INNOTECK DS-5040 User manual

Category
Coffee makers
Type
User manual

INNOTECK DS-5040 is a 15-bar espresso coffee maker that allows you to brew delicious Italian coffee at home. With a 1500ml water tank and a 950W power output, it can make up to two cups of coffee simultaneously. It also features a steam milk-frothing function for creating creamy cappuccinos and lattes, and a hot water function for making tea or hot chocolate.

INNOTECK DS-5040 is a 15-bar espresso coffee maker that allows you to brew delicious Italian coffee at home. With a 1500ml water tank and a 950W power output, it can make up to two cups of coffee simultaneously. It also features a steam milk-frothing function for creating creamy cappuccinos and lattes, and a hot water function for making tea or hot chocolate.

INDEX
Important Safeguards 1
Brief Instruction 1
Product Feature 1
Components and Installation Diagram 2
Assembly Diagram for First-cup / Second-cup Strainer and Metal Funnel 2
Precautions 3
Preparation for the First use / the use under Cold Machine Status 4
Start Making Coffee/under the Hot Machine Status 4
Steam Milk-frothing Function 5
Hot Water Function 5
Coffee Brewing Time Setting Function 5
Reset to Factory Setting 6
Cleaning and Maintenance 6
Clean Mineral Precipitation 6
Trouble Shooting 7
Correct Disposal of This Product 7
Warranty 8
Terms & Conditions 9
1
Important Safeguards
This appliance is not intended for use by people ( including children ) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
WARNING: The filling aperture must not be opened during use.
The appliance must not be immersed.
The heating element surface is subject to residual heat after use.
Cleaning and user maintenance shall not be made by children without supervision.
Brief Instruction
Thank you for choosing our coffee maker, a 15bar espresso coffee maker, characterized by classic and
elegant styling, rich coffee grease and froth, easy and safe operation, and easy cleaning. It can make a cup
of Italian mellow coffee at any time!
Product Feature
1. Classic and stable appearance, dominated by stainless steel element.
2. Separate water tank and detachable water-receiving tray.
3. Adjustable steam, good for frothing milk.
4. Can make two cups of coffee in one time, hot water and coffee by manual control.
5. With cup preheating function.
6. Voltage: 220-240V ~ 50-60Hz
Power: 950W
Espresso Pressure: 15 Bar
Capacity of Water Tank: 1500ML
2
Components and Installation Diagram
1.On/Off button
2.Single-cup coffee button
3.Double-cups coffee button
4.Manual control button
5.Steam button
6.Water-receiving tray mat
7.Water-receiving tray
8.Single-cup strainer
9. Double-cup strainer
10.Metal funnel
11. Press-type hook buckle(buckle the
strainer upon pouring coffee grounds)
12.Funnel handle
13.Water tank lid
14.Water tank
15.Steam knob
16.Steam pipe assembly
17.Steam jacket
18.Coffee spoon
Assembly Diagram for First-cup/Second-cup Strainer and Metal Funnel:
1. Align the notch on the " Single-cup / double-cup strainer " with the notch on the " Metal funnel "and pit
it axially.
2. Rotate the " Single-cup / double-cup strainer " to stick the bump into the " Metal funnel ".
3
Precautions
1. To ensure safety, please read the Product Manual carefully to master the correct method of use.
2. Please keep the Product Manual well for future reference.
3. Check whether the voltage of the socket corresponds to the parameter in the nameplate of the coffee
maker before use.
4. The coffee maker is equipped with the grounding protection; please make sure that a grounded socket is
provided.
5. Be sure to keep children away from it when in use.
6. In order to prevent fire and electric shock, be sure to keep power cord or plug away from water or other
liquids; be sure not to damage, excessively bend or stretch the power cord; do not place heavy objects on
the power cord.
7. When cleaning the machine or not in use, please unplug the plug, and clean the accessories. Make sure
your appliance cools down.
8. Do not use the coffee maker in high-temperatures, high-field or humid environment; do not place the
coffee maker on any hot surface, near a fire source, or on other electrical appliances, such as refrigerator.
9. In case of damaged power cord or plug, fault in coffee maker or other damages, be sure not to turn on
the coffee maker; please return it to the nearest authorized service center for inspection or contact the
dealer.
10. Be sure to use original accessories.
11. The coffee maker is only used for making coffee; please do not use it for other purposes. Please place
coffee machine in dry environments at all times.
12. Please place the coffee maker on a flat surface or table; be sure not to hang the power cord on the
edge of a table or counter.
