surround
format that uses less compression for faithful reproduction.
■ DVD-R (DVD recordable): A type of DVD disc that can be
recorded only once. Can be used to make DVD-Video discs or
to store computer data.
■ DVD-RW (DVD rewritable): A type of DVD disc that can be
recorded many times. Can be used to make DVD-Video discs or
to store computer data.
■ DVD-Video: The format for storing movies on DVD, with
interactive menus, multiple language soundtracks, subtitles,
camera angles, and so on.
■ Field: In interlaced scanning, a field is a single scan of the
screen. There are two fields per frame.
■ Frame: An individual TV picture is called a frame. With the
NTSC color system there are 30 frames per second.
■ Interlaced scanning: TV pictures are made by scanning
the screen in horizontal lines from top to bottom. With Interlaced
scanning, two scans (fields) are used to make each picture
(frame). Contrast with Progressive scanning.
■ JPEG (Joint Photographic Experts Group): The com-
pressed file format used to store digital photos.
■ LFE (low-frequency effects): The surround-sound chan-
nel used for low-frequency effects.
■ Linear PCM: The uncompressed digital audio format used
for audio CDs. PCM stands for Pulse Code modulation.
■ MP3 (MPEG 1 Audio Layer 3): Popular compressed file
format for storing digital music.
■ MPEG1 (Moving Picture Experts Group 1): The com-
pressed digital video format used for Video CDs.
■ MPEG2 (Moving Picture Experts Group 2): The com-
pressed digital video format used for DVD-Videos, offering bet-
ter picture quality than MPEG1.
■ NTSC: The color TV system used in the United States,
Japan, Taiwan, and Korea.
■ PAL: The color TV system used in most of Europe, the
United Kingdom, Australia, Brazil, and China.
■ PBC (Playback Control): Version 2.0 of the Video CD
standard supports interactive menus and search functions.
■ Progressive scanning: TV pictures are made by scanning
the screen in horizontal lines from top to bottom. With progres-
sive scanning, each picture (frame) is made by scanning the
entire screen in one go, resulting is a clearer and stabler picture.
Contrast with Interlaced scanning.
■ S-Video: A video connection format that separates the lumi-
nance (Y) and color (C) signals, providing better picture quality
than composite video.
■ Title: Movies on DVD-Video are called titles.
■ Video CD: The format for storing movies on CD.
■ WMA (Windows Media Audio): A compressed file format
for storing digital music.
DV-CP701-related Terminology
10
Controls & Connectors
For detailed information, refer to the pages in parenthesis.
A STANDBY/ON button (20)
This button is used to set the DV-CP701 to On or
Standby.
Don’t turn on the power until you’ve completed, and
double checked all connections (page 16).
B STANDBY indicator (20)
This indicator lights up when the DV-CP701 is in
Standby mode.
C Disc tray (21)
The disc tray has six bays for loading up to six discs.
D Disc tray light
This light illuminates the disc tray. It comes on when the
DV-CP701 is turned on, and is brighter while the disc
tray is open.
E DISC SKIP button (21, 22)
This button is used to select the disc bays (i.e., rotate the
disc tray) when loading or removing discs, and to select
discs for playback.
F DISC SELECT 1–6 buttons (22)
These buttons are used to select discs. Playback starts
automatically when a disc is selected with these buttons.
G Open/Close [ ] button (21)
This button is used to open and close the disc tray.
H LAST MEMORY button (36)
This button is used with the Last Memory function.
I DIMMER button (29)
This button is used to adjust the display brightness.
J DISPLAY button (37)
This button is used to display information about the cur-
rent disc, title, chapter, or track, including the elapsed
time, remaining time, total time, and so on.
K REPEAT button (31)
This button is used with the Repeat function.
L Display
See “Display” on page 11 for more information.
M Remote control sensor (15)
This sensor receives control signals from the remote
controller.
N Previous [ ] button (25, 28)
This button is used to select the previous chapter or
track. During playback it selects the beginning of the
current chapter or track.
O Next [ ] button (25, 28)
This button is used to select the next chapter or track.
P PAUSE [ ] button (22)
This button is used to pause playback.
Q CHAIN MODE button (30)
This button is used with the Chain mode function.
R STOP [ ] button (22)
This button is used to stop playback.
S PLAY/ENTER [ ] button (22)
This button is used to start playback and to cancel fast
forward and fast reverse. It’s also used to start Chain
mode playback.
