Osprey Raptor Pro is a versatile and durable backpack designed for mountain biking enthusiasts. It features a D3O BP4 Full Back CE Level 1 Protector for impact absorption, a secure side panel pocket for leg/arm protection, and a fully padded front shield for full-face helmet carry. The stretch mesh zippered hipbelt pockets provide on-trail access for small items, and the hydration sleeve with direct-zip access and hose path ensures easy hydration. With its capacity, ventilation, fit, and stability, the Raptor Pro is the perfect companion for your next mountain biking adventure.
Osprey Raptor Pro is a versatile and durable backpack designed for mountain biking enthusiasts. It features a D3O BP4 Full Back CE Level 1 Protector for impact absorption, a secure side panel pocket for leg/arm protection, and a fully padded front shield for full-face helmet carry. The stretch mesh zippered hipbelt pockets provide on-trail access for small items, and the hydration sleeve with direct-zip access and hose path ensures easy hydration. With its capacity, ventilation, fit, and stability, the Raptor Pro is the perfect companion for your next mountain biking adventure.
osprey.com
OWNER'S MANUAL
RAPTOR PRO
Welcome to Osprey. We pride ourselves on creating the most functional,
durable and innovative carrying products for your adventures. Please
refer to this owner’s manual for information on product features, use,
maintenance, customer service and warranty.
RAPTOR PRO 18
OUR HOLISTIC APPROACH to sustainability
uses high quality materials to lower our impact on
the environment, promote a safe chemical process
and care for the people in our supply chain.
+
View additional details about the sustainable fabrics
included in this product on page 2 and on individual product
hangtags at the point of sale.
RAPTOR PRO SERIES 2
OVERVIEW
FEATURES
1 D3O® BP4 Full Back CE Level 1 Protector: Helps absorb impact in the event of a
fall
2 Secure side panel pockets with dual compression for leg/arm protection storage
3 Fully padded front shield with upper compression for full face helmets carry
4 Scratch-free heat-embossed zippered slash pocket for sunglasses and electronics
5 Stretch mesh zippered hipbelt pockets provide on-trail access for small items
6 Hydration sleeve with direct-zip access and hose path for easy loading
7 LidLock bike helmet attachment
8 Blinky light attachment and reflective patch for safety
9 Removable roll-up tool pouch keeps tools handy and organized
10 Lightweight sternum strap magnet for easy access to water
+ Bike tool organization in main compartment
+ Hydraulics™ LT 2.5-liter reservoir included
FABRIC
MAIN 210D nylon, DWR treatment made without PFAS
BOTTOM 210D nylon, DWR treatment made without PFAS
PRODUCT PROMISE
Built for rowdy riders, the Raptor Pro integrates the D3O® CE Level 1 back
protector to help absorb impact. Whether you’re self-shuttling, accessing
machine groomed and feature-built bike playgrounds via lifts or logging long
hours in the backcountry, the Raptor Pro has the capacity, ventilation, t and
stability to take lap after lap of punishment.
7
3
2
4
6
1
5
8
9
10
RAPTOR PRO SERIES 3
RAPTOR PRO
UNISEX
SPECSO/S
Cubic Inches 1098
Liters 18
Pounds 3.28 lbs.*
Kilograms 1.49 kg.*
Inches 18h x 10w x 9d in.
Centimeters 46h x 26w x 22d cm.
INCLUDED Reservoir LT 2.5 L
Tool Roll
SPECS
* Pack weight does not include reservoir
RAPTOR PRO SERIES 4
SUSPENSION/CARRY
RAPTOR PRO
TORSO O/S 17-19" / 43-48 cm
HOW TO MEASURE YOUR TORSO FOR YOUR PACK
AIRSCAPE
BACKPANEL
D3O® BP4 L1
BACK
PROTECTOR
HIPBELT
HARNESS
D3O® BP4 L1 BACK PROTECTOR
+ Exceeds CE Level 1 certification
+ D3O® uses patented, patent-pending and proprietary
technologies to make rate-sensitive, soft, flexible
materials with high shock absorbing properties
+ Lightweight and exceptionally soft and flexible design,
providing riding comfort without sacrificing durability and
protection
+ Highly ventilated geometry for maximum breathability
+ Easily removable for inspection and cleaning
AIRSCAPE™ BACKPANEL
+ Mesh-covered, extra deep ridged foam allows maximum
ventilation while keeping the load close to the body
HARNESS
+ Curved bike-specific winged shoulder strap shape
provides comfort and stability
+ Soft breathable spacermesh contact surfaces and die-
cut foam ventilation
HIPBELT
+ Airmesh wrap hipbelt with zippered pockets provide
stability and breathability
+ Wide 38 mm webbing with secure aluminum buckle
closure
SIZING / FIT
RAPTOR PRO SERIES 5
2 BUCKLE HIPBELT
Buckle and tighten the hipbelt evenly using Osprey’s cross-body
ErgoPull. The padding of the hipbelt should wrap around the hips with
approximately 1-3 in/2.5-6 cm of webbing between the buckle and the
hipbelt when tightened.
3 HIPBELT ADJUSTMENT
If the hipbelt is too large and “tops out” or does not offer the preferred
amount of coverage, the customer may need a different pack size, model
or adjustment.
