R W FLAME 68 Inch Recessed Electric Fireplace Heater 750W-1500W User manual

  • Hello! I am an AI chatbot trained to assist you with the R W FLAME 68 Inch Recessed Electric Fireplace Heater 750W-1500W User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MC36 (Installation Completion) MC42 (Installation Completion)
INSTALLATION INSTRUCTIONS FOR ACCESSORIES
Step 7 The Installation of Simulated Charcoal
When you get your electric fireplace and start installing it, you can choose to install
the simulated charcoal or the crystal, or both, to achieve the desired effect.
2.MC36
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown.
The charcoals of MC36 should be placed from
left to right following the order: L1-L2-L3.
3.MC42
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown.
The charcoals of MC42 should be placed from
left to right following the order: L1-L2-L3-L4.
4.MC50
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown.
The charcoals of MC50 should be placed from
left to right following the order: L5-L1-L2-L3-L4.
NOTE: Media bed kits may have sharp edges. Wear safety glasses and gloves when handling.
If you already have our electric fireplace, you can purchase simulated charcoal accessories
on our website to achieve the effect.
How to choose simulated charcoal:
Thank you for purchasing this product! If you have questions about assembly or
operation of this product, if the product is damaged, or if there are any missing parts,
please contact us via Amazon Message or call customer service at 213-4467172 or 661-4358826.
5.MC60
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown. The
charcoals of MC60 should be placed from left to
right following the order: L1-L2-L3-L2-L1-L5.
MC68 (Installation Completion)
6.MC68
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown. The
charcoals of MC68 should be placed from left to
right following the order: L5-L1-L2-L3-L2-L1-L5.
MC60 (Installation Completion)
MC50 (Installation Completion)
MC30 (Installation Completion)
Packing List Simulated Charcoal Installation Steps
and Requirements
1.MC30
Carefully place the simulated charcoals in the
slot in the front of the appliance as shown.
The charcoals of MC30 should be placed from
left to right following the order: 30A-30B.
L1 L2 L3
L1 L2 L3
L4 L5
L1 L1L2 L2L3 L5
L5 L4L1 L3L2
/