Front Panel
A
H
I
J
K
L
M
NO P
Q
RS
BDCEFG
11
Controls & Connectors—Continued
For detailed information, refer to the pages in parenthesis.
1 CHAIN MODE, ALL, DVD & CD indicators (30)
The CHAIN MODE indicator appears when the Chain
mode function is on. The ALL, DVD, and CD indicators
show the type or Chain mode selected.
2 DISC indicator (22)
The number of the currently selected disc appears here.
3 TITLE indicator (22)
While stopped, the total number of titles on the current
DVD-Video disc is displayed here. During playback, the
number of the current title is displayed.
4 CHP indicator
This indicator appears while the number of the current
chapter is being displayed.
5 TRACK indicator
This indicator appears while track numbers are being
displayed. While stopped, the total number of tracks on
the current Video CD, audio CD, or MP3/WMA disc are
displayed. During playback, the number of the current
track is displayed.
6 PRGV indicator (35)
This indicator appears when the Progressive Scanning
function is on.
7 LAST indicator (36)
This indicator appears when the Last Memory function
has been set.
8 TOTAL indicator (37)
This indicator appears while the total time is being dis-
played.
9 REMAIN indicator (37)
This indicator appears while the remaining time is being
displayed.
0 Camera angle indicator (34)
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
A Play indicator (22)
This indicator is shown during playback.
B Pause indicator (10)
This indicator appears when playback is paused.
C Disc indicators 1–6 (21)
These indicators show how many discs are loaded. The
number of the current disc has a circle around it.
When the disc tray is closed, all of the disc indicators
appear until the DV-CP701 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
D Chapter & track number
Chapter and track numbers appears here.
E Time display
Time information, such as total time, remaining time,
and so on, is displayed here in hours, minutes, and sec-
onds. Other messages are also displayed.
F VCDVD indicator
This indicator shows the type of disc currently selected:
DVD: DVD-Video, DVD-R, or DVD-RW
VCD: Video CD
CD: Audio CD, MP3/WMA/JPEG CD-R, or CD-RW
Display
CD
DVD
ALL
CHAIN MODE DISC TITLE CHP
TRACK PRGV LAST
TOTAL REMAIN
1 2 3
4 5 6
VCDVD
13
DEF
45 67 8 90AB C2
12
Controls & Connectors—Continued
For detailed information, refer to the pages in parenthesis.
A COMPONENT VIDEO OUTPUT (17)
These RCA/phono connectors can be used to connect a
TV or projector with component video inputs.
B S VIDEO OUTPUT (17)
This connector can be used to connect a TV or projector
with an S-Video input.
C VIDEO OUTPUT (17)
This RCA/phono connector can be used to connect a TV
or projector with a composite video input.
D OPTICAL AUDIO OUTPUT (18)
This optical digital audio output can be connected to an
optical digital audio input on a hi-fi amp, AV receiver, or
surround sound decoder (Dolby Digital, DTS).
E COAXIAL AUDIO OUTPUT (18)
This coaxial digital audio output can be connected to an
coaxial digital audio input on a hi-fi amp, AV receiver, or
surround sound decoder (Dolby Digital, DTS).
F Power cord (20)
This power cord should be connected to a suitable wall
outlet.
G ANALOG AUDIO OUTPUT (17, 18)
These RCA/phono connectors can be connected to ana-
log audio inputs on a hi-fi amp, AV receiver, or surround
sound decoder (Dolby Pro Logic).
H REMOTE CONTROL (19)
These (Remote Interactive) connectors can be con-
nected to the connectors on your other Onkyo AV
components for interactive control.
Rear Panel
DVD CHANGER
MODEL NO. DV
-
CP
701
COMPONENT
PB
PR
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
78
12354
6
13
Controls & Connectors—Continued
For detailed information, refer to the pages in parenthesis.
A STANDBY button (20)
This button is used to set the DV-CP701 to Standby.
B ON button (20)
This button is used to turn on the DV-CP701.
Don’t turn on the DV-CP701 until you’ve completed,
and double checked all connections (page 16).
C SEARCH button (25, 28, 31)
This button is used to search for titles, chapters, tracks,
and specific points in time.
D LAST M button (36)
This button is used with the Last Memory function.
E Number buttons (25, 28, 31)
These buttons are used to enter title, chapter, and track
numbers and to enter times for locating specific points in
time.
To enter a single-digit number, simply press the corre-
sponding button. To enter a double-digit number, enter
the numbers in order from left-to-right (e.g., to enter 14,
press [1] then [4].
