2. Ikelite
  3. Trigger Extension for Shutter or Back Button Focus

Ikelite Trigger Extension for Shutter or Back Button Focus User manual

  • Hello! I am an AI chatbot trained to assist you with the Ikelite Trigger Extension for Shutter or Back Button Focus User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Extends Shutter Trigger from housing for better ergonomics when using dual
handles.
1/16” Hex Head Wrench
Trigger Extension
Included in Kit
Shutter Trigger Extension
Product Number 4077.93
Extends Shutter Trigger from housing for better ergonomics when using dual
handles.
1/16” Hex Head Wrench
Trigger Extension
Included in Kit
Shutter Trigger Extension
Product Number 4077.93
Extends Shutter Trigger from housing for better ergonomics when using dual
handles.
1/16” Hex Head Wrench
Trigger Extension
Included in Kit
Shutter Trigger Extension
Product Number 4077.93
Extends Shutter Trigger from housing for better ergonomics when using dual
handles.
1/16” Hex Head Wrench
Trigger Extension
Included in Kit
Shutter Trigger Extension
Product Number 4077.93
1. Remove Shutter Trigger using 1/16” Hex Head Wrench.
2. Check Set Screw tightness of Shutter Trigger Base. DO NOT
overtighten.
3. Slide Extension over Shutter Trigger Base. Tighten onto round depression
as shown. DO NOT overtighten.
4. Slide Shutter Trigger over Trigger Extension. Tighten onto round depression
as shown. DO NOT overtighten.
5. Due to the protrusion of the Trigger Extension + Shutter Trigger, care should
be taken when traveling. If the Trigger Extension + Shutter Trigger cannot
be adequately protected, it is recommended that the Trigger Extension +
Shutter Trigger should be removed and reinstalled once you reach your
destination.
Installation
4077.93_Shutter_Trigger_Extension_2-1116
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
[email protected]
© 2016 Ikelite Underwater Systems
Trigger
Extension
Shutter
Trigger
Shutter
Trigger
Base
1. Remove Shutter Trigger using 1/16” Hex Head Wrench.
2. Check Set Screw tightness of Shutter Trigger Base. DO NOT
overtighten.
3. Slide Extension over Shutter Trigger Base. Tighten onto round depression
as shown. DO NOT overtighten.
4. Slide Shutter Trigger over Trigger Extension. Tighten onto round depression
as shown. DO NOT overtighten.
5. Due to the protrusion of the Trigger Extension + Shutter Trigger, care should
be taken when traveling. If the Trigger Extension + Shutter Trigger cannot
be adequately protected, it is recommended that the Trigger Extension +
Shutter Trigger should be removed and reinstalled once you reach your
destination.
Installation
4077.93_Shutter_Trigger_Extension_2-1116
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
[email protected]
© 2016 Ikelite Underwater Systems
Trigger
Extension
Shutter
Trigger
Shutter
Trigger
Base
1. Remove Shutter Trigger using 1/16” Hex Head Wrench.
2. Check Set Screw tightness of Shutter Trigger Base. DO NOT
overtighten.
3. Slide Extension over Shutter Trigger Base. Tighten onto round depression
as shown. DO NOT overtighten.
4. Slide Shutter Trigger over Trigger Extension. Tighten onto round depression
as shown. DO NOT overtighten.
5. Due to the protrusion of the Trigger Extension + Shutter Trigger, care should
be taken when traveling. If the Trigger Extension + Shutter Trigger cannot
be adequately protected, it is recommended that the Trigger Extension +
Shutter Trigger should be removed and reinstalled once you reach your
destination.
Installation
4077.93_Shutter_Trigger_Extension_2-1116
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
[email protected]
© 2016 Ikelite Underwater Systems
Trigger
Extension
Shutter
Trigger
Shutter
Trigger
Base
1. Remove Shutter Trigger using 1/16” Hex Head Wrench.
2. Check Set Screw tightness of Shutter Trigger Base. DO NOT
overtighten.
3. Slide Extension over Shutter Trigger Base. Tighten onto round depression
as shown. DO NOT overtighten.
4. Slide Shutter Trigger over Trigger Extension. Tighten onto round depression
as shown. DO NOT overtighten.
5. Due to the protrusion of the Trigger Extension + Shutter Trigger, care should
be taken when traveling. If the Trigger Extension + Shutter Trigger cannot
be adequately protected, it is recommended that the Trigger Extension +
Shutter Trigger should be removed and reinstalled once you reach your
destination.
Installation
4077.93_Shutter_Trigger_Extension_2-1116
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
[email protected]
© 2016 Ikelite Underwater Systems
Trigger
Extension
Shutter
Trigger
Shutter
Trigger
Base
/