Roland PR-1000HD Owner's manual

Brand: Roland

Model: PR-1000HD

Type: Owner's manual

PR-1000HD Version 1.1 Main Features

■

Support for DV Format

Support has been added for capturing from DV devices and importing and playing DV stream ﬁles

(.dv).

Multi-format playback is supported in addition to the already supported HDV playback.

* When capturing DV materials, they are automatically converted to intra frame Compression (Intra Frame

Only) MPEG2.

■

Support for Importing Still Images

Support added for importing and playing JPEG and BMP ﬁles. The imported still image is output by

setting the playback duration. Multi-format playback is supported in addition to the already

supported HDV and with newly supported DV playback.

* When still images are imported, they are converted to YUV 4:2:0, 1920 x 1440 (4:3) pixels.

■

Support for Importing Uncompressed AVI Files

Uncompressed AVI ﬁles (.avi) generated by a PC can be loaded.

* AVI materials imported from a PC are automatically converted to intra frame Compression (Intra Frame

Only) MPEG2.

■

Support for Intra Frame Only MPEG2 Playback

Support added for intra frame compression (Intra Frame Only) MPEG2 Playback as an internal format.

Because Intra Frame Only MPEG2 can be played frame by frame, playback control is more accurate

than other inter frame compression materials, such as HDV.

The PR-1000HD converts HDV materials to Intra Frame Only MPEG2. Newly captured HDV material is

converted to Intra Frame Only MPEG2 while being captured, and HDV material that is already

captured can be converted to Intra Frame Only MPEG2.

* When importing DV or AVI materials, they are automatically converted to Intra Frame Only MPEG2.

■

Changes in the User Interface

Because of the changes mentioned above, the display contents for Play Mode and Edit Mode have

changed.

Version 1.1 Main Feature

Specifications for Intra Frame Only MPEG2 converted from HD materials

1080i

1440 x 1080 YUV420 MPEG2 Intra Frame Only 50 Mbps

720p

1280 x 720 YUV420 MPEG2 Intra Frame Only 50 Mbps

Specifications for Intra Frame Only MPEG2 converted from SD materials

480i or 576i (NTSC or PAL)

720 x 480 or 720 x 576 YUV420 MPEG2 Intra Frame Only 25 Mbps

When materials are imported as

Intra Frame Only MPEG2, an

amount of storage space

equivalent to about twice or

triple the size of the original

HDV/DV material is required. You

should always check to make

sure that you have enough free

space remaining on the

removable hard disk drive.

To restore a removable hard disk

that has been converted for

version 1.1 to a previous version,

it must be initialized with the

version 1.1 utility. Perform

initialization by selecting the

“Initialize to older version”

option from “Initialize.”

However, please be aware that

data saved on the removable

hard disk drive will be lost in

this case.

Removable hard disk drive compatibility with previous versions

PR-1000HD version 1.1 is designed with many significant function enhancements as well as

significant improvements for project management. For this reason, the removable hard disk drive

to be used must be converted for version 1.1.

* Data stored on the HDD-250 will not be lost due to the conversion.

To convert the removable hard disk drive for version 1.1, insert the removable hard disk drive into

the version 1.1 PR-1000HD and start it up. After startup, follow the displayed messages to convert

the removable hard disk drive. (The message does not display for removable hard disk drives that

have already been converted.)

* Removable hard disk drives that have been converted for version 1.1 are not recognized on older

PR-1000HD versions. Please update your PR-1000HD to version 1.1.

PR-1000HD_v11_e.book 1 ページ２００９年１０月２７日　火曜日　午前１１時２分

PR-1000HD Version 1.1 Main Features

❏

Output Resolution

The following shows the output resolutions that can be used.

*1: 1080/59.94p or 50p can be output in DVI-D only.

❏

De-interlace Setting

When de-interlace setting is set to off and 1080/59.94i or 50i material is played, either interlace

playback or progressive playback is used depending on the output resolution selection. For 1080/

59.94i or 50i output, interlace playback is used. For 1080/59.94p or 50p and 720/59.94p or 50p output,

it is converted to progressive. For other output resolutions, playback is with 29.94p or 25p without

canceling interlace.

When de-interlace setting is on, playback blends even-numbered and odd-numbered ﬁelds using

29.94p or 25p.

* When de-interlace setting is off with 1080i, 1080p, or 720p, you cannot confirm how effects, such as fade or

color adjustment, are applied on the “Video Output Monitor” on the operation screen. However, the final

output from the main unit will reflect the effects.

❏

Blurring of Paused Video when De-interlace is off

When using interlace during playback or when converting interlace materials to progressive, blurring

can be observed when playback is paused. You can display without blurring by displaying only one

ﬁeld. A menu selection to achieve this is displayed on the “Video Output Monitor” by right-clicking.

❏

Display while fade is applied

When fade is applied during playback in Play Mode, the periphery of the “Video Output Monitor” is lit

red while the effect is being applied.