The [+10] button is used to enter multiples of ten (i.e.,
10, 20, 30, and so on). For example, to enter the number
25, press the [+10] button twice followed by the [5] but-
ton.
F TOP MENU button (24)
This button is used to select the top menu.
G RETURN button (39)
This button is used to exit the onscreen setup menu and
to restart menu playback.
H AUDIO button (35)
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital or
DTS).
I ANGLE button (34)
This button is used to select different camera angles.
J Fast Forward [ ] button (28)
This button is used to start fast forward.
K Fast Reverse [ ] button (28)
This button is used to start fast reverse.
L DISC 1–6 buttons (22)
These buttons are used to select discs. Playback starts
automatically when a disc is selected with these buttons.
M DISC SKIP button (21, 22)
This button is used to select the disc bays (i.e., rotate the
disc tray) when loading or removing discs, and to select
discs for playback.
N MEMORY button (33)
This button is used with the Memory Playback function.
O OPEN/CLOSE [ ] button (21)
This button is used to open and close the disc tray.
P CHAIN MODE button (30)
This button is used with the Chain mode function.
Remote Controller
ON STANDBY
SEARCH
LAST M
MEMORY
CHAIN MODE
REPEAT
A
-
B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC SKIP
DIMMER
RC-542DV
STEP/SLOW
CLEAR
OPEN/
CLOSE
PROGRESSIVE
ENTER
+
10
0
123
456
789
1
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
g
h
2
3
5
6
7
M
L
8
9
J
K
4
c
14
Controls & Connectors—Continued
Q REPEAT button (31)
This button is used to set the Repeat Playback functions.
R A–B button (32)
This button is used to set the A–B Repeat Playback func-
tion.
S RANDOM button (32)
This button is used with the Random Playback function.
T DISPLAY button (37)
This button is used to display information about the cur-
rent disc, title, chapter, or track, including the elapsed
time, remaining time, total time, and so on.
U CLEAR button
This button is used to cancel various functions.
V MENU button (24)
This button is used to select the menu.
W ENTER button
This button is used to start playback of the selected title
chapter, or track and to confirm settings.
X [], [], [], [] buttons
These buttons are used to navigate DVD-Video menus
and the onscreen setup menus.
Y SETUP button (39)
This button is used to open and close the onscreen setup
menus.
Z SUBTITLE button (35)
This button is used to select subtitles.
a Play [ ] button (22)
This button is used to start playback.
b Pause [ ] button (22)
This button is used to pause playback.
c Stop [ ] button (22)
This button is used to stop playback.
d Previous [ ] button (25, 28)
This button is used to select the previous chapter or
track. During playback it selects the beginning of the
current chapter or track.
e Next [ ] button (25, 28)
This button is used to select the next chapter or track.
f STEP/SLOW [+] & [–] buttons (29)
These buttons are used with the Frame-by-Frame Play-
back and Slow Motion Playback functions.
g DIMMER button (29)
This button is used to adjust the display brightness.
h PROGRESSIVE button (35)
This button is used to turn on and off the Progressive
Scanning function. Progressive scanning can’t be turned
on or off during playback.
15
Before Using the DV-CP701
Notes:
• The supplied batteries should last for about six months,
although this will vary with usage.
• If the remote controller doesn’t work reliably, try replacing
both batteries.
• Don’t mix new and old batteries, or different types of bat-
teries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage and
corrosion.
• Flat batteries should be removed as soon as possible to pre-
vent possible leakage and corrosion.
To use the remote controller, point it at the DV-CP701’s
remote control sensor, as shown below.
Notes:
• The remote controller may not work reliably if the DV-
CP701 is subjected to bright light, such as direct sunlight
or inverter-type fluorescent lights. Keep this in mind when
installing the DV-CP701.
• If another remote controller of the same type is used in the
same room, or the DV-CP701 is installed close to equip-
ment that uses infrared rays, the remote controller may not
work reliably.
• Don’t put anything, such as a book, on the remote control-
ler, because the buttons may be pressed inadvertently,
thereby draining the batteries.
• The remote controller may not work reliably if the DV-
CP701 is installed in a rack behind colored glass doors.
Keep this in mind when installing the DV-CP701.
• The remote controller will not work if there’s an obstacle
between it and the DV-CP701’s remote control sensor.
Installing the Remote Controller’s
Batteries
1
Open the battery compartment, as shown.
