Ortlieb 2111717 Operating instructions

Type
Operating instructions

Ortlieb 2111717 Quick Rack is a lightweight bicycle rack with a quick-release system for rapid installation and removal. It allows you to transform your race bike into a commuter bike in seconds. The rack has two hook-in levels for simultaneous use of a rack-top basket and panniers. It's compatible with all bags with QL1/2.1/3/3.1 and the Top-Lock System. The rack fits frames with M5 or M6 rack eyelets and can be used with full-suspension bicycles. It includes a complete mounting kit and a bracket for an optional rear light. The maximum load capacity is 20kg / 44.1lbs.

Ortlieb 2111717 Quick Rack is a lightweight bicycle rack with a quick-release system for rapid installation and removal. It allows you to transform your race bike into a commuter bike in seconds. The rack has two hook-in levels for simultaneous use of a rack-top basket and panniers. It's compatible with all bags with QL1/2.1/3/3.1 and the Top-Lock System. The rack fits frames with M5 or M6 rack eyelets and can be used with full-suspension bicycles. It includes a complete mounting kit and a bracket for an optional rear light. The maximum load capacity is 20kg / 44.1lbs.

ORTLIEB Sportartikel GmbH · Rainstrasse 6 · 91560 · Heilsbronn, Germany · T +49 9872 800-0 · F +49 9872 800-266 · E [email protected] · www.ortlieb.com
PRODUCT INFO
40cm/15.7in
39cm/15.4in
18,5cm/7.3in
Quick Rack
QL1
system
QL2.1
system
QL3.1
system
TOP
LOCK
SPECIFICATIONS:
Infos on IP-symbols: www.ortlieb.com/us/service/technical/ip-symbols/
Maximum width 190 mm
Aluminium tube (10 mm)
Upper mounting level for panniers
Upper rack connection to seat post
Second mounting level for panniers
Platform for Top-Lock products, eg. Trunk-Bag or Up-Town Rack
Different stay lengths allow a universal t
QUICK RACK
Bike rack with quick release system for rapid installation and removal
+ Lightweight bicycle rack with quick release system for rapid installation and removal
+ 5/15 method: 5 sec removal, 15 sec installation
+ Quick transformation from race bike to commuter bike
+ Leaves a clean bike, no xed rack
+ Fits frames with M5 or M6 rack eyelets
+ Can be used with full suspension bicycles
+ Different stay lengths allow a universal t
+ Touring rack with two hook-in levels, e.g. for simultaneous use of a rack top basket and panniers
+ Allows for direct attachment of all bags with QL1/2.1/3/3.1 and the Top-Lock System
+ QL3/3.1 attachment elements can be removed
+ Suitable for 26“-28“ and 29“ (limited compatibility)
+ Horizontal and vertical struts with 10 mm tube diameter
+ Includes a complete mounting kit: no additional adapters required for most applications
+ Mounting bracket for optional rear light (light not included)
+ Maximum load capacity: 20kg / 44.1lbs
Contents: Rack with mounting material and additional extra long mounting stay (300 mm), Mounting bracket for optional rear light, QL3/QL3.1
mounting clamps
Optional accessory: Quick Rack Mudguard 38 mm (F78107), 50 mm (F78108) and 72 mm (F78109), Quick Rack Seat Stay Adapter (F78106)
Note: Follow mounting instructions
Attention: Rack is not suitable for mounting and using child seats; Quick Rack is not suitable for carbon bike frames with carbon seatpost
(Mounting on metal seatpost and M5/M6 thread on carbon frame is ok).
material wheel size tube diameter/mm width support surface/mm max. width/mm weight g/oz max. capacity kg/lbs
Aluminium 26“-28“, 29“ limit. compatibility 10 100 190 580/20.5 20/4 4.1
Hooks for tting the rack to the lower contact
points anchored to the bicycle frame
Mounting:
Included in delivery:
Screw-on contact points (M5, M6)
for mounting the rack
Mounting bracket for optional
rear light (light not included)
Screw-on QL3/3.1
mounting clamps
Additional extra long
mounting stay (300 mm)
Dimensions rack:
  • Page 1 1

Ortlieb 2111717 Operating instructions

Type
Operating instructions

Ortlieb 2111717 Quick Rack is a lightweight bicycle rack with a quick-release system for rapid installation and removal. It allows you to transform your race bike into a commuter bike in seconds. The rack has two hook-in levels for simultaneous use of a rack-top basket and panniers. It's compatible with all bags with QL1/2.1/3/3.1 and the Top-Lock System. The rack fits frames with M5 or M6 rack eyelets and can be used with full-suspension bicycles. It includes a complete mounting kit and a bracket for an optional rear light. The maximum load capacity is 20kg / 44.1lbs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI