Barco F22 series Quick start guide

www.barco.com

Barco

President Kennedypark 35

B-8520 Kortrijk

R59770784 Rev.00, September 2014

Parts

• R9023056 - F22 series projector (A);

• R8552515 - Adapter plate (B);

• R3631229 - Hexagonal screw (3x) (C);

• R8395159 - Adjustable frame (D);

• A577501 - Hexagonal bolt (4x) (E);

• R367380 - Washers (4x) (F);

• B364195 - Hexagonal nut (4x) (G);

Tools

• Open end wrench 10 mm;

• Open end wrench 8 mm;

• Open end wrench 7 mm;

• Slotted screwdriver;

• Measuring scale.

Adjustable frame for F22 series projectors Quick Installation Guide

Step 1: Mount the adapter plate as illustrated: align the hexagonal screws and

holes of the adapter plate with the ceiling holes of the projector (at the bottom side).

Step 3: Mount the adjustable frame as illustrated: align the hexagonal bolts, washers,

hexagonal nuts and holes of the adjustable frame with the holes of the adapter plate.

See the two drawings shown in tandem below.

Step 4: Tighten the hexagonal bolts and hexagonal nuts (use them as counter nut) to

ﬁx the adjustable frame on the adapter plate.

Step 2: Tighten the hexagonal screws to ﬁx the adapter plate on the projector.