2
Insert the two supplied batteries (AA) in
accordance with the polarity diagram inside
the battery compartment.
3
Close the battery compartment.
Using the Remote Controller
30˚
30˚
DV-CP701
Remote control sensor
Approx. 16 ft. (5 m)
16
Connecting the DV-CP701
This chapter explains how to connect the DV-CP701 to your
other AV components.
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed all
audio and video connections.
Optical Digital Inputs
The DV-CP701’s optical digital connector
has a dust cap for keeping out dust and dirt
when it’s not in use. Remove the cap before
inserting an optical digital plug. Push the
plug in all the way to make a good connec-
tion. Keep the dust cap in a safe place for
future use.
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded: red,
white, and yellow. Use red plugs to connect right-channel
audio inputs and outputs (typically labeled “R”). Use white
plugs to connect left-channel audio inputs and outputs (typi-
cally labeled “L”). And use yellow plugs to connect compos-
ite video inputs and outputs.
• Push the plugs in all the way to make
a good connection.
•To prevent interference, keep audio
and video cables away from power
cords and speaker cables.
Before Making Any Connections
Analog audio
Right (red)
Left (white)
(Yellow)
Right (red)
Left (white)
(Yellow)
Composite video
Wrong!
Right!
AV Cables & Connectors
Video
Component
video
Component video separates the luminance (Y) and color
difference signals (PR, PB), providing the best picture
quality. (Some TV manufacturers label their component
video inputs slightly differently.)
S-Video
S-Video provides better picture quality than composite
video.
Composite
video
Composite video can be found on virtually all TVs,
VCRs, and other video equipment. Use only dedicated
composite video cables.
Audio
Optical digital
Optical digital audio connections with the optical digital
audio output and a suitable AV receiver, you can enjoy
DVD-Videos with surround sound.
Coaxial digital
Coaxial digital audio connections with the coaxial digi-
tal audio output and a suitable AV receiver, you can
enjoy DVD-Videos with surround sound.
Analog
RCA/phono analog audio connectors can be found on
virtually all AV components.
C
R
C
B
Y
C
R
C
B
P
R
P
B
P/ /
//
R
P
B
Y
YPB PR
S VIDEO
VIDEO
OPTICAL
COAXIAL
LR
AUDIO
17
Connecting the DV-CP701—Continued
This section explains how to connect the DV-CP701 to your
TV or projector.
In this hookup example, the TV handles the audio and video.
If your TV has a Dolby Pro Logic decoder built-in, you’ll be
able to enjoy DVDs and videos that bear the Dolby Surround
logo.
To enjoy Dolby Digital or DTS (5.1-channel surround),
you’ll need a compatible decoder (see page 18).
The DV-CP701 has three types of video output: component
video, S-Video, and composite video. Component video
offers the best picture quality, so if your TV supports it, use
a commercially available component video cable to connect
the DV-CP701’s COMPONENT video output to the compo-
nent video inputs on your TV. If your TV supports progres-
sive scanning, you must use component video in order to take
advantage of that feature.
S-Video offers better picture quality than composite video,
so if your TV supports it, use the supplied S-Video cable to
connect the DV-CP701’s S VIDEO output to an S-Video
input on your TV. Failing that, use the supplied composite
video cable to connect the DV-CP701’s VIDEO output to a
composite video input on your TV.
Notes
• Before making any connections, turn off the DV-CP701
and your TV and disconnect their power cords from the
wall outlets.
• Also refer to the connection information supplied with
your TV.
• Connect the DV-CP701’s video outputs directly to your
TV. Don’t connect a VCR or other video equipment in
between your DV-CP701 and TV. Doing so may result in
picture distortion, because of the copy protection system
used on DVD-Video discs.
• When you use the analog audio outputs, don’t play DTS
CDs or don’t select DTS soundtracks on DVD-Video discs.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
Connecting Your TV or Projector
1
Turn off the DV-CP701 and your TV, and dis-
connect their power cords from the wall out-
lets.
2
Connect the DV-CP701 to your TV as shown.
3
When you’ve completed all connections, see
“Powering Up & Setting Up the DV-CP701”
on page 20.
DVD CHANGER
MODEL NO. DV
-
CP
701
COMPONENT
P
B
P
R
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
L
R
ANALOG
INPUT
S VIDEO IN
Y
IN
PB
PR
VIDEO IN
Only one connection required!
Choose component video,
S-Video, or composite video.