4 TIGHTEN SHOULDER STRAP
Tighten the shoulder harness
straps by pulling them down and
back.
6 CHECK TORSO LENGTH
Locate the harness yoke – this is where the harness straps come together
near the base of the user’s neck. Locate the C7 vertebra – the large
protruding bone at the base of the neck. The yoke should be 1 in/2.5 cm -
2 in/5 cm below the C7 vertebra.
1 POSITION THE PACK
Completely loosen the pack’s hipbelt, harness and load-lifter straps (if
applicable). Load the pack with 10-20 lb/4-9 kg of gear. Put the pack on
and make sure the hipbelt is centered and rests over the hipbone. The
hipbelt padding should sit halfway above/below the hipbone.
PACK FIT INSTRUCTIONS SIZING/FIT DISCLAIMER: Pack depicted in images
may not be the pack represented in this owner’s manual.
5 TIGHTEN LOAD LIFTERS (IF
APPLICABLE)
Tightening the load lifters will pull
the pack close to the body and
help stabilize the load. If the torso
length on the pack is adjusted
correctly, the load lifters will sit
between a 30- to 60-degree
angle and align naturally with the
shoulder straps.
7 CHECK HARNESS FIT
The harness straps should wrap fully around the shoulders with no gaps
between the pack and back. The padded part of the shoulder straps
should end at 2 in/5 cm or more below the armpits without topping out.
8 HARNESS/SHOULDER STRAP ADJUSTMENT
If the harness is too small or large, but the torso length of the pack
is correct, the customer may need a different pack size, model or
adjustment,
9 BUCKLE THE STERNUM STRAP
The sternum strap should be adjusted to approximately 2 in/5 cm below
the collarbone.
RAPTOR PRO SERIES 6
FEATURE DETAILS
BACK PROTECTION
D3O® BP4 Full Back CE Level 1 Protector helps absorb impact in the
event of a fall.
DUAL SIDE PANEL POCKETS
With compression for leg/arm
protection storage.
RESERVOIR SLEEVE
The dedicated reservoir sleeve is
compatible with reservoirs up to 3L.
+ An internal hanging loop with buckle
ensures proper vertical orientation
and stability
+ The backpanel hydration exit port
is centered, allowing routing to the
right or left side of the harness
+ Elasticized routing straps on the
pack’s harness hold the reservoir
hose in place
For more information on Osprey's full
line of reservoirs and reservoir care, visit
osprey.com.
RESERVOIR BITE VALVE MAGNET
The sternum strap magnet allows
for quick access to the reservoir bite
valve.
LIDLOCK HELMET ATTACHMENT
Osprey’s LidLock easily and securely
carries a bicycle helmet.
1. Locate the LidLock helmet
attachment clip near the top of
the pack’s front panel and pull
away from the pack.
2. In the vertical position, pass
LidLock through helmet vent
from the bottom and engage in
horizontal position.
3. Inside the pack's front slash
pocket is a cord loop to increase
or decrease the LidLock's tension.
FULL FACE HELMET CARRY
To attach a full face helmet:
1. Unclip the two upper compression
straps.
2. Place the helmet face opening up
on the front panel of the pack and
thread the two compression straps
through the helmet’s face opening.
3. Re-clip the compression strap
buckles and tension them to hold
the helmet securely to the pack.
4. Clip the helmet’s chinstrap through
the blinker light attachment near
the base of the front panel for extra
carrying stability
BIKE TOOL ROLL
A removable roll-out tool pouch is
integrated into its own zippered lower
pocket for quick access. It provides
tool organization for bike essentials.
RAPTOR PRO SERIES 7
FEATURE DETAILS
INTERNAL ORGANIZATION
Organization for essentials and pocketing
sized for bike-specific tools and gear.
BLINKER LIGHT ATTACHMENT
Blinker light attachment and reflective
patch for safety.
SCRATCH-FREE SLASH POCKET
Scratch-free, heat-embossed zippered
slash pocket for sunglasses or
electronics.
ZIPPERED MESH HIPBELT
POCKETS
On-trail access for small items.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Osprey Raptor Pro is a versatile and durable backpack designed for mountain biking enthusiasts. It features a D3O BP4 Full Back CE Level 1 Protector for impact absorption, a secure side panel pocket for leg/arm protection, and a fully padded front shield for full-face helmet carry. The stretch mesh zippered hipbelt pockets provide on-trail access for small items, and the hydration sleeve with direct-zip access and hose path ensures easy hydration. With its capacity, ventilation, fit, and stability, the Raptor Pro is the perfect companion for your next mountain biking adventure.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Osprey SISKIN Series Owner's manual
-
-
-
Osprey F21 Owner's manual
-
-
-
-
-
-
Other documents
-
eagle creek 55L Tour Travel Pack User guide
-
eagle creek Tour Travel Pack User guide
-
Kenwood 3-in-1 Owner's manual
-
Thule 3201963 User manual
-
Zagg 702009127 User manual
-
AirScape AH2-CF-1900 User manual
-
AirScape X9 VENTURA User manual
-
AirScape 2500 Lift User manual
-
-
Easyrig 2.5 Pat. User manual
