The TE AG 115/600 angle grinder is a high-quality tool for experts with exacting demands, whose strong points are demonstrated to the full on a broad
spectrum of cutting, grinding and roughing jobs everywhere in the home, workshop and garage. A wheel guard with no-tool quick-adjust facility can be
adapted with just a twist of the hand to any task, while the spindle stop permits easy and speed tool change.
TE-AG 115/600
Angle Grinder
Item No.: 4430855
Ident No.: 11045
Bar Code: 4006825593402
Features
Disk guard with quick adjust-
Spindle lock for easy disc change-
Low in vibrations-
Sturdy and flat metal gear head-
Additional handle and main handle with soft grip-
Additional handle can be fitted in 3 positions-
Restart protection-
Safety switch-
Face spanner can be stored in additional handle-
Cable clip for fixing coilded cable-
Cutting wheel not included-
Technical Data
- Mains supply 230 V | 50 Hz
- Power 600 W
- Idle speed 12000 min^-1
- Disc diameter 115 mm
Logistic Data
- Product weight 1.88 kg
- Gross weight single packaging 2.5 kg
- Dimensions single packaging 325 x 130 x 125 mm
- Pieces per export carton 6 Pieces
- Gross weight export carton 16.3 kg
- Dimensions export carton 430 x 340 x 250 mm
- Container quantity (20"/40"/40"HC) 4620 | 9640 | 11160
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 01.03.2016 10:14
Page 1
Available as special accessories
TS 125/115
Cutting Stand
Item No.: 4431040
Bar Code: 4006825506457
Einhell Grey
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 01.03.2016 10:14
Page 2
/