S-Video cable
(supplied)
AV RCA/phono
cable (supplied)
(yellow)
(yellow)
(white)
(white)
(red)
Component video
cable
TV or projector
(red)
18
Connecting the DV-CP701—Continued
This section explains how to connect the DV-CP701 to a ste-
reo hi-fi amp or receiver for better sound quality than that of
most TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP701. DVD-Video discs and Video
CDs will sound better too. You can also enjoy Dolby Pro
Logic, so long as your receiver supports it.
Analog Connection
Use an RCA/phono audio cable to connect the DV-CP701’s
ANALOG AUDIO OUTPUTs to a pair of analog audio
inputs on your hi-fi amp or receiver, as shown.
Notes:
• When you use the analog audio outputs, don’t play DTS
CDs or don’t select DTS soundtracks on DVD-Video discs.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
Digital Connection
Use an optical (or coaxial) digital audio cable to connect the
DV-CP701’s OPTICAL (or COAXIAL) DIGITAL AUDIO
OUTPUT to an optical (or coaxial) input on your hi-fi amp or
receiver, as shown.
Notes:
• Be sure to set the Digital Out–>Dolby Digital setting to
“Dolby Digital>PCM” (see page 41). Otherwise an
unpleasant digital noise may be heard, which may damage
your equipment.
•Never connect the DV-CP701 to the AC-3RF input on a
Dolby Digital receiver. The AC-3RF format is not sup-
ported by the DV-CP701.
To enjoy Dolby Digital or DTS surround sound, you need to
connect one of the DV-CP701 digital audio outputs to the
digital input on a Dolby Digital or DTS decoder or an AV
receiver with built-in decoders.
This hookup example will also allow you to enjoy Dolby Pro
Logic, so long as your decoder or AV receiver supports it.
Notes:
• Make sure that the Digital Out–>Dolby Digital setting to
“Dolby Digital” (see page 41). Otherwise you won’t get
surround sound.
• Also refer to the connection information supplied with
your AV receiver or decoder.
• When playing Dolby Digital or DTS source material, be
sure to select Dolby Digital or DTS decoding, respectively,
on your AV receiver or decoder. See the relevant manuals.
•You can experience Dolby Digital only with DVDs that
bear the Dolby Digital logo. Likewise, you can experience
DTS only with DVDs or CDs that bear the DTS logo.
Connecting Your Hi-Fi Amp
COMPONENT
P
B
P
R
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
L
R
ANALOG
AUDIO
OUTPUT
L
R
ANALOG
INPUT
RCA/phono cable
(white)
(white)
(red)
(red)
Signal flow
COMPONENT
P
B
P
R
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
DVD CHANGER
MODEL NO. DV
-
CP
701
COAXIAL
OPTICAL
Connect one or the other
Signal flow
OPTICAL COAXIAL
Connecting for Dolby Digital or DTS
Signal flow
AV component with
Dolby Digital/DTS decoder
COMPONENT
P
B
P
R
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
DVD CHANGER
MODEL NO. DV
-
CP
701
COAXIAL
Connect one or the other
OPTICAL
COAXIAL
OPTICAL
1
19
Connecting -compatible AV Components
With (Remote Interactive) you can control your DV-
CP701 and other -compatible Onkyo AV components
together. With some Onkyo AV receivers you can use one
remote controller to control all your Onkyo components, and
use the following special functions:
■ Auto Power On
If your DV-CP701 is connected to an -compatible Onkyo
AV receiver, when you turn on the DV-CP701, the AV
receiver will turn on and select the DV-CP701 as the input
source.
■ Auto Source Select
If your DV-CP701 is connected to an -compatible Onkyo
AV receiver, when you start playback on the DV-CP701, the
AV receiver will select the DV-CP701 as the input source.
■ Auto Power Off
When you set any -compatible Onkyo AV receiver to
Standby, all other AV components connected via enter
Standby as well.
■ Dimmer
When you dim the display brightness on an -compatible
Onkyo AV component, the displays on all other AV compo-
nents connected via are dimmed as well.
See the manuals supplied with your other -compatible AV
components for more information.
To use the functions, you need to connect one of the DV-CP701’s connectors to an connector on another AV
component by using an cable. An cable is supplied with all -compatible Onkyo CD players, DVD players, and
cassette recorders.
Notes:
• Push the plugs in all the way to make a good connection.
• Use only cables for connections.
• To use you must also make an analog RCA/phono
connection between your DV-CP701 and Onkyo AV
receiver, even if they are connected digitally.