❏

Setting In-points and Out-points for the HDV clip

Because HDV materials are inter frame compression materials, the ﬁrst several frames and the last few

frames may not play properly. When loading materials, please capture not only the required scene,

but extra material on either side. To play back only the required scene, be sure to properly set the in-

point and out-point on the PR-1000HD.

❏

Playing the ﬁrst and last portions of HDV materials

Because HDV materials are inter frame compression materials, the ﬁrst two frames and the last

number of frames may not play properly. For this reason, the start frame for the material shown in Edit

Mode is displayed as 00:00:00:02, and the end frame occurs before the actual end of the loaded

material.

❏

Playback speed operations during playback

If the playback speed slider is used during playback of video in Play Mode, the video may appear

distorted. The same also applies to changing the playback speed during playback using remote

control via MIDI or RS-232C.

❏

When Copying Materials over a Network

When copying material to this unit over a network, please be sure to conﬁrm there is enough free

space on the removable hard disk drive. This is because when loading materials over a network, the

original ﬁle is ﬁrst copied to the drive, and then a data ﬁle that can be used on this unit is generated. In

particular, when converting materials to Intra Frame Only materials, in addition to the space required

for copying the original material, twice as much free space is required.

❏

Other cautions

Materials of less than one second cannot be loaded.

Please do not capture from video tapes that have several formats mixed together; capture will not

perform properly on such tapes.

The drop frame of the video output might happen because of the audio and video synchronization.

Additional Information

1080/59.94p or 50p *1 720/59.94p or 50p

1080/59.94i or 50i 1080/29.97p or 25p

1920 x 1200/60Hz or 75Hz 1280 x 960/60Hz or 75Hz 640 x 480/60Hz or 75Hz

1280 x 1024/60Hz or 75Hz 1024 x 768/60Hz or 75Hz

Caution

Supported frame rates differ

according to regional

specifications.

• Please refer to “Setting the Clip

Playback Segment” in the

Owner’s Manual (p. 68)

regarding setting in-points and

out-points.

• The remaining capacity of the

removable hard disk drive can

be checked in the “Drives” list

in the dialog for “Import

Material.”

• Please refer to “Making the

Network Settings” in the

Owner’s Manual (p. 100)

regarding network settings.

PR-1000HD_v11_e.book 2 ページ２００９年１０月２７日　火曜日　午前１１時２分

Changes in the User Interface

■

Clip

Clip video and still image information are displayed as icons.

In addition, the display position of the information has been changed.

The clip ﬁle format.

Length from the IN point to the OUT point of the clip.

The key of the keyboard that will playback the clip.

The clip name.

The length of the dissolve time set in each clip (in seconds).

The loop mode settings that are set in each clip.

This is displayed by clicking on the [Edit Mode] button on the upper-right of the Play Mode screen.

■

Clip Information

Detailed information about the clip is now displayed.

The clip ﬁle format.

The clip size.

Length from the IN point to the OUT point of the clip.

Still image clip length settings.

Play Mode

Edit Mode

Display of the 3. Keyboard Label

can be turned On/Off with Caps

Lock On/Off. When Off, playback

using the number or symbol keys

is disabled. This can be used to

prevent operational mistakes.

Clips of less than 15 frames

cannot be created.

2 3

PR-1000HD_v11_e.book 3 ページ２００９年１０月２７日　火曜日　午前１１時２分

Changes regarding HDV or DV capture

Select the format of the input video.

Select from 1080i, 720p, or DV.

Connect the PR-1000HD to the target device using a DV cable.

Set the options.

The following settings can be made when capturing.

“Convert to I-frame only MPEG2”:

Converts to Intra Frame Only MPEG2. Playback control by frame can be performed accurately.

When capturing DV materials, they are always converted to Intra Frame Only MPEG2.

Playback the HDV/DV stream from the device or non-linear software.

When capturing from an HDV/DV device or PC non-linear software

Video formats that can be captured into the PR-1000HD

HDV

MP@H-14

1080/59.94i or 50i: 25 Mbps CBR

720/29.97p or 25p: 19 Mbps CBR

Audio: 48 kHz 16 bit 328 kbps Stereo MPEG-1 - Layer 2

DV NTSC or PAL

Audio: 16 bit 48 kHz PCM Stereo

• HDV (720/59.94p or 50p) is not

supported.

• When playing a tape on a video

deck, be sure to play tapes that

were recorded on that video

deck. Since individual decks are

designed differently, tapes

recorded on one video device

may not play properly on

another, and drop-outs and

block noise may result.

• HDV/DV streams of less than 1

second cannot be captured.

• When “Convert to I-frame only

MPEG2” is set and HD materials

are captured, an amount of

storage space equivalent to

about triple the size of the HDV

material is temporarily

required.

When DV materials are

captured, an amount of

storage space equivalent to

about twice the size of the DV

material is temporarily

required.

You should always check to

make sure that you have

enough free space remaining

on the removable hard disk

drive.

• Tapes recorded with multiple,

mixed formats cannot be

captured. For example, capture

cannot be performed when a

single tape has HDV (1080i),

HDV (720p), and DV recorded

on it.

• When the PR-1000HD does not

recognize the stream, please

click “Input Select” button.