13. Make sure that the power cord does not touch the hot surface of the appliance.
14. Be sure not to touch the hot components on the surface by hands white operating the coffee maker.
15. Clean and maintain components of the coffee maker regularly to ensure quality of coffee and extend
the service life of the coffee maker.
16. When the coffee machine is working, do not move or turn off the power at will.
17. It is forbidden to operate under the water-free status
18. Do not clean the coffee maker or the power cord in water or other liquids.
19. Do not use it outdoors.
20. Please boil it twice with water to remove the odor before the first use.
21. For household use only, be sure not to use it for other purposes.
4
Preparation for First use / use under Cold Machine Status
1. Pour water into the water tank; the water level must not exceed the" Max " mark in the water tank.
2. Plug in the power cord into a power socket and press " On / Off button ", turn on the " Steam knob",
when all other buttons are illuminating, press the " Manual control button ", let the water flow out of the
steam pipe about 100ml, then press the " Manual control button " again to stop brewing the water and
turn off the " Steam knob ", after that the coffee maker starts pre-heating; until all the button lights are
always on, the preheating is finished, with need of about 2 minutes.
Note: The internal electronic pump will vibrate when the water is discharged from the coffee maker.
3. Press the " Double-cup coffee button "to flow out the hot water to clean the coffee strainer or the
coffee cup.
Start Making Coffee / under the Hot Machine Status
1. While the coffee maker is preheating, add some coffee powder into the" Metal strainer " and press it
down with the" Coffee spoon "; moreover, clean the coffee powder on the edge of the funnel with a brush
or by hands.
2. Insert the " Funnel " and lock it according to the indication sign, then place the coffee cup beneath the
" Funnel ".
3. After the " Single-cup / double-cup coffee button " is selected, one to two cups of coffee flows out of
the coffee maker; the coffee maker will stop brewing coffee automatically after its done.
4. Press the " Manual control button " to make appropriate amount of coffee according to your needs, and
press the " Manual control button " again to stop discharging coffee. Moreover, adjust the position of the
coffee cup, so that the coffee liquid flows into the cup along the cup wall.
5. Wait a while until the coffee drips off.
6. Turn the funnel handle from right to left, then remove the metal funnel and the strainer. Be careful
contents might be hot. Hold funnel handle and press the hook buckle, pour out the coffee grounds, then
clean the strainer, metal funnel and the brewing head carefully.
7. If the coffee machine is not used for a long time, empty the water tank and turn it off. Clean it before
using it the next time.
Note: Add one measuring spoon of coffee powder ( recommend 7g ) for each cup. For coffee powder
please use espresso machine special coffee powder and be sure it isn’t too fine.
5
Steam Milk-Frothing Function
1. When the " Steam button " is selected, the light starts flashing, until the indicator light changes from
flashing into being on always; then the pre-heating is finished.
2. Pour the iced whole milk of 1/3 in the garland cup, insert the steam nozzle into the 1CM-deep milk
surface, and then slowly unscrew the " Steam knob " until the steam sprays out.
Note: The size of the steam can be adjusted according to personal proficiency. A little water in the steam
pipe shall be released before the milk frothing.
3. When the milk temperature reaches about 75 degrees, the milk froth starts to expand; then turn off the
" Steam knob " and the " Steam button " .
Note: After the milk froth is finished, clean the milk on the surface of the steam jacket with a damp cloth
timely, and spray out the steam again for 5s to prevent the milk from being dried up so it doesn’t block the
steam outlet.
4. Turn off the " On / Off button " finally.
5. Then shake the garland cup on the table to fully melt the milk froth, and then pour it into the coffee cup.
Note: Cocoa powder / chocolate cream can be sprinkled on the coffee according to personal preference;
additionally, various fancy utensils can be used in making a cup of your favorite Italian fancy coffee.
Note: When milk foaming is complete and you want to make another cup of espresso, please don’t remove
the metal funnel immediately, it may cause coffee grounds to splash. So make sure the coffee machine is
completely cooled before using. In order to cool down the coffee machine properly, we suggest to proceed
“ Hot Water Function ” .
Hot Water Function
