AGT INDUSTRIAL AGT-SVH60 Owner's manual

Brand: AGT INDUSTRIAL

Model: AGT-SVH60

Type: Owner's manual

AGT INDUSTRIAL AGT-SVH60 is a high-performance walk-behind dual-drum roller, powered by a reliable Honda GX160 / GX270 / GX390 engine or a CF178F diesel engine, ensuring quality assurance. With its CVT centrifugal clutch and hydraulic two-way travel, this machine offers precise control and maneuverability.

1/7

PRODUCT MANUAL

AGT-SVH60 Vibratory Roller

WARNING This equipment can not be installed, operated or repaired without

reading instructions.

Electricity must be hooked up by certified electrician.

Do not use this equipment beyond its rated capacity.

Missing parts or questions on assembly?

Please contact us.

AGT

2/7

Do appreciate you using our machines. We will continue to support your work

all the time. Thanks again.

1Product Introduction

This walk-behind roller using GX160 / GX270 / GX390 Honda engine type, CF178F

diesel-powered, high performance, quality assurance,Using centrifugal clutch CVT.

Hydraulic two-way travel, Using chain walking, torque, more stable. Exciting force is

controlled by the throttle directly, easy operation, mobile and flexible.

This machine features: small size, compact structure, foldable operating handle to the

operator with a comfortable operating environment, easy transport and collection after

folded. It also can be supported to use with large road rollers. Widely used in large auxiliary

road roller (subgrade, base surface, asphalt surface) sidewalk, covers in periphery, curbs,

small-scale pavement engineering, road pavement landfill compactor after patching

potholes, highway repair, backfill compaction, a small parking lot, stadium compaction.

Roads, municipal roads department, ideal for the square.

AGT

3/7

2Technical Data

model SVH60

weight (KG) 640

Packing size（mm）1600*850*1900

power（hp）9.6KW

Fuel capacity（L）2.7

Fuel type gasoline

Vibration frequency 70(HZ)

Climbing ability 30%

speed(KM/h) 3.8

Linear static pressure 45(N/CM)

type walk-behind dual-drum roller

Steel wheel size(mm) 380(D)×650(W)mm*2

3Precautions

1, before starting each launch, do check before operation, to avoid personal injury and

equipment damage

2,To prevent fires, Do ensure good ventilation, during operating, the engine is at least 1

meter distance from buildings and other equipment. Do not put combustibles at side of

engine .

3, children and pets must stay away from operating area, to prevent burns by gasoline

engine parts or to hurt by working equipment

4. Learn how to shut down operating device and control of all components quickly, never

allow untrained personnel to operate the equipment.

5. Do not put combustible materials ,such as gasoline, lighters and other equipment to side

in working machine the equipment. Adding fuel in a well ventilated place, refueling the

engine after stop running, because gasoline is highly flammable, it would be expolded

under some conditions

6. Do not overfill fuel tank, it should be no fuel at the neck of oil filler. If fuel overflows, it

must be removed and evaporated etc. before starting the engine.

7, Prohibited smoking or open flames, in the place of adding fuel and fuel storage

8, Engine exhaust, it contains carbon monoxide, avoid inhalation, and never operating

machine under closed, unventilated areas or poor ventilation

9 ,During engine is running, muffler will be very hot , this heat to maintain period of time

after stop working. Do not touch it to avoid burns or fire. After engine cool down, move it

to storage room.

AGT

4/7

4control device

1) fuel valve

Fuel valve for controlling the passage between the fuel tank and the carburetor, when the

engine is running, the fuel valve must be pulled to on position. When the engine is not used,

pull the fuel valve to off position. Prevent oil outflow in the carburetor, reducing the

possibility of leakage of gasoline.

2) engine switch

Engine switch controls ignition system, engine switch to ON position, start engine,

engine switch to OFF position, shut down engine.

3) choke lever

Choke choke control lever carburetor. When choke lever is located OFF position, it can

improve concentration of gasoline to make engine cold start. After engine is started, choke

lever located at ON position, to provide suitable fuel during its working, also provides right

fuel for starting engine heat engine.

4) throttle lever

Throttle lever controls engine speed, let throttle lever in the desired engine speed

position.

5run

(A) before the test run

1) Check engine and hydraulic tank and apperance of tubing and bottom, to see if the oil is

spilling.

2)Wipe off excess dirt and other obstacles, especially around muffler and recoil starter

3)Check appearance, if strong in all nuts, bolts and screws, if too loose in drive belt and

chain

4)check oil in engine and hydraulic oil tank , running in low fuel, result in engine

damage, unsteady gait, periodic replacement of engine oil and hydraulic oil. to avoid

damage in an accident ,check oil level before starting.

5) Check air filter, dirty air filter will reduce amount of air into carburetor, reducing engine

power.

6) Check if they are normal in V-belts, chains.

(B) road roller start operation

1) Put engine fuel valve plate to ON position , put hydraulic reversing handle into Forward

or Reverse position. During heating engine, need to pull choke lever to ON position.

2) Turn engine switch to ON position.

3) Gently pull recoil handle till felling felt resistance, then quickly pulled, slowly back into

handle.

4). After starting engine, if choke lever in OFF position, slowly move it to ON position, let

engine warm, start to work after idling five minutes

5)After warm-up engine is running, Push the front valve, road roller forward; After shift

valve , road roller backward walking.

6)Pull back throttle lever, road roller starts working

1) If Emergency, simply pull handle to stop position.

2) Under normal circumstances, pull handle to stop position, push throttle lever forward,

engine idling running , then push engine switch to OFF position.

AGT

5/7

Note:

○ maintenance issues

● emissions associated with project

* Replace paper part only

(1) In dusty places, plus ground maintenance.

(2) unless user has proper tools and maintenance capability.

(3) engine for commercial purposes, record running time, to determine maintenance time.

AGT

6/7

7 Common Problem

Engine can not be

started Possible Causes Approach

1Check control

position

Fuel valve not open Pull valve to open (ON)

Open choke Close choke

engine switch not open engine switch to open(ON)

2 Check fuel

No petrol Gas up

Gasoline

metamorphism

added gone gasoline

Drain fuel tank, carburetor

fuel, adding new gasoline

3Remove spark

plug inspection

spark plug is damaged,

dirty and incorrect gap

Clean, adjust gap or replace

spark plugs

Fuel wet spark plug Dried Refit spark plug, pull

valve lever to fastest position

Lack of engine power Possible Causes Approach

1 Check air filter Filter blocked Clean or replace

filter

2Check fuel

Gasoline

metamorphism

added gone gasoline

Drain fuel tank,

carburetor fuel,

adding new

gasoline

AGT

7/7

8Hydraulic System

AGT

AGT INDUSTRIAL AGT-SVH60 Owner's manual

AGT INDUSTRIAL AGT-SVH60 Owner's manual

AGT INDUSTRIAL AGT-SVH60 Owner's manual

Related papers

Other documents