Supported frame rates differ

according to regional

specifications.

PR-1000HD_v11_e.book 4 ページ２００９年１０月２７日　火曜日　午前１１時２分

Changes regarding importing material data

HDV, DV, and still images created on a PC can be imported into a project.

Version 1.1 allows data in the following formats to be imported.

* Material cannot be played directly from a USB external hard drive.

* IEEE 1394 external hard drives cannot be used.

Media that can be used with PR-1000HD

Media Formats

CD-ROM/CD-R/CD-RW ISO9660 Level 2 or Microsoft Joliet Mode 1 format (other OS extended

formats are not supported)

DVD-ROM

DVD-R/DVD+R

DVD-RW/DVD+RW

DVD-RAM

UDF

Memory Card/USB external drive format

USB Memory Card Reader FAT12, FAT16, FAT32, NTFS formats

USB 2.0 mass storage class devices

USB memory

USB external hard drive

File formats that can be imported into the PR-1000HD

HDV

File Format MPEG2-TS (.m2t)

Data Format (CODEC) MP@ML

1080/59.94i or 50i: 25 Mbps CBR

720/29.97p or 25p: 19 Mbps CBR

Audio: 48 kHz 16 bit 328 kbps Stereo MPEG-1 - Layer 2

AVI

File Format AVI/OpenDML 2.0 (.avi)

Data Format (CODEC) Uncompressed 24 bit RGB

1440 x 1080 / 59.94i or 50i, 720 x 480/59.94i or 720 x 576/50i

Audio: 16 bit 48 kHz PCM Stereo

File Format DV Stream File (.dv)

Data Format (CODEC) DV NTSC or PAL

Audio: 16 bit 48 kHz PCM Stereo

Still Images

File Format JPEG

BMP

Data Format (CODEC) JPEG (RGB 24 bit) Maximum 4,000 x 3,000

BMP (RGB 24 bit) 4:3 Aspect Ratio

• For details, please refer to other

sources, including the

instruction manuals that came

with your PC and your video

editing software.

• Supported frame rates differ

according to regional

specifications.

PR-1000HD_v11_e.book 5 ページ２００９年１０月２７日　火曜日　午前１１時２分

Changes regarding importing material data

Still images, AVI ﬁles, and HDV/DV stream ﬁles can now be loaded.

When importing HDV materials, option settings can now be carried out.

“Convert to I-frame only MPEG2”:

Converts from HDV inter frame Compression to Intra Frame Only MPEG2. Playback control by frame

can be performed accurately. When loading DV or AVI material, they are always converted to Intra

Frame Only MPEG2.

HDV materials (inter frame compression) in projects can also be converted to Intra Frame Only

materials.

Changes in the Import window

When the drive is not displayed,

click on the [Rescuing] button in

the dialog box.

When HD materials are loaded as

Intra Frame Only MPEG2, an

amount of storage space

equivalent to about twice the

size of the HDV material is

required. You should always

check to make sure that you

have enough free space

remaining on the removable

hard disk drive.

When importing still images,

they are resized to 1920 x 1440

pixels (4:3).

PR-1000HD_v11_e.book 6 ページ２００９年１０月２７日　火曜日　午前１１時２分

Still Image Settings

Still images can be dragged and dropped into the “Clip” list in Edit Mode and used the same as video.

After clipping still images, the playback time can be set and they are treated the same as video

images.

The still image playback duration can be set.

The following conditions must be met in order to display still images dot-by-dot (one pixel of the still

image corresponds to one dot in the output device).

•

The size of the loaded still image must be 1920 x 1440 pixels

•

The system environment setting “Video Output Resolution” must be 1920 x 1080

•

The Edit Mode screen “Scaler” must be set to “Crop”.

When the above settings are made, the following halftone mesh portion is displayed in the loaded

still image.

Setting the playback duration

Output still image dot-by-dot

The default value for the length

of the still image clip is 10

seconds.

Clips of less than 15 frames

cannot be created.

1920

1080

1440

180 180

PR-1000HD_v11_e.book 7 ページ２００９年１０月２７日　火曜日　午前１１時２分

You can select Black Level setting on system version 1.14 or later. Select from [ R,G,B = 0,0,0 ] or [ R,G,B

= 16,16,16 ] under [ Black Level ] of System Preferences screen.

•

The black level setting on the versions earlier than 1.14 was ﬁxed to [ R,G,B = 16,16,16 ].

About the GPL/LGPL software used in this product

Thank you for purchasing our product.

This product is using the GNU General Public License (GPL) / GNU Lesser General Public License (LGPL) software. You have

the right to acquire, modify and distribute the source code for this GPL/LGPL software.

You can obtain the GPL/LGPL source code used in this product by downloading it from the following website:

http://www.roland.com/support/gpl/

*5100002989-03*

PR-1000HD_v11_e.book 8 ページ２００９年１０月２７日　火曜日　午前１１時２分

Roland PR-1000HD Owner's manual

Roland PR-1000HD Owner's manual

Roland PR-1000HD Owner's manual

Related papers

Other documents