Nexxt Solutions F3206-US, a smart Wi-Fi plug, offers effortless control over your home appliances right from your smartphone. With its user-friendly app, you can power on/off devices, set schedules, and monitor energy consumption. Experience the convenience of smart home automation with Nexxt Solutions.
Nexxt Solutions F3206-US, a smart Wi-Fi plug, offers effortless control over your home appliances right from your smartphone. With its user-friendly app, you can power on/off devices, set schedules, and monitor energy consumption. Experience the convenience of smart home automation with Nexxt Solutions.
385
80
55
ޡ
䈤᰾Җ
J䬌⡸㓨
ᢰᵟ㾱≲
᮷ᆇǃമṸഋ㢢ঠࡧ
䈤᰾ҖѪৼ䶒ঠࡧˈ
㾱≲᮷ᆇᇩㅹঠࡧᾊǃᮤ喀ˈнݱ䇨ᴹ↚ᯌ䟽ᖡㅹ⧠䊑
ṩᦞ㾱≲൘অњᖙⴂ᭮㖞䈤᰾ҖаᕐDŽ
䈤᰾Җᣈਐᯩᔿ৺㾱≲䴰ㅖਸ仾⩤ഋᣈ亥
⡸ᵜ ᴤ᭩ਧ 䈤᰾ ؞᭩Ӫ ؞᭩ᰕᵏ
䇮䇑
ṑሩ
ᇑṨ
ᐕ㢪
ḷ ߶ॆ
ᢩ߶
ᰕᵏ
䟽䟿 ∄ֻ
ㅜᕐ
ᶝᐎ呯ц⭥ಘ㛑ԭᴹ䲀ޜਨ
ᶝᐎᐼᲪ⭥ᆀᴹ䲀ޜਨ
䧭ㅷ㽯㼄 9NN
YNN
pNN
㾝䒓㕃㽯㼄
Ⱆ䊵
)86 ѝᙗ⡸
$5*%㖾ḷঅᨂ
9 ⡸ᵜ
⡸ᵜਧ˖9ᰕᵏ˖
6. Parameters
5. Experience
1.Install APP
Scan QR code (compatible with Android & iOS system),
or search “Smart Life” in APP Store or Google Play
m
patible with Android
&
i
OS
s
y
stem
),
i
fe
” in APP
S
tore or
G
oo
g
le
Play
Smart Life
Product: 10A Wi-Fi Smart Plug
Model: F3206-US
Rated Voltage: 100-240V~
Rated Current: 10A(Max.)
AC Frequency: 50/60Hz
Max.Load Power: 1100W
ON/Off Button
Press Long Time,Restore to Factory Settings
State Light
Power switch Long
press to Recovery
Factory setting
Wi-Fi indicator
Configuration mode
indicator flash 5-6times/second
i
n
di
ca
t
or
fl
as
h
5
-
6ti
mes
/second
2. Usage
scenarios
SmartPlu g
Connect power
Phone connect
toWiFi Open APP
Smart Life
Power Socket
4.
Configure
Add new devices Input WiFi password
Click “Next”
Click “Plug” enter
operation interface
3. Register APP
Series Connection are not allowed
5. Experience
Personal setting
Led Switch
Led Switch
Time setting
Return
Current page
ON/Off key
High Voltage - Disconnect power
supply before servicing
La haute tension-Déconnecter
l’alimentation électrique avant
l’entretien
Federal Communication Commission
Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum distance
20cm between the radiator & your body.
RF Exposure: A distance of 20cm shall be
maintained between the antenna and users,
and the transmitter module may not be
co-located with any other transmitter or
antenna.
Non-modification Statement:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
This equipment complies with ISED RSS-102
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with a
minimum distance of 20cm between the
radiator and any part of your body.
Pour se conformer aux exigences de
conformité CNR 102 RF exposition, une
distance de séparation d'au moins 20 cm doit
être maintenue entre l'antenne de cet appareil
ettoutes les personnes.
CAN ICES-3 (B)/NMB-3(B)
ISED Statement
This Class [B] digital apparatus complies with
Canadian CAN ICES-3(B).
Cet appareil numérique de la classe [B] est
conforme à la norme NMB-3(B)du Canada.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation,Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the following
two conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence
contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et
Développement économique Canada
applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. L’appareil ne doit pas produire debrouillage;
2. L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le
fonctionnement
1
7
23456
-
1
Nexxt Solutions F3206-US, a smart Wi-Fi plug, offers effortless control over your home appliances right from your smartphone. With its user-friendly app, you can power on/off devices, set schedules, and monitor energy consumption. Experience the convenience of smart home automation with Nexxt Solutions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Nexxt Solutions F3206-US Mode d'emploi