• The DV-CP701 has two connectors. You can connect
either one to your Onkyo AV receiver. The other connector
is for connecting additional -compatible components.
• Connect the DV-CP701’s connector to only Onkyo AV
components. Connecting to other manufacturer’s AV com-
ponents may cause them to malfunction.
• Some Onkyo -compatible AV components may not
support the special functions described above.
Connection Diagram
Onkyo AV receiver
cable
(Supplied)
To use you must
also make an analog
RCA/phono connection
between your DV-CP701
and Onkyo AV receiver,
even if they are
connected digitally.
Connecting several -compatible
Onkyo AV components
REMOTE
CONTROL
connector
Onkyo AV receiver
DV-CP701 DVD Changer
Onkyo cassette
recorder
DVD CHANGER
MODEL NO. DV
-
CP
701
COMPONENT
P
B
P
R
Y
L
R
REMOTE
CONTROL
VIDEO
OUTPUT
VIDEO
S
VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
Disconnect the power
cord before making
any connections!
connector
REMOTE
CONTROL
L
R
ANALOG
INPUT
DIGITAL
INPUT
OPTICAL
20
Powering Up & Setting Up the DV-CP701
Before connecting the power cord, connect all your AV com-
ponents (see page 16 to page 19).
Don’t forget to turn on your TV or projector and select the
video input to which the DV-CP701 is connected.
If you’re using a hi-fi amp, AV receiver, or surround sound
decoder for audio playback, turn that on as well and select the
audio input to which the DV-CP701 is connected.
The very first time you turn on your DV-CP701, the Initial
Setup menu appears onscreen, as shown.
Here you need to specify the size of your TV (standard 4:3 or
widescreen 16:9), select a language for the onscreen setup
menus, and configure the digital audio output. You can
change these settings later by using the onscreen setup menus
(see page 38).
Your DV-CP701 is now ready for use. See page 21 for infor-
mation on loading discs, and page 22 for information on
selecting and playing discs.
Notes:
•You can change the language of the onscreen setup menus,
and your preferred languages for DVD menus, foreign lan-
guage soundtracks, and subtitles individually on the Lan-
guage page of the onscreen setup menus (see page 41).
• Not all DVD-Video discs have multi-language menus, for-
eign language soundtracks, and subtitles. In such cases, the
disc’s default language is used.
Powering Up the DV-CP701
1
Connect the power cord to a suit-
able wall outlet.
The DV-CP701 enters Standby mode, and
the STANDBY indicator comes on.
2
To turn on the DV-CP701, press the
[STANDBY/ON] button (or the
remote controller’s [ON] button).
The DV-CP701 comes on, the display
lights up, and the STANDBY indicator
goes off.
To turn off the DV-CP701, press the
[STANDBY/ON] button (or the remote
controller’s [STANDBY] button). The
DV-CP701 enters Standby mode and the
STANDBY indicator comes on.
First Time Setup
ON STANDBY
SEARCH
LAST M
MEMORY
CHAIN MODE
REPEAT
A
-
B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE
CLEAR
OPEN/
CLOSE
ENTER
+
10
0
123
456
789
STANDBY indicator
STANDBYSTANDBY/ON
ON
ENTER
ON STANDBY
Remote controller
Sets aspect ratio of connected TV.
Initial Setup
TV Shape
Digital Out
On-Screen Language
4:3 Letter box
4:3 Normal
16:9 Widescreen
16:9 Compressed
ENTER
Selection
1
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select a TV
shape, and then press [ENTER].
See page 39 for more information on the
TV Shape options.
The On-Screen Language menu appears.
2
Select a language, and then press
[ENTER].
See page 41 for more information on the
language options.
The Digital Out–>Dolby Digital menu
appears.
3
Select a Dolby Digital option, and
then press [ENTER].
See page 41 for more information on the
digital audio output options.
The Digital Out–>Linear PCM Out menu
appears.
4
Select a Linear PCM Out option,
and then press [ENTER].
The Digital Out–>MPEG Out menu
appears.
5
Select an MPEG Out option, and
then press [ENTER].
The Digital Out–>Digital Out menu
appears.
6
Select a Digital Out option, and
then press [ENTER].
The Initial Setup menu closes.
ENTER
Remote controller
ENTER
Remote controller
ENTER
Remote controller
ENTER
Remote controller
ENTER
Remote controller
ENTER
Remote controller
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