1. After the " On / Off button " is selected, other button lights flash, and the coffee maker starts
pre-heating; after the pre-heating is finished, the button light is always on; press the " Manual control
button " and turn on the " Steam knob ", until the steam nozzle discharges hot water. The hot water can be
used for drinking, cleaning or heating cups.
2. After completion, turn off the " Steam knob " to " OFF " , and then press the " Steam button " .
3. Turn off the " On / Off button " finally.
Coffee Brewing Time Setting Function
Under the status that the pre-heating has been finished, press and hold the " single-cup or double-cup
coffee button " for three seconds to make the coffee maker beep three times; when the coffee in the cup
reaches the required set amount, press the " Single-cup or double-cup coffee button" to make the coffee
maker beep three times; at this time, the time memory function is set. Coffee discharging time is set
between 8-60 seconds; otherwise the setting is failed. The next coffee discharging time will follow the last
set value.
6
Reset to Factory Setting
Under the status that the pre-heating has been finished, press and hold the " Single-cup double-cup coffee
button" for three seconds to make the coffee maker beep three times; 5 button lights flash 5 times, then
the reset to factory setting is finished.
Cleaning and Maintenance:
1. Cut off the power until the coffee maker completely cools down before cleaning.
2. Wipe exterior of the coffee maker and accessories with a damp cloth or a clean sponge.
Note: Do not clean it with alcohol or solvent cleaner; do not immerse the coffee maker into water upon
cleaning.
3. Unscrew the coffee funnel, and then clean the coffee grounds inside the strainer.
Clean Mineral Precipitation
1. In order to ensure the function of the coffee machine, clean water and pure taste of the coffee, the
coffee machine needs to be descaled after 2-3 months of use.
2. Add water to the water tank up to Max level, and add the descaler to the water tank according to the
dosage requirements; if there is no descaler, citric acid can be used instead ( the ratio to water is 3:100 ).
3. Put the Funnel assembly into the coffee machine ( without coffee powder ), press the " On / Off button ",
press the coffee button until the water output is 200mL after the coffee function indicator is always on, and
then leave the descaler inside the machine for 10 minutes.
4. After the coffee function indicator is always on, turn on the Steam knob, press the coffee button to put
200mL of hot water, and then close the knob and coffee button.
5. Repeat steps 3 and 4 ( do not wait for 10 minutes in step 3 ) until the water in the tank is used up.
6. Use tap water to make coffee ( without coffee powder ), repeat steps 3 and 4 more than three times ( do
not wait for 10 minutes for step 3 ) until the coffee machine pipeline is completely cleaned.
7
Trouble Shooting
Symptom
Cause
Corrections
No water
Whether there is water in
the water tank.
Add an appropriate amount of water into the
water tank.
Whether the water tank is
stuck in place.
Reassemble the water tank.
Still no water after 120s
operation or under the
status that the water tank
is empty,the coffee maker
is idle for too long.
Pick up the water tank then add 5ml water to the
inlet, install the tank and use the hot water
function one time.
No steam
Steam outlet is blocked
Poke the steam outlet with a thin iron wire.
Whether there is water in
the water tank.
Add an appropriate amount of water into the
water tank.
Whether the water tank is
stuck in place.
Reassemble the water tank.
Poor milk froth
Whether the whole milk is
used.
Use whole milk.
Whether the refrigerated
milk is used.
Refrigerate milk to 2-5degrees.
Less grease
Coffee powder is too
coarse.
Replace the coffee powder.
Coffee powder is not
compacted.
Compact the coffee powder with an appropriate
pressure.
Too much / few coffer
flow
Too much / few coffee
powder
The coffee powder should not be to crude or too
fine, should be in standard quality and quantity
(1 coffee spoon for one cup and 2 coffee spoon
for two cups ).
Correct Disposal of this Product
retailer where the product was purchased. They can take this product for environmental safe recycling.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

INNOTECK DS-5040 User manual

Category
Coffee makers
Type
User manual

INNOTECK DS-5040 is a 15-bar espresso coffee maker that allows you to brew delicious Italian coffee at home. With a 1500ml water tank and a 950W power output, it can make up to two cups of coffee simultaneously. It also features a steam milk-frothing function for creating creamy cappuccinos and lattes, and a hot water function for making tea or hot chocolate.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI